Simple Machines

Practice questions

A bicycle has 48 teeth on the chainwheel and 12 on the rear sprocket. For each pedal turn the rear wheel turns:

  1. 4 times
  2. 12 times
  3. 0.25 times
  4. 36 times
Answer and explanation

Answer: A

Rear wheel turns = 48 ÷ 12 = 4 times.

A windlass has a crank radius of 30 cm and a drum radius of 6 cm. The ideal effort to lift 400 N is:

  1. 24 N
  2. 120 N
  3. 80 N
  4. 2000 N
Answer and explanation

Answer: C

VR = 30 ÷ 6 = 5. Effort = 400 ÷ 5 = 80 N.

In a train, gear A drives B, and B drives C (B has one set of teeth meshing with both). C turns:

  1. Opposite to A and to B
  2. Same as A, opposite to B
  3. Same as B, opposite to A
  4. Not turning at all
Answer and explanation

Answer: B

Each mesh reverses the direction. A and B turn opposite ways, and B and C turn opposite ways, so C turns the same way as A.

A belt connects a pulley of diameter 20 cm turning at 300 rpm to one of diameter 40 cm. The second pulley turns at:

  1. 600 rpm
  2. 150 rpm
  3. 75 rpm
  4. 100 rpm
Answer and explanation

Answer: B

N₂ = 300 × 20 ÷ 40 = 150 rpm.

A gear of 25 teeth running at 240 rpm drives a gear of 60 teeth. The second gear's speed is:

  1. 100 rpm
  2. 575 rpm
  3. 150 rpm
  4. 96 rpm
Answer and explanation

Answer: A

N₂ = 240 × 25 ÷ 60 = 100 rpm.

Which makes the effort smaller for the same height?

  1. A shorter ramp
  2. A longer ramp
  3. A rougher ramp
  4. A heavier crate
Answer and explanation

Answer: B

Effort = W h ÷ l (without friction), so a longer ramp of the same height needs less effort, although the distance is greater.

A system of 3 strands has a 20 N movable block and a 100 N load. Ignoring friction, the effort is:

  1. 33.3 N
  2. 20 N
  3. 40 N
  4. 60 N
Answer and explanation

Answer: C

E = (100 + 20) ÷ 3 = 40 N.

A load of weight 1000 N lies on a smooth slope of angle 30°. The effort along the slope to keep it moving at a steady speed is:

  1. 500 N
  2. 866 N
  3. 1000 N
  4. 250 N
Answer and explanation

Answer: A

E = W sin 30° = 1000 × 0.5 = 500 N.

On the ramp of the previous question, the actual effort is 100 N. The efficiency is:

  1. 125%
  2. 20%
  3. 75%
  4. 80%
Answer and explanation

Answer: D

Efficiency = 80 ÷ 100 = 80%.

A 400 N load is pushed up a ramp 5 m long and 1 m high with no friction. The effort is:

  1. 80 N
  2. 200 N
  3. 100 N
  4. 20 N
Answer and explanation

Answer: A

E = W h ÷ l = 400 × 1 ÷ 5 = 80 N.

The efficiency of a pulley system usually rises as the load is increased because:

  1. The velocity ratio increases
  2. Fixed losses are a smaller share
  3. The rope gets shorter
  4. The effort becomes smaller than the load
Answer and explanation

Answer: B

A large part of the loss is nearly independent of the load, so at larger loads it is a smaller fraction of the work done.

An effort of 40 N moving 5 m lifts a load of 120 N through 1 m. The efficiency is:

  1. 60%
  2. 40%
  3. 80%
  4. 120%
Answer and explanation

Answer: A

Work in = 40 × 5 = 200 J. Work out = 120 × 1 = 120 J. Efficiency = 120 ÷ 200 = 60%.

A winch lifts 1200 N at 0.25 m/s and is 60% efficient. The input power is:

  1. 300 W
  2. 180 W
  3. 750 W
  4. 500 W
Answer and explanation

Answer: D

Output = 1200 × 0.25 = 300 W. Input = 300 ÷ 0.6 = 500 W.

To raise a 720 N load with a machine of VR = 4 and efficiency 90%, the effort needed is:

  1. 200 N
  2. 180 N
  3. 162 N
  4. 250 N
Answer and explanation

Answer: A

E = L ÷ (η × VR) = 720 ÷ 3.6 = 200 N.

A machine with VR = 8 and efficiency 50% is used with an effort of 150 N. The load lifted is:

  1. 300 N
  2. 600 N
  3. 1200 N
  4. 2400 N
Answer and explanation

Answer: B

L = η × E × VR = 0.5 × 150 × 8 = 600 N.

To avoid having to calculate an unknown support force, you should take moments about:

  1. The beam's centre
  2. The load's position
  3. Any point at random
  4. Where the unknown acts
Answer and explanation

Answer: D

A force acting at the pivot has zero moment, so it drops out of the equation.

A lever has a load arm of 0.2 m, and a load of 500 N is lifted by an effort of 100 N. The effort arm is:

  1. 0.04 m
  2. 2.5 m
  3. 1 m
  4. 0.4 m
Answer and explanation

Answer: C

E × effort arm = L × load arm gives 100 × a = 500 × 0.2, so a = 1 m.

An object on a faulty balance weighs 100 g on one pan and 121 g on the other. Its true mass is:

  1. 110.5 g
  2. 110 g
  3. 120 g
  4. 100 g
Answer and explanation

Answer: B

True mass = √(100 × 121) = √12 100 = 110 g, which is the geometric mean, not the average 110.5 g.

A uniform beam of weight 100 N rests on supports at its two ends. A 50 N load is at the centre. Each support carries:

  1. 50 N
  2. 100 N
  3. 75 N
  4. 150 N
Answer and explanation

Answer: C

Total downward force = 150 N, shared equally by symmetry: 75 N each.

A light pole 4 m long carries a 400 N load 1 m from the front person. The front person's share is:

  1. 300 N
  2. 100 N
  3. 200 N
  4. 400 N
Answer and explanation

Answer: A

Moments about the rear person: F × 4 = 400 × 3, so F = 300 N. The rear person carries 100 N.

Privacy · Terms · Refunds · Delivery