Chapter 3 Chemical reactions and equations

Practice questions

Which of these does NOT help prevent rancidity?

  1. Adding antioxidants
  2. Storing in airtight containers
  3. Leaving fried food open to air for days
  4. Keeping out oxygen
Answer and explanation

Answer: C

Rancidity is air oxidation. Leaving food open to air for a long time encourages it; the other three reduce contact with oxygen or slow oxidation.

In the rusting of iron, the reaction at the anode region is:

  1. O₂ + 4H⁺ + 4e⁻ → 2H₂O
  2. Fe → Fe²⁺ + 2e⁻
  3. Fe³⁺ + e⁻ → Fe²⁺
  4. 2H₂O → 2H₂ + O₂
Answer and explanation

Answer: B

At the anode iron is oxidised, losing electrons: Fe → Fe²⁺ + 2e⁻. Oxygen is reduced at the cathode.

Ethyl alcohol is converted to acetic acid by acidified potassium dichromate. The dichromate acts as:

  1. A reducing agent
  2. A catalyst only
  3. A product
  4. An oxidising agent supplying nascent oxygen
Answer and explanation

Answer: D

Acidified K₂Cr₂O₇ makes oxygen available as nascent oxygen [O], which oxidises ethyl alcohol to acetic acid. It is an oxidant.

In PbO + C → Pb + CO, the substance reduced is:

  1. PbO
  2. C
  3. Pb
  4. CO
Answer and explanation

Answer: A

Lead oxide loses oxygen to become lead, so it is reduced. Carbon gains oxygen to form carbon monoxide, so it is oxidised.

Potassium chlorate decomposes slowly on heating but quickly when a little MnO₂ is added. MnO₂ is unchanged at the end. MnO₂ acts as:

  1. A reactant
  2. An oxidant
  3. A catalyst
  4. A product
Answer and explanation

Answer: C

A substance that increases the rate of a reaction without undergoing any chemical change is a catalyst.

Milk sets into curd faster in summer than in winter. Which factor explains this?

  1. Particle size
  2. Concentration
  3. Catalyst
  4. Temperature
Answer and explanation

Answer: D

A higher temperature increases the rate of the reactions involved, so curd forms sooner in warm weather.

Dissolving sodium hydroxide in water and adding calcium oxide to water are alike because both:

  1. Are exothermic
  2. Are endothermic
  3. Form a precipitate
  4. Are decomposition reactions
Answer and explanation

Answer: A

Both release heat. The difference is that NaOH dissolving is a physical process, while CaO + H₂O → Ca(OH)₂ is a chemical (combination) reaction.

Zinc is added to copper sulphate solution. What do you observe?

  1. The solution turns from colourless to blue
  2. The blue colour fades and reddish copper is deposited
  3. A yellow precipitate forms
  4. No change, as copper is more reactive
Answer and explanation

Answer: B

Zinc is more reactive than copper and displaces it: CuSO₄ + Zn → ZnSO₄ + Cu. Zinc sulphate is colourless, so the blue colour fades and copper separates out.

Which reaction is a decomposition reaction?

  1. 2Mg + O₂ → 2MgO
  2. Fe + CuSO₄ → FeSO₄ + Cu
  3. NH₃ + HCl → NH₄Cl
  4. C₁₂H₂₂O₁₁ → 12C + 11H₂O on heating
Answer and explanation

Answer: D

Sugar, a single reactant, breaks into carbon and water on heating, so it is a decomposition. The others are combination, displacement and combination.

A white precipitate forms when barium chloride solution is added to sodium sulphate solution. The precipitate and reaction type are:

  1. NaCl; displacement
  2. BaSO₄; double displacement
  3. BaCl₂; combination
  4. Na₂SO₄; decomposition
Answer and explanation

Answer: B

BaCl₂ + Na₂SO₄ → BaSO₄↓ + 2NaCl. The ions are exchanged and insoluble barium sulphate precipitates: double displacement.

