Chapter 5 Heat

Practice questions

How much steam at 100 °C must condense and cool to 0 °C to melt 160 g of ice at 0 °C?

  1. 20 g
  2. 16 g
  3. 23.7 g
  4. 12800 g
Answer and explanation

Answer: A

Heat needed to melt the ice = 160 × 80 = 12800 cal. Each gram of steam gives 540 + 100 = 640 cal when it condenses and cools to 0 °C. Steam needed = 12800 / 640 = 20 g.

A 200 g copper ball (c = 0.1 cal/g °C) at 100 °C is put in 180 g of water at 20 °C. Ignoring the container, what is the final temperature?

  1. 60 °C
  2. 28 °C
  3. 20 °C
  4. 32 °C
Answer and explanation

Answer: B

Heat lost by copper = 200 × 0.1 × (100 − T) = 20(100 − T). Heat gained by water = 180 × 1 × (T − 20). So 2000 − 20T = 180T − 3600, 200T = 5600 and T = 28 °C.

50 g of water at 90 °C is mixed with 100 g of water at 30 °C with no heat loss. What is the final temperature?

  1. 50 °C
  2. 60 °C
  3. 45 °C
  4. 40 °C
Answer and explanation

Answer: A

50(90 − T) = 100(T − 30): 4500 − 50T = 100T − 3000, so 150T = 7500 and T = 50 °C.

Which statement about specific heat capacity is correct?

  1. It is the same for all substances
  2. It is the heat needed to raise unit mass of a substance by 1 °C
  3. Its SI unit is J/kg
  4. Water has a very low specific heat capacity
Answer and explanation

Answer: B

Specific heat capacity is heat per unit mass per degree; its SI unit is J/kg °C. It differs between substances, and water's is very high.

A 500 g aluminium pan (c = 0.2 cal/g °C) is heated from 30 °C to 130 °C. How much heat does it absorb?

  1. 100 cal
  2. 50000 cal
  3. 13000 cal
  4. 10000 cal
Answer and explanation

Answer: D

Q = m c ΔT = 500 × 0.2 × (130 − 30) = 500 × 0.2 × 100 = 10000 cal.

Why is the range 14.5 °C to 15.5 °C stated in the definition of the calorie?

  1. Because water boils at 15 °C
  2. Because the heat needed to warm water by 1 °C differs slightly in different ranges
  3. Because water is densest there
  4. Because it is room temperature everywhere
Answer and explanation

Answer: B

The heat needed for a 1 °C rise is slightly different at different temperatures, so a definite range is fixed to make the unit exact.

On a humid day, the white trail behind a high-flying aircraft:

  1. Does not form at all
  2. Disappears at once
  3. Turns into rain at once
  4. Lasts for a long time
Answer and explanation

Answer: D

The trail is condensed vapour. In air with high relative humidity it evaporates slowly, so it lasts long; in dry air it is short or absent.

Drops form on the outside of a cold bottle from the refrigerator because:

  1. Water leaks through the glass
  2. The bottle sweats
  3. Air touching the bottle is cooled below its dew point and vapour condenses
  4. The bottle absorbs water from inside
Answer and explanation

Answer: C

The cold surface cools the nearby air below its dew point. The air becomes saturated and the excess vapour condenses as droplets on the bottle.

Air in a room holds 7.5 g/m³ of vapour; 15 g/m³ would saturate it. The relative humidity and how the air feels are:

  1. 50%, dry
  2. 50%, humid
  3. 200%, humid
  4. 7.5%, dry
Answer and explanation

Answer: A

Relative humidity = (7.5 / 15) × 100 = 50%. This is below about 60%, so the air feels dry.

Why do water pipes burst in very cold regions in winter?

  1. Water contracts on freezing
  2. Water expands as it cools below 4 °C and on freezing, pushing on the pipe walls
  3. Ice is heavier than water
  4. The pipes contract and crush the water
Answer and explanation

Answer: B

Below 4 °C water expands, and it expands further when it turns to ice. This expansion exerts great force on the pipe and can burst it.

When water is cooled from 4 °C to 0 °C, its volume:

  1. Decreases
  2. Stays the same
  3. First increases then decreases
  4. Increases
Answer and explanation

Answer: D

Water has its minimum volume at 4 °C. Cooling it below 4 °C makes it expand, so its volume increases.

Two pieces of ice pressed together for a while stick to each other. The reason is:

  1. Anomalous expansion
  2. High specific heat of ice
  3. Regelation: ice melts under pressure and refreezes when pressure is released
  4. Evaporation
Answer and explanation

Answer: C

At the points of contact, pressure lowers the melting point and a thin layer melts. When the pressure is released, it refreezes and joins the pieces.

During the change of a liquid into a solid, the latent heat is:

  1. Given out
  2. Absorbed
  3. Zero
  4. Converted into mass
Answer and explanation

Answer: A

Freezing is the reverse of melting, so the latent heat absorbed during melting is given out during freezing.

How much heat is needed to change 5 g of ice at 0 °C into water at 20 °C?

  1. 400 cal
  2. 100 cal
  3. 500 cal
  4. 2700 cal
Answer and explanation

Answer: C

Melt: 5 × 80 = 400 cal. Warm: 5 × 1 × 20 = 100 cal. Total = 500 cal.

On the temperature-time graph for heating ice, why is the graph flat at 0 °C?

  1. The burner is switched off
  2. Heat is absorbed as latent heat of fusion and the temperature does not rise until all the ice melts
  3. Ice cannot absorb heat
  4. The thermometer stops working
Answer and explanation

Answer: B

During melting, heat is used to weaken the bonds between molecules, so the temperature stays at the melting point until all the ice has melted.

Why does a burn from steam at 100 °C hurt more than one from water at 100 °C?

  1. Steam is hotter than 100 °C
  2. Steam gives out its large latent heat of vaporisation as it condenses on the skin
  3. Water has no heat
  4. Steam has a lower specific heat
Answer and explanation

Answer: B

Each gram of steam releases 540 cal of latent heat when it condenses on the skin, in addition to the heat released as the water cools. Boiling water releases only the second part.

How much ice at 0 °C will just melt using 1600 cal of heat? (L = 80 cal/g)

  1. 20 g
  2. 128000 g
  3. 1680 g
  4. 80 g
Answer and explanation

Answer: A

m = Q / L = 1600 / 80 = 20 g.

200 g of water at 60 °C is mixed with 200 g of water at 20 °C with no heat loss. What is the final temperature?

  1. 80 °C
  2. 30 °C
  3. 40 °C
  4. 50 °C
Answer and explanation

Answer: C

200(60 − T) = 200(T − 20), so 60 − T = T − 20, 2T = 80 and T = 40 °C. With equal masses the final temperature is the average.

Which property of a substance is commonly measured using the mixing method in a calorimeter?

  1. Density
  2. Specific heat capacity
  3. Boiling point
  4. Relative humidity
Answer and explanation

Answer: B

By balancing the heat lost by a hot solid against the heat gained by water and calorimeter, the specific heat capacity of the solid can be calculated.

The principle of heat exchange states that, when no heat is lost to the surroundings:

  1. Heat lost by the hot body = heat gained by the cold body
  2. Temperature lost = temperature gained
  3. The cold body loses heat
  4. Both bodies lose heat
Answer and explanation

Answer: A

Heat flows from the hot body to the cold one until their temperatures are equal. In an isolated system the heat lost by one equals the heat gained by the other.

Privacy · Terms · Refunds · Delivery