Time Management in Exams
Practice questions
Why is the middle format, the half paper, useful?
- It replaces the need for any analysis
- It practises moving between sections at half the cost of a mock
- It is the only format that allows a skip rule
- It is always easier than a sectional drill
Answer and explanation
Answer: B
The half paper adds switching between sections and checkpoint habits while costing about half a mock.
The same section takes 18 minutes in a full mock. How much slower is it per question than the drill?
- 3 seconds
- 18 seconds
- 43.2 seconds
- 7.2 seconds
Answer and explanation
Answer: D
18 x 60 / 25 = 43.2 seconds, and 43.2 - 36 = 7.2 seconds per question.
A sectional drill takes 15 minutes for 25 questions. What is the seconds per question?
- 30
- 36
- 25
- 15
Answer and explanation
Answer: B
15 x 60 = 900 seconds; 900 / 25 = 36.
Week 3 has 2 half papers of 45 minutes and 2 sectional drills of 20 minutes. What is the total?
- 110 minutes
- 150 minutes
- 130 minutes
- 85 minutes
Answer and explanation
Answer: C
2 x 45 = 90 and 2 x 20 = 40; 90 + 40 = 130.
Four sectional drills of 20 minutes are planned. How many minutes is that?
- 80
- 60
- 100
- 24
Answer and explanation
Answer: A
4 x 20 = 80 minutes.
What is the best response to a recall question when the answer has not come after about 15 seconds?
- Read it ten more times
- Work out each option with a long calculation
- Mark it and move on
- Leave the whole section
Answer and explanation
Answer: C
If recall has not worked by then, more thinking rarely helps. Mark it and return only if time is left.
At 60 seconds a question, about how many calculation questions are 204 seconds worth?
- 3.4
- 2.0
- 4.0
- 6.8
Answer and explanation
Answer: A
204 / 60 = 3.4.
Rita planned 900 seconds and used 696. How many seconds did she bank?
- 196
- 304
- 204
- 696
Answer and explanation
Answer: C
900 - 696 = 204 seconds.
Rita answers 28 questions at 12 seconds each. How many seconds is that?
- 280
- 336
- 360
- 396
Answer and explanation
Answer: B
28 x 12 = 336 seconds.
A recall section has 40 questions in 15 minutes. How many seconds is that per question?
- 15.0
- 20.0
- 25.0
- 22.5
Answer and explanation
Answer: D
15 minutes = 900 seconds; 900 / 40 = 22.5 seconds.
Why is the rate of a set affected by its set-up time?
- The set-up is paid once but earns no marks itself
- The set-up always takes exactly one minute
- The set-up is free and costs no time at all
- The set-up changes the marks of each question
Answer and explanation
Answer: A
A long set-up spreads over the questions of the set, so a set with the same questions but a longer set-up has a lower rate.
With 720 seconds left, sets A (210 s) and C (250 s) are done. How many seconds remain?
- 460
- 260
- 300
- 210
Answer and explanation
Answer: B
210 + 250 = 460 and 720 - 460 = 260 seconds.
Which questions should be done first within a data set?
- The longest calculation that is in the set
- The last question printed on the page
- Those questions with the biggest numbers in them
- The quick look-up and one-step questions
Answer and explanation
Answer: D
Cheap marks come first, and the long calculations wait until the rest of the paper has been seen.
Set X gives 4 marks in 240 seconds and set Y gives 5 marks in 450 seconds. Which has the higher rate?
- Set X, with 1 mark per minute against 0.67
- Set Y, with 1.5 marks per minute
- They are equal
- Set Y, with 1 mark per minute against 0.67
Answer and explanation
Answer: A
X: 4 / 4 = 1. Y: 5 / 7.5 = 0.67. X has the higher rate.
A group gives 3 marks for 180 seconds. What is its rate in marks per minute?
- 0.6
- 1.5
- 1
- 3
Answer and explanation
Answer: C
3 / (180 / 60) = 3 / 3 = 1 mark per minute.
Why start with a short, familiar passage?
- It is always worth more marks than the others
- The paper requires it as a fixed rule
- Long passages cannot be done by anyone at all
- It gives quick marks and shows how much time is left
Answer and explanation
Answer: D
A short familiar passage is a cheap source of marks and, once done, tells you how much time is left for the harder ones.
In which order should a passage's questions normally be answered?
- Inference ones first, and the look-up ones last
- In reverse order of the marks they carry
- Vocabulary and look-up first, then inference ones
- Only the first question, then skip all the rest
Answer and explanation
Answer: C
The quick questions give marks cheaply and help you understand the passage before the slow ones.
A 300-word passage is read at 200 words a minute. How long is the reading?
- 90 seconds
- 60 seconds
- 120 seconds
- 180 seconds
Answer and explanation
Answer: A
300 / 200 = 1.5 minutes.
A passage budget of 360 seconds has 120 seconds for reading. How many seconds are left for 5 questions, per question?
- 24
- 60
- 72
- 48
Answer and explanation
Answer: D
360 - 120 = 240 seconds; 240 / 5 = 48 seconds.
A section of 4 passages has 24 minutes. How long is each passage's share?
- 4 minutes
- 6 minutes
- 5 minutes
- 8 minutes
Answer and explanation
Answer: B
24 / 4 = 6 minutes per passage.