Paper Cutting

Practice questions

Which step of the routine should come immediately before counting the cut-outs?

  1. Drawing the packet again
  2. Choosing the shape of the cut
  3. Merging copies that touch
  4. Adding up the layers
Answer and explanation

Answer: C

Counting before merging gives the wrong number, because copies that share a side form one cut-out.

After a diagonal fold from (0, 0) to (8, 8), a square at x from 5 to 6 and y from 4 to 5 is cut. Where is the mirror square?

  1. At x from 5 to 6 and y from 3 to 4
  2. At x from 3 to 4 and y from 4 to 5
  3. At x from 2 to 3 and y from 4 to 5
  4. At x from 4 to 5 and y from 5 to 6
Answer and explanation

Answer: D

A diagonal fold along y = x swaps the coordinates, so (x, y) goes to (y, x).

A twice-folded packet has a 1 by 1 square with one side on a crease. How many cut-outs appear, and how big is each?

  1. 2, each 1 by 2
  2. 4, each 1 by 1
  3. 1, which is 2 by 2
  4. 2, each 1 by 1
Answer and explanation

Answer: A

The square joins its copy across the crease, making a 1 by 2 piece, and the other fold doubles this into two such pieces.

In the fold-back packet above (x from 4 to 6), the places on the sheet that make up a point x are x, 8 - x, 12 - x and which other?

  1. 4 - x
  2. x + 4
  3. x - 4
  4. x - 8
Answer and explanation

Answer: C

The left-hand flap of the first fold also lies over the packet, and its points are at x - 4 on the open sheet.

The sheet is folded right over left and top over bottom. A 1 by 1 square is cut at the packet's top-right corner, with two sides on the creases. What does the opened sheet show?

  1. Four 1 by 1 squares
  2. A 2 by 2 square in the middle
  3. A 1 by 1 square in the middle
  4. Two rectangles
Answer and explanation

Answer: B

The top-right corner of this packet is the centre of the sheet, so the four copies join into a 2 by 2 square.

In the letter fold, a small square is cut at x from 3 to 4, touching the crease x = 3. How many cut-outs are there?

  1. 2
  2. 1
  3. 3
  4. 4
Answer and explanation

Answer: A

The first two copies join across the crease into a hole 2 wide. The third copy is a separate notch in the right edge.

In a letter fold of a 9 by 6 sheet, a small square is cut in the packet at x from 4 to 5, away from the creases. How many holes does the opened sheet have?

  1. 1
  2. 2
  3. 4
  4. 3
Answer and explanation

Answer: D

There are 3 layers, and the square touches no crease, so there are 3 separate holes.

For the same fold, a small square is cut at x from 4 to 5. At what x do the other hole's edges lie?

  1. From 5 to 6
  2. From 1 to 2
  3. From 3 to 4
  4. From 7 to 8
Answer and explanation

Answer: B

The copy lies at 6 - x, which gives 6 - 5 = 1 to 6 - 4 = 2.

For the same fold, how many layers are there at x from 6 to 9?

  1. 1
  2. 2
  3. 3
  4. 0
Answer and explanation

Answer: A

The flap covers only x from 3 to 6. The right third is a single layer.

The left third of a 9 by 6 sheet is folded over onto the middle third. How many layers does the packet have at x from 3 to 6?

  1. 3
  2. 1
  3. 2
  4. 4
Answer and explanation

Answer: C

The middle third and the flap lie one on top of the other, so there are 2 layers.

A triangle is cut so that only one of its corners touches the crease. What appears?

  1. One large isosceles triangle
  2. Two triangles at a point
  3. A single four-sided rhombus
  4. A six-sided hexagon
Answer and explanation

Answer: B

The triangle and its mirror image share only the one corner on the crease, so they meet at a point.

A right triangle with sides 3, 4 and 5 is cut with its hypotenuse on the crease. What shape appears?

  1. A square
  2. A rectangle
  3. A rhombus
  4. A kite
Answer and explanation

Answer: D

The sides 3, 3, 4, 4 form two pairs of equal neighbouring sides. It is a kite. It is not a rhombus since its sides are not all equal.

An isosceles trapezium is cut with its longer parallel side on the crease. How many sides does the opened shape have?

  1. 5
  2. 4
  3. 6
  4. 8
Answer and explanation

Answer: C

The two slanted sides and the short parallel side are reflected, so there are 6 sides. The shape is a hexagon.

An equilateral triangle is cut with a side on the crease. What shape appears?

  1. A rhombus
  2. A square
  3. A kite
  4. A hexagon
Answer and explanation

Answer: A

The triangle and its mirror image share a side and make a four-sided shape with all sides equal. Its angles are not right angles, so it is a rhombus.

A rectangle is cut with a long side on the crease. What does the opened sheet show?

  1. A larger square
  2. A wider rectangle
  3. A tilted rhombus
  4. A regular hexagon
Answer and explanation

Answer: B

The rectangle and its mirror image share the long side, so they form a longer rectangle.

The sheet is folded left over right and then top over bottom. A hole is centred at (5.5, 2.5). Which point is not the centre of a hole?

  1. (5.5, 1.5)
  2. (2.5, 2.5)
  3. (5.5, 5.5)
  4. (2.5, 5.5)
Answer and explanation

Answer: A

The holes are at (5.5, 2.5), (2.5, 2.5), (5.5, 5.5) and (2.5, 5.5). The point (5.5, 1.5) is not among them.

The sheet is folded right over left and then top over bottom. A hole is centred at (1.5, 1.5) in the packet. Which is the centre of one of the other holes?

  1. (5.5, 1.5)
  2. (1.5, 4.5)
  3. (4.5, 1.5)
  4. (6.5, 6.5)
Answer and explanation

Answer: D

Reflecting in x = 4 and y = 4 gives (6.5, 1.5), (1.5, 6.5) and (6.5, 6.5).

The sheet is folded right over left and then top over bottom. Which corner of the packet is a real corner of the sheet?

  1. The top-right corner
  2. The bottom-left corner
  3. The top-left corner
  4. The bottom-right corner
Answer and explanation

Answer: B

The creases are the right and top edges, which meet at the top-right corner, the centre. The real corner is opposite, at the bottom-left.

The sheet is folded left over right and then bottom over top. Which corner of the packet is the centre of the sheet?

  1. The top-left corner
  2. The top-right corner
  3. The bottom-left corner
  4. The bottom-right corner
Answer and explanation

Answer: C

The creases of this packet are its left and bottom edges, which meet at the bottom-left corner.

The sheet is folded right over left. Which edge of the packet is the crease?

  1. The right edge
  2. The left edge
  3. The top edge
  4. The bottom edge
Answer and explanation

Answer: A

The right half is folded over onto the left half, so the crease is on the right of the packet.

Privacy · Terms · Refunds · Delivery