Unit 8 Periodic Classification of Elements

Practice questions

Magnesium blocks are attached to an underground iron pipeline. This method of preventing corrosion is:

  1. Anodising
  2. Galvanisation by dipping
  3. Alloying
  4. Cathodic (sacrificial) protection
Answer and explanation

Answer: D

The more reactive magnesium acts as the anode and corrodes instead of the iron, which becomes the cathode. This is sacrificial or cathodic protection.

An iron nail is kept in a sealed tube of boiled water covered with a layer of oil. Why does it hardly rust?

  1. Oil reacts with the iron
  2. Oxygen cannot reach it, and rusting needs both oxygen and water
  3. Boiled water contains extra oxygen
  4. Iron cannot rust in water
Answer and explanation

Answer: B

Boiling drives out dissolved air and the oil stops more air dissolving. Without oxygen, rusting (which needs oxygen and water together) can hardly happen.

Which pair is correctly matched?

  1. Bronze: copper and zinc
  2. Duralumin: iron and nickel
  3. Brass: copper and zinc
  4. Magnalium: copper and tin
Answer and explanation

Answer: C

Brass is copper with zinc. Bronze is copper with tin, duralumin is aluminium with Mg, Mn and Cu, and magnalium is aluminium with magnesium.

Which reaction in the blast furnace is exothermic?

  1. C + O₂ → CO₂
  2. CO₂ + C → 2CO
  3. CaCO₃ → CaO + CO₂
  4. None of them
Answer and explanation

Answer: A

Burning coke in the lower zone releases heat. The reduction of CO₂ by carbon and the decomposition of limestone both absorb heat, so they are endothermic.

Bessemerisation in the extraction of copper produces:

  1. Matte
  2. Pure electrolytic copper
  3. Copper pyrites
  4. Blister copper
Answer and explanation

Answer: D

In the Bessemer converter, iron is removed as FeSiO₃ slag and 2Cu₂O + Cu₂S → 6Cu + SO₂ gives blister copper (about 98% pure), which is then refined by electrolysis.

In Baeyer's process, bauxite is first heated with:

  1. Concentrated sulphuric acid
  2. Coke
  3. Concentrated sodium hydroxide solution
  4. Molten cryolite
Answer and explanation

Answer: C

Bauxite is heated under pressure with concentrated NaOH, forming soluble sodium meta-aluminate: Al₂O₃ + 2NaOH → 2NaAlO₂ + H₂O. Cryolite is used later in Hall's process.

Which metal is obtained by electrolytic reduction of its oxide rather than by heating with coke?

  1. Zinc
  2. Aluminium
  3. Lead
  4. Iron
Answer and explanation

Answer: B

Aluminium is highly reactive and holds oxygen too strongly for carbon to remove, so alumina is electrolysed (Hall's process). Zinc, lead and iron oxides are reduced by coke.

Flux + gangue → ?

  1. Slag
  2. Matte
  3. Anode mud
  4. Alloy
Answer and explanation

Answer: A

The flux combines with the gangue to give a fusible slag, which is removed. Matte (Cu₂S + FeS) forms during copper smelting; anode mud forms in electrolytic refining.

Which concentration method suits an ore when the gangue is heavier than the ore particles?

  1. Hydraulic washing
  2. Magnetic separation
  3. Leaching
  4. Froth floatation
Answer and explanation

Answer: D

In froth floatation the lighter ore particles rise with the oily froth and the heavier gangue sinks. Hydraulic washing is for ores heavier than the gangue.

Assertion: A cation is smaller than its parent atom. Reason: The cation has more electrons than protons.

  1. Both true and the reason explains the assertion
  2. Both true but the reason does not explain it
  3. The assertion is true but the reason is false
  4. The assertion is false but the reason is true
Answer and explanation

Answer: C

A cation is indeed smaller, but because it has lost electrons: it has fewer electrons than protons, so the nucleus pulls the rest in more strongly. The reason as stated is false.

Electronegativities: Cl 3.0, H 2.1, Br 2.8. Which statement is correct?

  1. HCl is more polar than HBr
  2. HBr is ionic
  3. HCl is ionic because the difference is 0.9
  4. HBr is more polar than HCl
Answer and explanation

Answer: A

HCl difference = 3.0 − 2.1 = 0.9; HBr difference = 2.8 − 2.1 = 0.7. Both are below 1.7 and so covalent, but HCl has the larger difference and is more polar.

Which is the correct order of atomic radius?

  1. F > Cl > Br
  2. Li > Na > K
  3. Na > Mg > Al
  4. O > N > C
Answer and explanation

Answer: C

Na, Mg and Al are in period 3 from left to right; nuclear charge increases and the atoms shrink. Down group 17, F < Cl < Br, and across period 2, C > N > O.

All alkali metals have valency 1 because:

  1. They are all solids
  2. They each have one electron in the outermost shell
  3. They have one shell
  4. They have one neutron
Answer and explanation

Answer: B

Group 1 elements each have one valence electron, which they lose easily, so their valency is 1.

Which period contains the 14 lanthanides?

  1. Fourth
  2. Fifth
  3. Seventh
  4. Sixth
Answer and explanation

Answer: D

The sixth period (55-86) has 32 elements: 8 representative, 10 transition and 14 lanthanides. The seventh has the actinides.

The element with atomic number 35 is in which period and group?

  1. Period 4, group 17
  2. Period 5, group 17
  3. Period 4, group 15
  4. Period 3, group 7
Answer and explanation

Answer: A

Period 4 covers atomic numbers 19-36. Element 35 is one before krypton (36, group 18), so it is in group 17. It is bromine, a halogen.

In brass, considered as a solid solution, which metal is the solvent?

  1. Zinc
  2. Tin
  3. Copper
  4. Nickel
Answer and explanation

Answer: C

The metal present in the larger amount is the solvent. Brass is mostly copper, with zinc dissolved in it as the solute.

Galvanised iron does not rust quickly even where the zinc coat is scratched. Why?

  1. Zinc is less reactive than iron
  2. Zinc is more reactive and corrodes in preference to iron
  3. Zinc makes iron magnetic
  4. Zinc removes oxygen from the air permanently
Answer and explanation

Answer: B

Zinc is more reactive than iron, so where both are exposed the zinc is oxidised first and the iron is protected, just as in sacrificial protection.

What is the chemical name of rust?

  1. Anhydrous ferrous oxide
  2. Iron sulphide
  3. Basic copper carbonate
  4. Hydrated ferric oxide, Fe₂O₃·xH₂O
Answer and explanation

Answer: D

Rust is hydrated iron(III) oxide, Fe₂O₃·xH₂O. Basic copper carbonate is the green coat on copper.

Which alloy is non-ferrous?

  1. Bronze
  2. Stainless steel
  3. Nickel steel
  4. Cast iron
Answer and explanation

Answer: A

Bronze is copper and tin, with no iron as its main metal. Stainless steel, nickel steel and cast iron are all mainly iron.

An amalgam is an alloy that always contains:

  1. Iron
  2. Copper
  3. Mercury
  4. Aluminium
Answer and explanation

Answer: C

By definition an amalgam is an alloy of mercury with another metal, such as the silver-tin amalgam used in dental fillings.

Privacy · Terms · Refunds · Delivery