Geography Chapter 6 Manufacturing Industries
Practice questions
Which pair of measures best reduces air pollution from a factory?
- Silencers and earplugs
- Rainwater harvesting and recycling water
- Dumping waste on land
- Fitting scrubbers or precipitators and using oil or gas instead of coal
Answer and explanation
Answer: D
Particle-trapping devices on smoke stacks and cleaner fuels reduce air pollution. Silencers and earplugs deal with noise, and water measures deal with water pollution.
A dyeing unit treats its waste water with microbes to break down organic matter. Which stage of treatment is this?
- Primary
- Tertiary
- Secondary
- No treatment
Answer and explanation
Answer: C
Secondary treatment is the biological process. Primary is mechanical (screening, settling), and tertiary combines biological, chemical and physical processes with recycling.
Why did the fertiliser industry spread to many parts of India?
- Because potash reserves were found everywhere
- Because of demand after the Green Revolution
- Because fertilisers are made from sea water only
- Because of shipbuilding
Answer and explanation
Answer: B
The textbook says that after the Green Revolution the fertiliser industry expanded to several other parts of the country. Potash is in fact entirely imported.
Food processing can help farm workers who face disguised unemployment because:
- it closes farms
- it reduces the value of crops
- it imports all food
- it can absorb surplus workers from agriculture into processing jobs
Answer and explanation
Answer: D
The textbook says food processing industries can absorb a major share of workers from agriculture who face disguised unemployment, while adding value to farm produce.
Why does India export cotton yarn while garment makers import fabric?
- Weaving, mostly in small fragmented units, cannot use much of the high-quality yarn produced
- India grows no cotton
- Spinning mills are very weak
- Garments are not made in India
Answer and explanation
Answer: A
The textbook describes this mismatch: spinning is world-class, but the weaving, knitting and processing units cannot use much of the high-quality yarn.
A sugar mill in Maharashtra can crush cane for more months than one in Bihar mainly because:
- Maharashtra has no rain
- the cooler climate gives a longer crushing season
- Bihar has no farmers
- sugar is not made in Bihar
Answer and explanation
Answer: B
The textbook explains that the cooler climate of the southern and western states ensures a longer crushing season, and cane there has higher sucrose content.
Which is NOT one of the problems of the Indian iron and steel industry listed in the textbook?
- Shortage of coking coal
- Irregular energy supply
- Too much sugarcane
- Lower labour productivity
Answer and explanation
Answer: C
Sugarcane has nothing to do with steel. The textbook lists high cost and limited availability of coking coal, lower labour productivity, irregular energy supply and poor infrastructure among the problems.
Why does the Chhota Nagpur plateau have the most iron and steel plants?
- Low-cost iron ore and high-grade raw materials close by, cheap labour and a large home market
- It is on the sea coast
- It has the most sugarcane
- It has no transport needs
Answer and explanation
Answer: A
These are the relative advantages the textbook lists for the Chhota Nagpur region. Heavy raw materials close together keep costs down.
Using the textbook's ratio of about 4 : 2 : 1, how many tonnes of coking coal go with 1,200 tonnes of iron ore?
- 300 tonnes
- 1,200 tonnes
- 2,400 tonnes
- 600 tonnes
Answer and explanation
Answer: D
Coal is 2 parts for every 4 parts of ore, i.e. half. 1,200 ÷ 2 = 600 tonnes. Limestone would be 1,200 ÷ 4 = 300 tonnes.
Which pair is correctly matched?
- TISCO - public sector
- SAIL - cooperative sector
- Oil India Ltd. - joint sector (as given in the textbook)
- BHEL - private sector
Answer and explanation
Answer: C
The textbook gives Oil India Ltd. as its joint sector example. TISCO is its private sector example, while SAIL and BHEL are public sector.
The coir industry of Kerala is given by the textbook as an example of which sector?
- Public
- Cooperative
- Joint
- Private
Answer and explanation
Answer: B
The textbook names the sugar industry in Maharashtra and the coir industry in Kerala as cooperative sector examples, owned by producers or workers who share profits or losses.
Which industry is BOTH mineral-based and basic?
- Sugar
- Toothpaste
- Cotton textiles
- Aluminium smelting
Answer and explanation
Answer: D
Aluminium smelting uses bauxite, a mineral, and its metal is raw material for other industries, so it is mineral-based and basic. Sugar and cotton textiles are agro-based, and toothpaste is a consumer good.
Banks, insurance companies, transport firms and consultants in a big city attract more factories. The benefit factories get is called:
- agglomeration economies
- regional disparity
- disguised unemployment
- thermal pollution
Answer and explanation
Answer: A
When industries cluster to use the services and markets of an urban centre, the shared advantages are agglomeration economies.
Public sector and joint sector industries were set up in tribal and backward areas mainly to:
- reduce exports
- increase dependence on farming
- bring down regional disparities and create jobs
- stop urbanisation completely
Answer and explanation
Answer: C
The textbook says this philosophy aimed at removing unemployment and poverty and bringing down regional disparities by locating industries in tribal and backward areas.
A worker who turns raw cotton into yarn in a mill is engaged in which kind of activity?
- Primary
- Secondary
- Tertiary
- None, because yarn is not a product
Answer and explanation
Answer: B
Processing a raw material (cotton) into a more valuable product (yarn) is manufacturing, a secondary activity. Yarn is an industrial product that is itself used to make cloth.
Which is a health effect of noise pollution mentioned in the textbook?
- Hearing impairment and raised blood pressure
- Better sleep
- Stronger bones
- Clearer eyesight
Answer and explanation
Answer: A
The textbook says noise causes irritation, anger and stress and can cause hearing impairment, increased heart rate and blood pressure.
Fly ash, phospho-gypsum and iron and steel slag are major examples of:
- noise pollutants
- harmful gases
- renewable energy sources
- solid industrial wastes
Answer and explanation
Answer: D
The textbook names fly ash, phospho-gypsum and iron and steel slags as the major solid wastes in India. Dumped on land, they pollute the soil.
Which device helps reduce particles in factory smoke?
- Silencer
- Electrostatic precipitator
- Rainwater tank
- Earplug
Answer and explanation
Answer: B
Electrostatic precipitators, fabric filters, scrubbers and inertial separators fitted to smoke stacks trap particulate matter. Silencers and earplugs deal with noise.
Which treatment stage uses screening, grinding, flocculation and sedimentation?
- Secondary
- Tertiary
- Primary
- None of these
Answer and explanation
Answer: C
Primary treatment is mechanical and includes screening, grinding, flocculation and sedimentation. Secondary is biological; tertiary combines biological, chemical and physical processes.
Thermal pollution of water is caused by:
- releasing hot water from factories and power plants before it cools
- dumping plastic bags
- loud machines near rivers
- spraying pesticides on crops
Answer and explanation
Answer: A
The textbook defines thermal pollution as hot water from factories and thermal plants drained into rivers and ponds before cooling. Warm water holds less oxygen, which harms aquatic life.