Chapter 4 Constructions of Triangles

Practice questions

Which given information calls for drawing a segment equal to the perimeter first?

  1. Base, ∠B and AB + AC
  2. Perimeter, ∠B and ∠C
  3. Base, ∠B and AB − AC
  4. Two sides and the included angle
Answer and explanation

Answer: B

Construction III (perimeter and the two base angles) starts by drawing PQ equal to the perimeter and using half the base angles at P and Q.

The perimeter of a triangle is 15.6 cm and the sides are in the ratio 3 : 4 : 5. What is the shortest side?

  1. 2.6 cm
  2. 5.2 cm
  3. 3.9 cm
  4. 6.5 cm
Answer and explanation

Answer: C

3 + 4 + 5 = 12 parts, one part = 15.6 ÷ 12 = 1.3 cm. The shortest side = 3 × 1.3 = 3.9 cm (the others are 5.2 cm and 6.5 cm).

In Construction III, why does C lie on the perpendicular bisector of seg AQ?

  1. Because CQ = CA
  2. Because C is the midpoint of PQ
  3. Because ∠C = 90°
  4. Because AQ is parallel to BC
Answer and explanation

Answer: A

Q is placed so that CQ = AC. C is equidistant from A and Q, so it lies on the perpendicular bisector of seg AQ.

In Construction III with ∠B = 64° and ∠C = 72°, what is ∠PAQ in △APQ?

  1. 136°
  2. 68°
  3. 112°
  4. 44°
Answer and explanation

Answer: C

The angles at P and Q are 32° and 36°. So ∠PAQ = 180° − 32° − 36° = 112°.

For a triangle with base 5 cm, what is true about the difference of the other two sides?

  1. It must be less than 5 cm
  2. It must be more than 5 cm
  3. It must equal 5 cm
  4. It can be any length
Answer and explanation

Answer: A

By the triangle inequality, the difference of two sides of a triangle is less than the third side, here 5 cm.

Given YZ, ∠Z and XY − XZ = 1.5 cm, which case of Construction II applies, working from Z?

  1. Case 1, D on ray ZX
  2. Construction I
  3. Construction III
  4. Case 2, D on the opposite ray of ray ZX
Answer and explanation

Answer: D

The side at ∠Z is XZ, and it comes second in XY − XZ, so it is the shorter side. That is case 2: D goes on the opposite ray of ray ZX with ZD = 1.5 cm.

Given BC = 6 cm, ∠B = 100° and AC − AB = 2.5 cm, which step is correct?

  1. Mark D on ray BA with BD = 2.5 cm
  2. Mark D on seg BC with BD = 2.5 cm
  3. Mark D on the opposite ray of ray BA with BD = 2.5 cm
  4. Draw PQ = 8.5 cm
Answer and explanation

Answer: C

AB, the side at ∠B, is the shorter side (AC − AB > 0), so this is case 2: D goes on the opposite ray with BD = 2.5 cm.

In case 1 of Construction II, BD = AB − AC. Which statement correctly shows AD = AC?

  1. AD = AB + BD = AC
  2. AD = AB − BD = AB − (AB − AC) = AC
  3. AD = BC − BD
  4. AD = BD + DC
Answer and explanation

Answer: B

D lies between B and A, so AD = AB − BD. Substituting BD = AB − AC gives AD = AC.

Given BC = 7.2 cm, ∠B = 45° and AB − AC = 2.7 cm, where is D placed?

  1. On ray BA, with BD = 2.7 cm
  2. On the opposite ray of BA, with BD = 2.7 cm
  3. On ray CB, with CD = 2.7 cm
  4. On ray BA, with BD = 9.9 cm
Answer and explanation

Answer: A

AB − AC is positive, so AB (the side at ∠B) is longer: case 1. D goes on ray BA with BD = 2.7 cm.

For BC = 6 cm and ∠B = 40°, which given sum AB + AC makes the construction impossible?

  1. 6.5 cm
  2. 9 cm
  3. 11 cm
  4. 5.5 cm
Answer and explanation

Answer: D

AB + AC must be greater than BC = 6 cm. 5.5 cm is not, so no triangle can be drawn.

