Tamil Nadu Board Class 11 Chemistry

Practice questions

1.0 g of a polymer in 250 mL of solution has an osmotic pressure of 0.0041 atm at 300 K. What is its molar mass? (R = 0.0821 L atm K⁻¹ mol⁻¹)

  1. 6.0 × 10³ g mol⁻¹
  2. 2.4 × 10⁴ g mol⁻¹
  3. 2.4 × 10⁷ g mol⁻¹
  4. 6.0 × 10⁴ g mol⁻¹
Answer and explanation

Answer: B

M = w RT ÷ (πV) = 1.0 × 0.0821 × 300 ÷ (0.0041 × 0.250) = 24.63 ÷ 0.001025 = 2.40 × 10⁴ g mol⁻¹. Using V = 250 L instead of 0.250 L would give a very different, wrong answer.

A 0.050 m aqueous KCl solution freezes at −0.175 °C (practice data). What are the van't Hoff factor and the degree of dissociation? (K_f = 1.86 K kg mol⁻¹)

  1. i = 1.88, α = 0.88
  2. i = 1.88, α = 0.94
  3. i = 0.53, α = 0.47
  4. i = 2.00, α = 1.00
Answer and explanation

Answer: A

Calculated ΔT_f = 1.86 × 0.050 = 0.093 K. i = observed ÷ calculated = 0.175 ÷ 0.093 = 1.88. KCl gives n = 2 ions, so α = (i − 1)/(n − 1) = 0.88 ÷ 1 = 0.88, about 88% dissociated.

What mass of glucose (180 g mol⁻¹) in one litre of solution is isotonic with a solution of 3.0 g L⁻¹ urea (60 g mol⁻¹)?

  1. 3.0 g
  2. 18 g
  3. 4.5 g
  4. 9.0 g
Answer and explanation

Answer: D

Isotonic non-electrolytes have equal molarity. Urea: 3.0 ÷ 60 = 0.050 mol L⁻¹. Glucose needed: 0.050 × 180 = 9.0 g L⁻¹.

0.90 g of a non-electrolyte in 50 g water raises the boiling point by 0.052 K (K_b = 0.52 K kg mol⁻¹). What is its molar mass?

  1. 90 g mol⁻¹
  2. 180 g mol⁻¹
  3. 360 g mol⁻¹
  4. 18 g mol⁻¹
Answer and explanation

Answer: B

M_B = K_b × w_B × 1000 ÷ (ΔT_b × w_A) = 0.52 × 0.90 × 1000 ÷ (0.052 × 50) = 468 ÷ 2.6 = 180 g mol⁻¹.

A car radiator contains 25% by mass ethylene glycol (62 g mol⁻¹) in water. At about what temperature will ice begin to separate? (K_f = 1.86 K kg mol⁻¹; water freezes at 273.0 K)

  1. 263.0 K
  2. 265.5 K
  3. 270.0 K
  4. 283.0 K
Answer and explanation

Answer: A

In 100 g of mixture: 25 g glycol and 75 g water. m = (25 ÷ 62) ÷ 0.075 = 0.4032 ÷ 0.075 = 5.376 m. ΔT_f = 1.86 × 5.376 = 10.0 K. Ice separates at 273.0 − 10.0 = 263.0 K.

The vapour pressure of a pure liquid A (M = 78 g mol⁻¹) is 25.0 torr. Dissolving 1.2 g of B in 39 g of A lowers it to 24.5 torr. Using the dilute-solution formula, what is the molar mass of B?

  1. 60 g mol⁻¹
  2. 240 g mol⁻¹
  3. 30 g mol⁻¹
  4. 120 g mol⁻¹
Answer and explanation

Answer: D

Δp/p° = (25.0 − 24.5) ÷ 25.0 = 0.020. M_B = w_B × M_A ÷ (w_A × 0.020) = 1.2 × 78 ÷ (39 × 0.020) = 93.6 ÷ 0.78 = 120 g mol⁻¹.

Which statement about Raoult's and Henry's laws is correct?

  1. Raoult's law applies only to gases dissolved in liquids.
  2. Henry's law constant is always equal to p° of the solvent.
  3. In both laws partial pressure is inversely proportional to mole fraction.
  4. Raoult's law is the special case of Henry's law where K_H equals p° of the component.
Answer and explanation

Answer: D

Both laws have the form p = constant × x. When the constant K_H equals the vapour pressure of the pure component, Henry's law becomes Raoult's law. Pressure is directly, not inversely, proportional to mole fraction.

Mixing acetone and chloroform gives out heat. What else is expected?

  1. Positive deviation and an increase in volume
  2. Negative deviation and a slight decrease in volume
  3. Ideal behaviour
  4. Positive deviation and no change in volume
Answer and explanation

Answer: B

Heat is released because acetone-chloroform attractions (hydrogen bonding) are stronger than those in the pure liquids. That lowers the escaping tendency (negative deviation) and draws the molecules closer (ΔV_mixing < 0).

Two liquids form an ideal solution: p°A = 90 mmHg, p°B = 30 mmHg, x_A = 0.50. What is the mole fraction of A in the VAPOUR?

  1. 0.50
  2. 0.25
  3. 0.75
  4. 0.60
Answer and explanation

Answer: C

p_A = 90 × 0.50 = 45 mmHg; p_B = 30 × 0.50 = 15 mmHg; total = 60 mmHg. Vapour mole fraction of A = 45 ÷ 60 = 0.75: the vapour is richer in the more volatile component.

A gas mixture containing 40% of gas X by volume is in contact with water at a total pressure of 2.0 atm. Taking K_H(X) = 8.0 × 10⁴ atm (practice value), what is the mole fraction of X dissolved in the water?

