Chapter 11 Sound
Practice questions
Why are tiny electronic parts often cleaned with ultrasound?
- Ultrasound melts the dirt
- Ultrasound makes the solution boil
- The parts are placed in a cleaning solution and the high-frequency waves shake dust and grease loose even in hard-to-reach places
- Ultrasound dissolves the metal surface
Answer and explanation
Answer: C
In ultrasonic cleaning the objects sit in a cleaning solution; the high-frequency waves make particles of dust, grease and dirt come off, even from spiral or odd-shaped parts.
Which animal pair, according to the chapter, produces infrasound?
- Bats and dolphins
- Whales and elephants
- Bats and porpoises
- Moths and bats
Answer and explanation
Answer: B
The chapter names whales and elephants (and rhinoceroses) as producing infrasound. Bats, dolphins and porpoises produce ultrasound; certain moths can hear it.
A dog can hear a whistle that most adults cannot. The whistle's frequency is most likely:
- 10 Hz
- 500 Hz
- 23 kHz
- 15 Hz
Answer and explanation
Answer: C
Adults hear up to about 20 kHz; the textbook says dogs hear up to about 25 kHz. A 23 kHz whistle lies in that gap. 10 Hz and 15 Hz are infrasound that dogs are not described as hearing either; 500 Hz is audible to adults.
A stone is dropped into a well 45 m deep. The splash is heard 3.13 s after release (g = 10 m s⁻²). How long does the sound take to come up, and what speed does that give?
- 0.13 s, about 346 m s⁻¹
- 3 s, 15 m s⁻¹
- 0.13 s, 5.85 m s⁻¹
- 3.13 s, about 14 m s⁻¹
Answer and explanation
Answer: A
Fall time: h = ½gt², so 45 = 5t², t² = 9, t = 3 s. Sound time = 3.13 − 3 = 0.13 s. Speed = 45 ÷ 0.13 ≈ 346 m s⁻¹.
Which of these does NOT use multiple reflection of sound?
- A megaphone
- A stethoscope
- A curved soundboard behind a stage
- A hearing aid
Answer and explanation
Answer: D
A hearing aid works electronically: microphone, amplifier and speaker. Megaphones, stethoscopes and soundboards guide sound by reflecting it repeatedly.
A man standing between two cliffs claps. He hears one echo after 1 s and another after 3 s. With sound at 340 m s⁻¹, how far apart are the cliffs?
- 680 m
- 340 m
- 1360 m
- 510 m
Answer and explanation
Answer: A
Near cliff: 340 × 1 ÷ 2 = 170 m. Far cliff: 340 × 3 ÷ 2 = 510 m. They are on opposite sides, so the gap is 170 + 510 = 680 m.
A worker taps one end of a straight iron rail 1190 m long. Using the textbook's value for iron (5950 m s⁻¹), how long does the sound take to travel along the rail to the other end?
- 3.44 s
- 5 s
- 0.2 s
- 0.002 s
Answer and explanation
Answer: C
Time = distance ÷ speed = 1190 ÷ 5950 = 0.2 s. Check: 5950 × 0.2 = 1190. Through air (346 m s⁻¹) the same distance would take about 3.44 s, which is why the sound through the rail arrives first.
A sound wave has speed 340 m s⁻¹ and wavelength 1.6 cm. Its frequency and type are:
- 212.5 Hz, audible
- 21 250 Hz, ultrasound
- 2125 Hz, audible
- 544 Hz, audible
Answer and explanation
Answer: B
λ = 1.6 cm = 0.016 m. ν = v ÷ λ = 340 ÷ 0.016 = 21 250 Hz. This is above 20 000 Hz, so it is ultrasound and cannot be heard by people. Forgetting to convert cm to m gives the wrong 212.5 Hz; multiplying gives 544.
Striking a drum harder makes the sound louder because:
- the amplitude of the vibration increases
- the frequency increases
- the speed of sound increases
- the wavelength becomes zero
Answer and explanation
Answer: A
Loudness depends on amplitude, which depends on the force with which the object is made to vibrate. Striking harder gives a larger amplitude and more energy, but not a different speed.
