Unit 5 Acoustics
Practice questions
Wind blows at speed W from a source towards a listener. In the Doppler formula, the speed of sound v should be replaced by
- v − W
- v + W
- v × W
- v/W
Answer and explanation
Answer: B
When the medium moves in the direction of the sound, the sound effectively travels faster: use v + W. Against the sound, use v − W.
A car follows a truck along a straight road at the same speed, and the truck sounds its horn. The car driver hears
- a higher frequency
- a lower frequency
- no sound at all
- the actual frequency
Answer and explanation
Answer: D
The distance between them stays the same, so there is no Doppler effect. With v_L = v_S the formula (v + v_L)/(v + v_S) gives n′ = n.
A source of 550 Hz moves away from a stationary listener at one-tenth of the speed of sound. The frequency heard is
- 500 Hz
- 605 Hz
- 611 Hz
- 495 Hz
Answer and explanation
Answer: A
n′ = v/(v + v_S) × n = v/(1.1v) × 550 = 550 ÷ 1.1 = 500 Hz.
Why must a reflecting surface be at least about 17.2 m away (v = 344 m s⁻¹) to hear an echo?
- Sound cannot travel farther than 34.4 m
- Shorter distances make the sound ultrasonic
- The sound must travel 34.4 m there and back, taking at least 0.1 s
- The surface must be rigid
Answer and explanation
Answer: C
The echo must arrive at least 0.1 s later. In 0.1 s sound travels 344 × 0.1 = 34.4 m, which is the path there and back, so d = 17.2 m.
A SONAR pulse returns from the sea bed after 3 s. Sound travels at 1520 m s⁻¹ in the water. The depth is
- 4560 m
- 2280 m
- 1013 m
- 507 m
Answer and explanation
Answer: B
d = vt/2 = 1520 × 3 ÷ 2 = 4560 ÷ 2 = 2280 m.
In the echo method, the reflecting wall is 170 m away and the echo is timed at 1.0 s. The speed of sound is
- 170 m s⁻¹
- 85 m s⁻¹
- 680 m s⁻¹
- 340 m s⁻¹
Answer and explanation
Answer: D
v = 2d/t = 2 × 170 ÷ 1.0 = 340 m s⁻¹.
When sound is reflected from a convex surface, the reflected waves
- spread out and the intensity decreases
- converge to a point
- keep the same intensity
- become louder
Answer and explanation
Answer: A
A convex surface makes reflected waves diverge, so the sound energy spreads out and the intensity falls. A concave surface converges them.
A sound board in an auditorium works best when the speaker stands
- far behind the board
- at the edge of a convex board
- at the focus of a concave board
- facing the board
Answer and explanation
Answer: C
The concave board reflects sound from its focus towards the audience, so the speaker stands at the focus.
A compression travelling through a solid reaches a boundary with air. It is reflected as
- a compression
- a rarefaction
- an ultrasonic wave
- it is not reflected at all
Answer and explanation
Answer: B
At a boundary with a rarer medium, the free surface gives way and the particles spread out, so a compression returns as a rarefaction.
Sound travels faster in iron than in air because iron is
- less dense
- a gas at high temperature
- more humid
- much more elastic
Answer and explanation
Answer: D
Solids are far more elastic than gases, and elasticity raises the speed of sound. (Iron is actually much denser, which alone would slow sound.)
The pressure of a gas is doubled while its temperature is kept constant. The speed of sound in it
- does not change
- doubles
- becomes √2 times
- halves
Answer and explanation
Answer: A
At constant temperature, density rises in the same proportion as pressure, and the two effects cancel. The speed depends on temperature, not on pressure alone.
Using v_t = v₀ + 0.61t, at what temperature is the speed of sound in air 6.1 m s⁻¹ more than at 0 °C?
- 1 °C
- 61 °C
- 10 °C
- 100 °C
Answer and explanation
Answer: C
0.61t = 6.1, so t = 10 °C.
Bats navigate using sound waves of frequency
- above 20 kHz (ultrasonic)
- below 20 Hz (infrasonic)
- exactly 20 Hz
- between 20 Hz and 200 Hz
Answer and explanation
Answer: A
Bats produce and hear ultrasonic waves, above 20 kHz, which humans cannot hear.
Which statement is true of sound but not of light?
- It travels at 3 × 10⁸ m s⁻¹ in air
- It can travel through a vacuum
- It is a transverse wave
- It is a longitudinal wave that needs a medium
Answer and explanation
Answer: D
Sound is longitudinal and needs a material medium. Light is transverse, travels through vacuum and moves at 3 × 10⁸ m s⁻¹.
Sound of frequency 1.7 × 10⁴ Hz travels at 340 m s⁻¹. Its wavelength is
- 0.2 m
- 0.02 m
- 50 m
- 5.78 × 10⁶ m
Answer and explanation
Answer: B
λ = v/n = 340 ÷ 17 000 = 0.02 m (2 cm).
RADAR finds the speed of an aircraft by measuring
- the change in frequency of reflected radio waves
- the loudness of the engine
- the temperature of the air
- the echo of ultrasound in water
Answer and explanation
Answer: A
RADAR sends radio waves and detects their reflection; the frequency change (Doppler shift) gives the aircraft's speed.
A source of 660 Hz is at rest. A listener moves away from it at 33 m s⁻¹ (v = 330 m s⁻¹). The frequency heard is
- 726 Hz
- 594 Hz
- 600 Hz
- 660 Hz
Answer and explanation
Answer: B
n′ = (v − v_L)/v × n = 297/330 × 660 = 0.9 × 660 = 594 Hz.
In which situation is there NO Doppler effect?
- The source moves towards the listener
- The listener moves away from the source
- The source and listener move apart
- The source and listener move in mutually perpendicular directions
Answer and explanation
Answer: D
The textbook lists perpendicular motion among the cases with no Doppler effect, along with both at rest, distance constant, and the source at the centre of the listener's circle.
A 400 Hz source moves at 34 m s⁻¹ towards a listener at rest (v = 340 m s⁻¹). The frequency heard is about
- 360 Hz
- 440 Hz
- 444 Hz
- 400 Hz
Answer and explanation
Answer: C
n′ = v/(v − v_S) × n = 340/306 × 400 ≈ 1.111 × 400 ≈ 444 Hz. (440 Hz would be the result for a listener moving at 34 m s⁻¹ towards a source at rest.)
As a train blowing its whistle approaches a stationary listener, the pitch heard is
- higher than the actual pitch
- lower than the actual pitch
- the same as the actual pitch
- zero
Answer and explanation
Answer: A
The distance between source and listener is decreasing, so the apparent frequency is higher than the actual frequency.