Chapter 5 Towards Green Energy
Practice questions
In a solar thermal power plant, sunlight is first converted into
- DC electricity
- heat at an absorber
- chemical energy in batteries
- nuclear energy
Answer and explanation
Answer: B
Reflectors focus sunlight onto an absorber where it becomes heat; the heat makes steam for the turbine.
A solar panel receives 400 W of sunlight and is 15% efficient. Its electrical output is
- 15 W
- 40 W
- 85 W
- 60 W
Answer and explanation
Answer: D
15% of 400 W = 0.15 × 400 = 60 W.
Panels give 18 V and 3 A each. How many panels are needed for an array giving 54 V and 6 A?
- 3
- 6
- 9
- 18
Answer and explanation
Answer: B
54 ÷ 18 = 3 panels in series per string; 6 ÷ 3 = 2 strings in parallel; 3 × 2 = 6 panels.
Ten 100 cm² cells (0.5 V, 3 A each) are joined in series. The output is
- 5 V and 3 A
- 0.5 V and 30 A
- 5 V and 30 A
- 50 V and 3 A
Answer and explanation
Answer: A
In series the voltages add: 10 × 0.5 = 5 V; the current remains that of one cell, 3 A.
A wind farm needs 7 MW from turbines of 3,500 kW each at full capacity. How many turbines are needed?
- 7
- 3
- 2
- 35
Answer and explanation
Answer: C
7 MW = 7,000 kW; 7,000 ÷ 3,500 = 2 turbines.
500 kg of water falls 40 m (g = 10 m/s²). The potential energy released is
- 20,000 J
- 2,00,000 J
- 2,000 J
- 20,00,000 J
Answer and explanation
Answer: B
PE = mgh = 500 × 10 × 40 = 2,00,000 J.
Water is taken to the turbine from about the middle of a dam's height mainly because
- it gives a good drop while keeping a dependable supply as the level changes
- water at the top is too heavy
- the generator is there
- it avoids electromagnetic induction
Answer and explanation
Answer: A
A middle intake gives a useful height of fall and still draws water when the level drops, while avoiding silt at the very bottom.
Why is electricity from coal NOT called green energy?
- Coal is renewable
- Coal plants use turbines
- Burning coal pollutes the air and coal reserves are limited
- Coal gives DC
Answer and explanation
Answer: C
Coal emits CO2, sulphur and nitrogen oxides and soot, and its reserves are limited, so it is not environment friendly.
Which energy change is correct for a nuclear power plant?
- Nuclear → thermal → kinetic → electrical
- Chemical → thermal → kinetic → electrical
- Potential → kinetic → electrical
- Light → electrical
Answer and explanation
Answer: A
Fission releases nuclear energy as heat, which makes steam; the steam turns the turbine and the generator gives electricity.
U-235 + neutron → U-236 → Ba-141 + Kr-92 + x neutrons. Using the mass numbers, x is
- 1
- 2
- 4
- 3
Answer and explanation
Answer: D
Left: 235 + 1 = 236. Right: 141 + 92 = 233, so 236 − 233 = 3 neutrons.
Which statement about natural gas plants is correct?
- They produce radioactive waste
- They are more efficient than coal plants and emit no sulphur oxides
- They use a steam turbine
- They need no fuel
Answer and explanation
Answer: B
Gas plants burn natural gas, which has no sulphur, in a combustion chamber driving a gas turbine; they are more efficient than coal plants.
A gas plant converts chemical energy → kinetic energy of gases → kinetic energy of turbine → electrical energy. How many energy conversions is that?
- 2
- 4
- 3
- 5
Answer and explanation
Answer: C
There are four forms in the chain, so there are 3 conversions between them.
The tall stack of a thermal power plant
- releases combustion gases from the boiler
- cools the condenser water
- stores coal
- produces steam
Answer and explanation
Answer: A
The stack carries flue gases from burning coal high into the atmosphere. The cooling tower cools the condenser water.
Which part is common to thermal, nuclear, natural gas, hydroelectric and wind power stations?
- Boiler
- Penstock
- Nuclear reactor
- Turbine and generator
Answer and explanation
Answer: D
All of these drive a turbine that turns a generator; only the energy source and turbine design differ.
In a large commercial generator, electricity is produced because
- the coil is heated
- a rotating magnet changes the magnetic field around fixed coils
- steam flows through the coils
- the coils store charge
Answer and explanation
Answer: B
Rotating the magnet keeps changing the magnetic field around the coils, inducing a potential difference by electromagnetic induction.
Which method of generating electricity does NOT use electromagnetic induction?
- Solar thermal plant
- Wind turbine
- Solar photovoltaic cell
- Hydroelectric plant
Answer and explanation
Answer: C
Photovoltaic cells convert sunlight directly into electricity without any generator. The others drive a turbine and generator.
Which device converts the DC from solar panels into AC?
- Transformer
- Generator
- Gear box
- Inverter
Answer and explanation
Answer: D
An inverter is the electronic device that converts DC into AC. A transformer changes the voltage of AC.
How many 0.5 V cells must be joined in series to obtain 12 V?
- 24
- 6
- 12
- 36
Answer and explanation
Answer: A
In series the voltages add, so the number of cells = 12 ÷ 0.5 = 24.
Two identical solar cells of 0.5 V and 3 A are joined in parallel. The combination gives
- 1 V and 3 A
- 0.5 V and 6 A
- 1 V and 6 A
- 0.5 V and 3 A
Answer and explanation
Answer: B
In parallel the currents add (3 + 3 = 6 A) while the potential difference stays that of one cell, 0.5 V.
A silicon solar cell has an area of 50 cm². Using 30 mA per cm², the current it gives is about
- 30 mA
- 0.5 A
- 1.5 A
- 15 A
Answer and explanation
Answer: C
Current = 30 mA/cm² × 50 cm² = 1,500 mA = 1.5 A. Its potential difference stays about 0.5 V.