Two sound waves in the same air have frequencies 200 Hz and 400 Hz. Which statement is correct?
- The 400 Hz wave travels twice as fast
- The 400 Hz wave has twice the wavelength
- The 200 Hz wave has the shorter time period
- Both travel at the same speed and the 400 Hz wave has half the wavelength
Answer and explanation
Answer: D
In a given medium all frequencies travel at the same speed. Since v = λν is fixed, doubling ν halves λ. The 200 Hz wave has the longer period (1/200 s vs 1/400 s).
A source makes 18 000 vibrations in one minute. What is the time period of the sound?
- 300 s
- 0.033 s
- 0.0033 s
- 18 000 s
Answer and explanation
Answer: C
Frequency = 18 000 ÷ 60 s = 300 Hz. T = 1/ν = 1 ÷ 300 ≈ 0.0033 s. 300 is the frequency, not the period.
A dot is marked on a slinky carrying a longitudinal wave. The dot:
- travels along with the wave to the far end
- moves back and forth along the slinky's length about one place
- moves up and down at right angles to the slinky
- stays completely still
Answer and explanation
Answer: B
In a longitudinal wave each part of the medium oscillates about its rest position parallel to the direction of travel; it does not travel with the wave.
As a sound wave passes, the density of air at a point rises above normal and then falls below normal. The region of low density is a:
- compression
- crest
- node
- rarefaction
Answer and explanation
Answer: D
A rarefaction is a region where particles are spread apart, giving low density and low pressure. Compressions (shown as crests on the graph) are regions of high density.
Sound cannot travel through a vacuum because:
- a vacuum is too cold
- sound is a transverse wave
- there are no particles to pass on the vibrations
- sound travels only in solids
Answer and explanation
Answer: C
Sound is a mechanical wave carried by particles of a medium setting their neighbours moving. A vacuum has no particles, so the disturbance cannot be passed on.
A sitar string is plucked and the sound reaches a listener. Which sequence is correct?
- String vibrates → air particles pass on compressions and rarefactions → eardrum vibrates
- Air particles travel from the string to the ear → eardrum vibrates
- Eardrum vibrates → air vibrates → string vibrates
- String gives out light → light becomes sound in the ear
Answer and explanation
Answer: A
The vibrating string disturbs the air next to it; the air particles pass compressions and rarefactions on without travelling across the room; these make the eardrum vibrate.
The technique of forming an image of the heart using reflected ultrasound is called:
- ultrasonography of the foetus
- echocardiography
- reverberation
- stethoscopy
Answer and explanation
Answer: B
Echocardiography uses ultrasound reflected from different parts of the heart to form its image. Ultrasonography is the wider term for imaging organs, and reverberation is persistence of sound in a hall.
What is the wavelength in air (speed 340 m s⁻¹) of a 17 Hz sound?
- 5780 m
- 0.05 m
- 2 m
- 20 m
Answer and explanation
Answer: D
λ = v ÷ ν = 340 ÷ 17 = 20 m. Check: 20 × 17 = 340. 5780 comes from multiplying instead of dividing.
Why can ultrasound, but not ordinary sound, be used to detect a small crack inside a metal block?
- Ultrasound is louder
- Ultrasound travels slower in metals
- Ultrasound's short wavelength lets it travel in well-defined paths and reflect from the flaw
- Ordinary sound cannot travel through metal
Answer and explanation
Answer: C
Ordinary sound, with a longer wavelength, bends around the flaw and reaches the detector anyway. Ultrasound travels in straight, well-defined paths, so the flaw reflects it back and shows up.
In a hearing aid, which part makes the electrical signals stronger?
- Amplifier
- Microphone
- Speaker
- Battery case
Answer and explanation
Answer: A
The microphone changes sound to electrical signals, the amplifier strengthens them, and the speaker changes them back to sound.
Sound of frequency 35 kHz is:
- infrasound
- ultrasound
- audible to all adults
- a transverse wave
Answer and explanation
Answer: B
35 kHz is above 20 kHz, the upper limit of human hearing, so it is ultrasound. Infrasound is below 20 Hz.