  1. 1.0 × 10⁻⁵
  2. 2.5 × 10⁻⁵
  3. 6.4 × 10⁴
  4. 5.0 × 10⁻⁶
Answer and explanation

Answer: A

Partial pressure of X = 0.40 × 2.0 atm = 0.80 atm. x = p ÷ K_H = 0.80 ÷ (8.0 × 10⁴) = 1.0 × 10⁻⁵. Using the total pressure (2.0 atm) instead of the partial pressure gives 2.5 × 10⁻⁵.

Why is a bottle of soda more fizzy when opened warm than when opened cold?

  1. CO₂ is more soluble in warm water.
  2. CO₂ reacts with warm water.
  3. CO₂ is less soluble in warm water, so more gas escapes.
  4. Warm water raises the pressure inside to zero.
Answer and explanation

Answer: C

The solubility of gases falls as temperature rises, so a warm drink holds less CO₂ once the pressure is released and more gas escapes as bubbles.

How many mL of 10 M NaOH are needed to prepare 400 mL of 0.25 M NaOH?

  1. 16 mL
  2. 4 mL
  3. 10 mL
  4. 40 mL
Answer and explanation

Answer: C

Vs = Cw × Vw ÷ Cs = 0.25 × 400 ÷ 10 = 100 ÷ 10 = 10 mL.

A cough syrup label says 60 mL of syrup contains 1.2 g of an active ingredient. What is its concentration in % w/v?

  1. 0.02%
  2. 20%
  3. 5%
  4. 2%
Answer and explanation

Answer: D

% w/v = (mass in g ÷ volume in mL) × 100 = (1.2 ÷ 60) × 100 = 0.02 × 100 = 2% w/v.

3.6 g glucose (180 g mol⁻¹) is dissolved in 36 g water (18 g mol⁻¹). What is the mole fraction of glucose?

  1. 0.10
  2. 0.0099
  3. 0.020
  4. 0.99
Answer and explanation

Answer: B

Glucose: 3.6 ÷ 180 = 0.020 mol. Water: 36 ÷ 18 = 2.0 mol. x = 0.020 ÷ (0.020 + 2.0) = 0.020 ÷ 2.020 = 0.0099. (0.010 would come from dividing by the water alone, the dilute-solution shortcut; 0.99 is water's mole fraction.)

A solution is made by dissolving 4.9 g of H₂SO₄ (98 g mol⁻¹) in water and making it up to 250 mL. What are its molarity and normality?

  1. 0.20 M and 0.40 N
  2. 0.40 M and 0.20 N
  3. 0.20 M and 0.20 N
  4. 0.05 M and 0.10 N
Answer and explanation

Answer: A

Moles = 4.9 ÷ 98 = 0.050; M = 0.050 ÷ 0.250 = 0.20 M. H₂SO₄ is dibasic, equivalent mass 49, gram equivalents = 4.9 ÷ 49 = 0.10; N = 0.10 ÷ 0.250 = 0.40 N.

A solute that dimerises in benzene has i = 0.60. What is its degree of association?

  1. 0.40
  2. 0.60
  3. 0.20
  4. 0.80
Answer and explanation

Answer: D

α = (1 − i)n/(n − 1) with n = 2: α = (1 − 0.60) × 2 ÷ 1 = 0.40 × 2 = 0.80. Check: 100 molecules → 80 form 40 dimers, 20 stay single, total 60 particles, i = 60/100 = 0.60.

1.0 g of NaCl in 200 g water lowers the freezing point by 0.30 K (practice data). What is the van't Hoff factor? (K_f = 1.86 K kg mol⁻¹, NaCl = 58.5 g mol⁻¹)

  1. 1.00
  2. 0.53
  3. 1.89
  4. 2.50
Answer and explanation

Answer: C

Observed molar mass = K_f × w_B × 1000 ÷ (ΔT_f × w_A) = 1.86 × 1.0 × 1000 ÷ (0.30 × 200) = 1860 ÷ 60 = 31.0 g mol⁻¹. i = actual ÷ observed = 58.5 ÷ 31.0 = 1.89.

In reverse osmosis used for desalination, what must be true?

  1. A pressure greater than the osmotic pressure is applied on the sea-water side.
  2. The membrane lets salt through but not water.
  3. Water flows from pure water into sea water.
  4. No pressure is needed.
Answer and explanation

Answer: A

Only when the applied pressure on the solution exceeds its osmotic pressure does water flow from the salt side to the pure-water side, the reverse of osmosis. The membrane still stops the salt.

Red blood cells are placed in a salt solution much more concentrated than 0.9% w/v NaCl. What happens?

  1. Water enters the cells and they burst.
  2. Nothing, because the solutions are isotonic.
  3. Salt flows into the cells until they burst.
  4. Water leaves the cells and they shrink.
Answer and explanation

Answer: D

A more concentrated (hypertonic) solution draws water out of the cells by osmosis, so they shrink. Bursting happens in a hypotonic solution.

What is the osmotic pressure of a 0.050 M solution of a non-electrolyte at 27 °C? (R = 0.0821 L atm K⁻¹ mol⁻¹)

  1. 0.11 atm
  2. 1.23 atm
  3. 12.3 atm
  4. 0.41 atm
Answer and explanation

Answer: B

T = 27 + 273 = 300 K. π = CRT = 0.050 × 0.0821 × 300 = 1.23 atm. Using 27 instead of 300 K gives 0.11 atm, a common slip.

Privacy · Terms · Refunds · Delivery