Balance: Na + O₂ → Na₂O. The factors in order are:

  1. 4, 1, 2
  2. 2, 1, 1
  3. 2, 1, 2
  4. 4, 2, 2
Answer and explanation

Answer: A

O₂ gives 2 oxygen atoms, so 2Na₂O. That has 4 sodium atoms, so 4Na. 4Na + O₂ → 2Na₂O. Check: Na 4 = 4, O 2 = 2.

Balance: Fe + H₂O → Fe₃O₄ + H₂ (iron heated in steam). The factors in order are:

  1. 1, 1, 1, 1
  2. 3, 4, 1, 4
  3. 3, 2, 1, 2
  4. 2, 4, 1, 4
Answer and explanation

Answer: B

Iron: 3 in Fe₃O₄, so 3Fe. Oxygen: 4 in Fe₃O₄, so 4H₂O. Hydrogen on the left is then 8, so 4H₂. 3Fe + 4H₂O → Fe₃O₄ + 4H₂. Check: Fe 3 = 3, O 4 = 4, H 8 = 8.

Copper reacts with concentrated nitric acid to give a reddish-brown gas. Which gas is it?

  1. Nitric oxide (NO)
  2. Hydrogen
  3. Nitrogen dioxide (NO₂)
  4. Oxygen
Answer and explanation

Answer: C

Cu + 4HNO₃ (concentrated) → Cu(NO₃)₂ + 2NO₂ + 2H₂O. Nitrogen dioxide is reddish-brown. Dilute nitric acid gives nitric oxide instead.

In Zn(s) + 2HCl(aq) → ZnCl₂(aq) + H₂↑, what does the upward arrow show?

  1. Hydrogen is given off as a gas
  2. Hydrogen is a precipitate
  3. Heat is supplied
  4. The reaction is fast
Answer and explanation

Answer: A

An upward arrow after a product shows that it is a gas that escapes. A downward arrow would show a precipitate.

Which pair contains one physical change and one chemical change, in that order?

  1. Cooking rice; melting butter
  2. Breaking a glass; digestion of food
  3. Rusting of iron; ripening of fruit
  4. Melting ice; evaporating water
Answer and explanation

Answer: B

Breaking glass changes only shape (physical). Digestion forms new substances (chemical). The other pairs are in the wrong order or both of one kind.

Why is oil stored in airtight containers for long periods?

  1. To prevent its evaporation into the kitchen
  2. To slow down its air oxidation, which causes rancidity
  3. To keep it warm
  4. To stop it from freezing
Answer and explanation

Answer: B

Rancidity is caused by oxidation by oxygen from the air. An airtight container keeps out fresh air, so oxidation is slowed down.

Which pair of conditions is necessary for iron to rust?

  1. Air only
  2. Water only
  3. Salt and heat
  4. Both air (oxygen) and water
Answer and explanation

Answer: D

Nails kept in dry air or in boiled water sealed with oil do not rust. Both oxygen and water are needed; salt only speeds rusting up.

In 2CuO + C → 2Cu + CO₂, the oxidising agent is:

  1. CuO
  2. C
  3. Cu
  4. CO₂
Answer and explanation

Answer: A

Copper oxide loses oxygen (it is reduced) and in doing so oxidises carbon, which gains oxygen. The substance that is reduced is the oxidant, so CuO is the oxidising agent.

The change Fe²⁺ → Fe³⁺ is an oxidation because the ion:

  1. Gains an electron
  2. Gains oxygen
  3. Loses an electron
  4. Loses a proton
Answer and explanation

Answer: C

Fe²⁺ → Fe³⁺ + e⁻. The positive charge increases by one because one electron is lost. Losing electrons is oxidation.

Which of these reactions is endothermic?

  1. CaO + H₂O → Ca(OH)₂ + Heat
  2. HCl + NaOH → NaCl + H₂O + Heat
  3. CaCO₃ + Heat → CaO + CO₂
  4. C + O₂ → CO₂ + Heat
Answer and explanation

Answer: C

Heat appears on the reactant side in CaCO₃ + Heat → CaO + CO₂, so heat is absorbed. The other three release heat.

Privacy · Terms · Refunds · Delivery