In Construction I (angle at B), which segment's perpendicular bisector is drawn?

  1. Seg DC
  2. Seg BD
  3. Seg BC
  4. Seg AD
Answer and explanation

Answer: A

D is on the ray at B with BD = AB + AC. Since AD = AC, A lies on the perpendicular bisector of seg DC.

Construct △PQR with QR = 5.2 cm, ∠Q = 45° and perimeter 13 cm. How long is QD on the ray at Q?

  1. 13 cm
  2. 5.2 cm
  3. 7.8 cm
  4. 18.2 cm
Answer and explanation

Answer: C

PQ + PR = 13 − 5.2 = 7.8 cm, so QD = 7.8 cm and then the perpendicular bisector of DR gives P.

Construct △ABC with BC = 5 cm, ∠B = 70°, AB + AC = 8.2 cm. In the fair figure AB measures 4.6 cm. What should AC measure?

  1. 3.4 cm
  2. 3.6 cm
  3. 4.6 cm
  4. 13.2 cm
Answer and explanation

Answer: B

AB + AC = 8.2 cm, so AC = 8.2 − 4.6 = 3.6 cm.

To draw the perpendicular bisector of a 9 cm segment, the compass opening must be

  1. exactly 4.5 cm
  2. less than 4.5 cm
  3. exactly 9 cm only
  4. more than 4.5 cm
Answer and explanation

Answer: D

The arcs from the two ends must cross, which needs a radius greater than half the segment, more than 4.5 cm.

Which property is used to locate the vertex in every new construction of this chapter?

  1. A point on two lines is their point of intersection
  2. Opposite angles of a parallelogram are equal
  3. The angles of a quadrilateral add up to 360°
  4. A tangent is perpendicular to the radius
Answer and explanation

Answer: A

Each construction finds two lines the vertex must lie on (a ray and a perpendicular bisector, or two rays) and takes their point of intersection.

The perimeter of a triangle is 12.6 cm and its sides are in the ratio 3 : 4 : 5. What is the longest side?

  1. 4.2 cm
  2. 3.15 cm
  3. 5.25 cm
  4. 6.3 cm
Answer and explanation

Answer: C

3 + 4 + 5 = 12 parts, so one part = 12.6 ÷ 12 = 1.05 cm. The longest side = 5 × 1.05 = 5.25 cm.

A triangle has perimeter 16 cm and sides in the ratio 3 : 5 : 8. Can it be constructed?

  1. Yes, with sides 3, 5 and 8 cm
  2. Yes, with sides 6, 10 and 16 cm
  3. No, because 3 + 5 = 8 parts, so two sides would equal the third
  4. No, because the perimeter must be even
Answer and explanation

Answer: C

One part = 16 ÷ 16 = 1 cm, giving sides 3, 5 and 8 cm. But 3 + 5 = 8, not greater than 8, so the triangle inequality fails and no triangle exists.

After locating A, how is point B found?

  1. As the midpoint of PQ
  2. By drawing the bisector of ∠A
  3. By measuring BC
  4. Where the perpendicular bisector of seg AP cuts PQ
Answer and explanation

Answer: D

BA = BP, so B is equidistant from A and P and lies on the perpendicular bisector of seg AP; it is where that bisector meets PQ.

Why is ∠APB equal to half of ∠ABC?

  1. Because PB = BA makes △PBA isosceles, and ∠ABC is its exterior angle equal to ∠APB + ∠PAB
  2. Because AP is a median
  3. Because PQ is parallel to BC
  4. Because ∠ABC is a right angle
Answer and explanation

Answer: A

PB = BA gives ∠APB = ∠PAB. ∠ABC is an exterior angle of △PBA, so ∠ABC = ∠APB + ∠PAB = 2∠APB.

In Construction III, ∠B = 80° and ∠C = 50°. What angles are drawn at P and Q?

  1. 80° and 50°
  2. 40° and 25°
  3. 160° and 100°
  4. 50° and 80°
Answer and explanation

Answer: B

The angles at P and Q are half the base angles: ½ × 80° = 40° at P and ½ × 50° = 25° at Q.

Privacy · Terms · Refunds · Delivery