Building a Study Timetable

Practice questions

A weekly rest day is best seen as

  1. A day that is simply wasted
  2. A planned part of the week
  3. A sign of weakness in a student
  4. An extra day for more study
Answer and explanation

Answer: B

A rest day is planned on purpose so that you return fresher. It is not a failure.

A student loses 6 hours and has a 4-hour buffer. How many hours must be handled in other ways?

  1. 4 hours
  2. 6 hours
  3. 10 hours
  4. 2 hours
Answer and explanation

Answer: D

6 - 4 = 2 hours. The buffer takes 4 and the other 2 are re-planned or dropped.

Two days of study are lost. Which rule says not to cram both into one day?

  1. Use the buffer first
  2. Do not double up
  3. Rank the missed work
  4. Plan backwards from the exam
Answer and explanation

Answer: B

Cramming two days into one overloads that day and may break its plan too. Spread the work or drop the least important parts.

A student studies 3 hours on 5 weekdays, 5 hours on Saturday and 2 hours on Sunday. Total?

  1. 20 hours
  2. 24 hours
  3. 22 hours
  4. 25 hours
Answer and explanation

Answer: C

5 x 3 = 15, then 15 + 5 + 2 = 22 hours.

In a timetable, sleep should be

  1. A fixed block, planned first
  2. The first thing to cut when busy
  3. Spare time you can borrow from
  4. Left out of the plan altogether
Answer and explanation

Answer: A

Sleep is not free time. Treating it as fixed keeps concentration steady on study days.

When the buffer is used up and work is still missing, a sensible step is to

  1. Add all of it to tomorrow's plan
  2. Ignore it and carry on as before
  3. Rank it and drop the least important
  4. Cancel every revision slot at once
Answer and explanation

Answer: C

Piling work onto one day breaks that day's plan too. Ranking and dropping keeps the plan realistic.

Why include revision slots in a timetable?

  1. Learning fades unless it is revisited
  2. Revision is only meant for the last week
  3. They replace new learning altogether
  4. They make the timetable look longer
Answer and explanation

Answer: A

Material fades without review, so revisiting it at planned times keeps what you learned.

A student has 20 study hours and plans 16. How many hours of buffer is that?

  1. 2
  2. 3
  3. 4
  4. 5
Answer and explanation

Answer: C

20 - 16 = 4 hours of buffer.

What is the main purpose of a buffer?

  1. To shorten the study time for good
  2. To absorb delays and keep the plan
  3. To allow extra leisure time each day
  4. To take the place of all revision
Answer and explanation

Answer: B

A buffer holds spare time for things that go wrong, so that one delay does not push everything back.

A student has 15 study hours. Plan four-fifths. How many hours are planned?

  1. 10
  2. 13
  3. 14
  4. 12
Answer and explanation

Answer: D

15 x 4/5 = 12 hours planned, leaving 3 hours as buffer.

If your estimates keep proving too low, you should

  1. Update the multipliers from real times
  2. Ignore the real times and carry on
  3. Stop timing the units from now on
  4. Cut parts of the syllabus at random
Answer and explanation

Answer: A

Real times are evidence. Using them to update the estimate makes the plan more accurate.

An easy unit uses the multiplier 0.75. If the base is 4 hours, how long is it?

  1. 3.75 hours
  2. 3 hours
  3. 4.75 hours
  4. 2.5 hours
Answer and explanation

Answer: B

4 x 0.75 = 3 hours.

Why time a trial unit instead of guessing?

  1. It shortens the syllabus
  2. It is required by every syllabus
  3. It removes the need for revision
  4. It gives your own real pace
Answer and explanation

Answer: D

A trial unit measures how long you actually take, which is the figure to plan with.

Total hours needed are 90; available are 6 weeks x 12 hours. What is the gap?

  1. 18 hours short
  2. 18 hours spare
  3. 12 hours short
  4. 6 hours short
Answer and explanation

Answer: A

Available = 6 x 12 = 72 hours. 90 - 72 = 18 hours short.

A trial unit takes 3 hours. A hard unit is 1.5 times as long. How long is it?

  1. 3.5 hours
  2. 4 hours
  3. 4.5 hours
  4. 5 hours
Answer and explanation

Answer: C

3 x 1.5 = 4.5 hours.

If you are behind at a milestone, the best response is

  1. Hide the delay until the next mock
  2. Add all the missed units to one day
  3. Drop the plan and start with none
  4. Rank topics and adjust the plan
Answer and explanation

Answer: D

A milestone is for noticing delays early. An honest adjustment, such as ranking topics, keeps the plan workable.

A student has 5 weeks and 20 units. How many units a week must she cover?

  1. 3
  2. 5
  3. 4
  4. 6
Answer and explanation

Answer: C

20 divided by 5 is 4 units a week.

Why plan backwards from the exam date?

  1. It sets an end point and weekly targets
  2. It lets you ignore the exam date for now
  3. It removes the need for any revision
  4. It makes every week look exactly alike
Answer and explanation

Answer: A

Starting from the exam date shows how much time you really have, so you can set targets that fit it.

There are 30 units to learn in 10 weeks. How many units a week?

  1. 2
  2. 4
  3. 5
  4. 3
Answer and explanation

Answer: D

30 divided by 10 is 3 units a week.

An exam is 84 days away. How many full weeks is that?

  1. 10
  2. 12
  3. 14
  4. 8
Answer and explanation

Answer: B

84 divided by 7 is 12 exactly.

Privacy · Terms · Refunds · Delivery