Chapter 8 Metallurgy

Practice questions

Copper vessels that have turned green are cleaned with lemon or tamarind because:

  1. Their acids dissolve the basic green copper carbonate layer
  2. They are good conductors
  3. They add a layer of tin
  4. They contain oxygen
Answer and explanation

Answer: A

The green layer is a copper carbonate compound, which is basic. The acids in lemon and tamarind react with it and remove it.

Which method of corrosion prevention coats a less reactive metal on a more reactive one using electrolysis?

  1. Galvanising
  2. Tinning
  3. Alloying
  4. Electroplating
Answer and explanation

Answer: D

Electroplating deposits a thin layer of a less reactive metal, such as silver or gold, on another metal by electrolysis.

Which process converts zinc carbonate into zinc oxide?

  1. Roasting in excess air
  2. Calcination in limited air
  3. Electrolysis
  4. Leaching
Answer and explanation

Answer: B

Carbonate ores are calcined, heated strongly in a limited supply of air: ZnCO₃ → ZnO + CO₂.

In Bayer's process, why does alumina dissolve in sodium hydroxide while iron oxide does not?

  1. Alumina is a metal
  2. Iron oxide is amphoteric
  3. Alumina is amphoteric and forms soluble sodium aluminate
  4. Sodium hydroxide is an acid
Answer and explanation

Answer: C

Aluminium oxide is amphoteric, so it reacts with the base NaOH to form water-soluble sodium aluminate. Iron oxide does not dissolve and is filtered off.

Why is pine oil used in froth flotation?

  1. It wets the sulphide ore particles, which then rise with the froth
  2. It dissolves the gangue
  3. It makes the gangue magnetic
  4. It reduces the ore to metal
Answer and explanation

Answer: A

Sulphide ore particles are hydrophobic and are wetted by the oil; they rise with the froth while water-wetted gangue sinks.

In cassiterite, tin oxide is separated from ferrous tungstate by:

  1. Froth flotation
  2. Leaching
  3. Magnetic separation
  4. Calcination
Answer and explanation

Answer: C

Ferrous tungstate is magnetic and tin oxide is not, so a magnetic roller separates them.

Which statement about ores is correct?

  1. Every mineral is an ore
  2. An ore is a mineral from which a metal can be extracted economically
  3. Ores contain no gangue
  4. Gold is always found as an ore
Answer and explanation

Answer: B

Ores are those minerals from which the metal can be separated profitably. All ores are minerals, not all minerals are ores. Ores contain gangue, and gold is usually found free.

Ionic compounds are called electrolytes because they:

  1. Conduct electricity in the solid state
  2. Are made of molecules
  3. Conduct electricity when molten or dissolved in water
  4. Produce electricity on their own
Answer and explanation

Answer: C

Their ions become mobile when molten or dissolved, so they conduct electricity and can be decomposed by it; hence they are called electrolytes.

Ionic compounds dissolve in water but not in kerosene because:

  1. Kerosene is too heavy
  2. Water molecules can surround and attract the separated ions; kerosene cannot
  3. Ionic compounds react with kerosene
  4. Water is an ionic compound
Answer and explanation

Answer: B

Water molecules orient around the ions and form new attractions that replace those in the crystal. Kerosene and petrol cannot form such attractions, so ionic compounds do not dissolve in them.

Which pair of reactions is typical of chlorine but NOT of most nonmetals?

  1. Reacting with oxygen and with hydrogen
  2. Forming acidic oxides
  3. Reacting with water and with dilute acids
  4. Being a solid at room temperature
Answer and explanation

Answer: C

Most nonmetals do not react with water or dilute acids; halogens such as chlorine do: Cl₂ + H₂O → HOCl + HCl and Cl₂ + 2HBr → 2HCl + Br₂.

A zinc strip is kept in lead nitrate solution. After some time a grey coating appears on the strip. The reaction is:

  1. Zn + Pb(NO₃)₂ → Zn(NO₃)₂ + Pb
  2. Pb + Zn(NO₃)₂ → Pb(NO₃)₂ + Zn
  3. Zn + Pb(NO₃)₂ → no reaction
  4. Zn + Pb(NO₃)₂ → ZnO + Pb + 2NO₂
Answer and explanation

Answer: A

Zinc is above lead in the reactivity series, so it displaces lead from lead nitrate; grey lead deposits on the strip.

Which balanced equation shows zinc reacting with dilute hydrochloric acid?

  1. Zn + HCl → ZnCl + H
  2. Zn + 2HCl → ZnCl₂ + H₂
  3. Zn + HCl → ZnCl₂ + H₂
  4. 2Zn + HCl → Zn₂Cl + H₂
Answer and explanation

Answer: B

Zinc forms Zn²⁺, so the salt is ZnCl₂; two HCl give 2 Cl and 2 H, which form H₂. Zn + 2HCl → ZnCl₂ + H₂ is balanced.

A metal floats on water while reacting slowly with it, with bubbles of gas sticking to it. The metal is most likely:

  1. Calcium
  2. Iron
  3. Copper
  4. Gold
Answer and explanation

Answer: A

Calcium reacts slowly with water: Ca + 2H₂O → Ca(OH)₂ + H₂. The hydrogen bubbles sticking to it make it float. Iron needs steam; copper and gold do not react.

Which metal has the highest melting point?

  1. Mercury
  2. Sodium
  3. Gallium
  4. Tungsten
Answer and explanation

Answer: D

Tungsten melts at about 3422 °C, the highest of all metals, which is why it is used for bulb filaments. The other three melt at low temperatures.

Which element is a nonmetal that has lustre?

  1. Iodine
  2. Bromine
  3. Sulphur
  4. Graphite
Answer and explanation

Answer: A

Nonmetals usually have no lustre, but iodine crystals are shiny. Bromine is a liquid, sulphur is dull yellow, and graphite is notable for conducting electricity.

Which is an amalgam?

  1. Bronze
  2. Stainless steel
  3. Brass
  4. An alloy of sodium with mercury
Answer and explanation

Answer: D

An amalgam is an alloy in which one of the metals is mercury, such as sodium amalgam.

Galvanising protects iron by coating it with:

  1. Tin
  2. Zinc
  3. Paint
  4. Copper
Answer and explanation

Answer: B

A thin layer of zinc is applied. Zinc, being more electropositive, corrodes first and protects the iron below.

Why do silver articles turn black in air?

  1. They form silver oxide with oxygen
  2. They form silver sulphide with hydrogen sulphide in the air
  3. They absorb dust
  4. They form silver carbonate
Answer and explanation

Answer: B

Silver reacts with traces of hydrogen sulphide in air to form black silver sulphide, Ag₂S.

In the thermit reaction Fe₂O₃ + 2Al → 2Fe + Al₂O₃, aluminium acts as:

  1. An oxidising agent
  2. A catalyst
  3. A reducing agent
  4. A gangue
Answer and explanation

Answer: C

Aluminium takes oxygen from iron oxide, reducing it to iron, while aluminium itself is oxidised. So aluminium is the reducing agent.

Heating a sulphide ore strongly in excess air to convert it into an oxide is called:

  1. Calcination
  2. Roasting
  3. Leaching
  4. Anodising
Answer and explanation

Answer: B

Roasting converts sulphide ores to oxides in excess air, e.g. 2ZnS + 3O₂ → 2ZnO + 2SO₂. Calcination is for carbonate ores in limited air.

Privacy · Terms · Refunds · Delivery