Tamil Nadu Board Class 11 Geography
Practice questions
A map at 1 : 32,000,000 has squares of 0.5 cm and is enlarged to 1 : 16,000,000. What is the side of the new squares?
- 1 cm
- 2 cm
- 0.25 cm
- 4 cm
Answer and explanation
Answer: A
New side = 0.5 × 32,000,000 ÷ 16,000,000 = 0.5 × 2 = 1 cm. Check: 0.5 cm × 320 km = 160 km; 1 cm × 160 km = 160 km.
What is the quickest check that new squares have been calculated correctly?
- The new squares must always be 2 cm
- The number of squares must double
- Each square must represent the same ground distance on both maps
- The title must change
Answer and explanation
Answer: C
A square on the new map must cover exactly the same ground as its matching square on the original.
A map is enlarged so that its scale changes from 1 : 500,000 to 1 : 250,000. Its area on paper becomes:
- 2 times
- 4 times
- half
- the same
Answer and explanation
Answer: B
The scale factor is 500,000 ÷ 250,000 = 2, so area becomes 2² = 4 times.
A map at 1 : 6,000,000 with 1 cm squares is enlarged to 1 : 2,000,000. The new squares have side:
- 2 cm
- 1/3 cm
- 6 cm
- 3 cm
Answer and explanation
Answer: D
New side = 1 × 6,000,000 ÷ 2,000,000 = 3 cm. Check: 1 cm × 60 km = 60 km; 3 cm × 20 km = 60 km.
Which is the most common method of measuring area on a map, according to the textbook?
- The square method
- The rotameter method
- The thread method
- The compass method
Answer and explanation
Answer: A
The textbook calls the square method the most common method; thread and rotameter measure lengths.
On 1 cm squares at a scale of 1 cm to 5 km, a lake covers 6 full squares and 4 half squares. Its area is:
- 40 km²
- 200 km²
- 8 km²
- 50 km²
Answer and explanation
Answer: B
Squares = 6 + 4 × ½ = 8. Each square represents 5 × 5 = 25 km². 8 × 25 = 200 km². Using 5 km² per square (40 km²) is the common error.
On a map of RF 1 : 200,000, a winding road measured with a thread is 9.5 cm. Its length is:
- 9.5 km
- 1.9 km
- 95 km
- 19 km
Answer and explanation
Answer: D
1 cm represents 200,000 cm = 2 km. 9.5 × 2 = 19 km.
In a bar scale, where is the 0 usually written?
- At the end of the first (left) primary division
- At the extreme right end
- At the extreme left end
- In the middle of the line
Answer and explanation
Answer: A
Zero is placed at the end of the first division so that the left division can carry the secondary units and the primaries are numbered to the right.
For a bar scale at RF 1 : 40,000 showing 6 km, the line should be:
- 6 cm
- 24 cm
- 15 cm
- 40 cm
Answer and explanation
Answer: C
1 cm represents 40,000 cm = 0.4 km. 6 ÷ 0.4 = 15 cm, which also matches the conventional length.
Convert RF 1 : 126,720 into a statement in the English system.
- 1 inch represents 1 mile
- 1 inch represents 2 miles
- 1 inch represents 12 miles
- 1 inch represents 20 miles
Answer and explanation
Answer: B
126,720 ÷ 63,360 = 2, so 1 inch represents 2 miles.
Convert '4 cm represents 1 km' into an RF.
- 1 : 25,000
- 1 : 40,000
- 1 : 400,000
- 1 : 4,000
Answer and explanation
Answer: A
1 km = 100,000 cm. 4 : 100,000 reduces (÷ 4) to 1 : 25,000.
Arrange from largest to smallest scale: 1 : 1,000,000; 1 : 25,000; 1 : 250,000.
- 1 : 1,000,000; 1 : 250,000; 1 : 25,000
- 1 : 250,000; 1 : 25,000; 1 : 1,000,000
- 1 : 25,000; 1 : 1,000,000; 1 : 250,000
- 1 : 25,000; 1 : 250,000; 1 : 1,000,000
Answer and explanation
Answer: D
The smaller the denominator, the larger the scale: 25,000 < 250,000 < 1,000,000.
Which statement about the representative fraction is correct?
- It has no units, so it can be read in any system
- It must always be in kilometres
- It stays correct after photocopying at a larger size
- Its numerator is the ground distance
Answer and explanation
Answer: A
The RF is a unitless ratio, with the map distance as numerator. Only the bar scale remains valid after enlargement.
Where is the north arrow conventionally placed?
- Bottom left corner
- In the legend box
- Top right corner
- Outside the frame at the bottom right
Answer and explanation
Answer: C
The textbook says the arrow pointing north is placed at the top right corner of the map.
A student's map has a title, a legend and a scale. Which two basic components named in the textbook are still missing?
- Contours and grid
- Direction and source
- Isobars and legend
- Colour and border
Answer and explanation
Answer: B
The basic components are title, legend, direction, scale and source. Direction (north arrow) and source are missing.
If a map is reduced so that all lengths are halved, the scale factor is:
- ½
- 2
- ¼
- 4
Answer and explanation
Answer: A
The scale factor is the number every length is multiplied by. Halving means a factor of ½; the area factor would be ¼.
When a map is enlarged by the square method, the number of squares in the new network is:
- doubled
- halved
- always 100
- the same as on the original
Answer and explanation
Answer: D
The textbook says the number of squares stays the same; only their size changes.
A map at 1 : 1,000,000 with 3 cm squares is reduced to 1 : 3,000,000. What is the side of the new squares?
- 1 cm
- 9 cm
- 3 cm
- 0.33 cm
Answer and explanation
Answer: A
New side = 3 × 1,000,000 ÷ 3,000,000 = 1 cm. Check: 3 cm × 10 km = 30 km; 1 cm × 30 km = 30 km.
If every length on a map is tripled, its area on paper becomes:
- 3 times larger
- 6 times larger
- 9 times larger
- the same
Answer and explanation
Answer: C
Area changes by the square of the scale factor: 3² = 9.
A map at 1 : 2,000,000 with 1 cm squares is enlarged to 1 : 1,000,000. What is the side of the new squares?
- 0.5 cm
- 2 cm
- 1 cm
- 4 cm
Answer and explanation
Answer: B
New side = 1 × 2,000,000 ÷ 1,000,000 = 2 cm. An enlargement must give larger squares.