Unit 1 Nature of Physical World and Measurement

Practice questions

Which of these can dimensional analysis do?

  1. Find the value of the constant 2π in T = 2π√(l/g)
  2. Show that F = mv²/r is consistent in dimensions
  3. Decide whether torque is a vector
  4. Derive a relation containing an exponential function
Answer and explanation

Answer: B

Dimensional analysis checks consistency: [mv²/r] = [M][L²T⁻²]/[L] = [MLT⁻²], the dimension of force. It cannot find dimensionless constants, decide vector or scalar, or handle exponential relations.

The value of G is 6.67 × 10⁻¹¹ N m² kg⁻² in SI. In c.g.s. units it is:

  1. 6.67 × 10⁻¹⁴
  2. 6.67 × 10⁻⁹
  3. 6.67 × 10⁻⁸
  4. 6.67 × 10⁻⁵
Answer and explanation

Answer: C

[G] = [M⁻¹L³T⁻²]. n₂ = 6.67 × 10⁻¹¹ × (1 kg/1 g)⁻¹ × (1 m/1 cm)³ = 6.67 × 10⁻¹¹ × 10⁻³ × 10⁶ = 6.67 × 10⁻⁸ dyne cm² g⁻².

The velocity of a particle is v = at + b/(t + c), where t is time. The dimensions of b are:

  1. [LT⁻²]
  2. [L]
  3. [LT⁻¹]
  4. [T]
Answer and explanation

Answer: B

c is added to t, so [c] = [T]. Then b/(t + c) must have the dimensions of velocity: [b] = [LT⁻¹][T] = [L].

Which number has the greatest number of significant figures?

  1. 0.000420
  2. 4.20 × 10⁵
  3. 4200
  4. 42.010
Answer and explanation

Answer: D

0.000420 has 3; 4.20 × 10⁵ has 3; 4200 has 2 (no decimal point, trailing zeros not significant); 42.010 has 5.

The radius of a circle is 2.15 cm. Its area πr², with the correct number of significant figures, is:

  1. 14.5 cm²
  2. 14.52 cm²
  3. 14.522 cm²
  4. 15 cm²
Answer and explanation

Answer: A

πr² = 3.14159 × 4.6225 = 14.522 cm². The radius has three significant figures (π is treated as exact), so the area is given to three: 14.5 cm².

If Q = a³b²/√c and the percentage errors in a, b and c are 1%, 2% and 2%, the percentage error in Q is:

  1. 5%
  2. 9%
  3. 8%
  4. 7%
Answer and explanation

Answer: C

ΔQ/Q = 3(1%) + 2(2%) + ½(2%) = 3% + 4% + 1% = 8%.

A wire has V = (10.0 ± 0.2) V across it and I = (2.0 ± 0.1) A through it. Its resistance R = V/I is:

  1. (5.0 ± 0.35) Ω
  2. (5.0 ± 0.3) Ω
  3. (5.0 ± 0.1) Ω
  4. (5.0 ± 0.05) Ω
Answer and explanation

Answer: A

R = 10.0/2.0 = 5.0 Ω. Fractional error = 0.2/10.0 + 0.1/2.0 = 0.02 + 0.05 = 0.07. ΔR = 0.07 × 5.0 = 0.35 Ω.

Readings of a length are 5.2 cm, 5.4 cm, 5.3 cm and 5.3 cm. The percentage error (using the mean absolute error) is about:

  1. 0.5%
  2. 1.0%
  3. 0.9%
  4. 2.0%
Answer and explanation

Answer: C

Mean = 21.2/4 = 5.3 cm. Absolute errors: 0.1, 0.1, 0.0, 0.0; mean absolute error = 0.2/4 = 0.05 cm. Percentage error = 0.05/5.3 × 100% ≈ 0.94%, about 0.9%.

Assertion (A): Averaging many readings removes the error caused by a wrongly calibrated instrument. Reason (R): Random errors scatter readings on both sides of the true value.

  1. Both A and R are true, and R explains A.
  2. Both A and R are true, but R does not explain A.
  3. A is true, but R is false.
  4. A is false, but R is true.
Answer and explanation

Answer: D

A wrongly calibrated instrument causes a systematic error that shifts every reading the same way, so averaging does not remove it: A is false. R is a true statement about random errors, which averaging does reduce.

A SONAR pulse returns from the sea bed 2.0 s after it is sent. If sound travels at 1500 m s⁻¹ in sea water, the depth is:

  1. 3000 m
  2. 750 m
  3. 6000 m
  4. 1500 m
Answer and explanation

Answer: D

The pulse travels down and back, so d = vt/2 = 1500 × 2.0 / 2 = 1500 m.

An object at a distance of 3.0 × 10⁸ m subtends an angle of 0.010 rad. Its diameter is:

  1. 3.0 × 10⁶ m
  2. 3.0 × 10¹⁰ m
  3. 3.0 × 10⁸ m
  4. 3.0 × 10⁴ m
Answer and explanation

Answer: A

For small angles the diameter is approximately an arc: D = xθ = 3.0 × 10⁸ × 0.010 = 3.0 × 10⁶ m.

A screw gauge has LC 0.01 mm and a zero error of −0.02 mm. With PSR = 2 mm and HSC = 45, the corrected reading is:

  1. 2.43 mm
  2. 2.45 mm
  3. 2.47 mm
  4. 2.25 mm
Answer and explanation

Answer: C

Observed = 2 + 45 × 0.01 = 2.45 mm. Corrected = observed − zero error = 2.45 − (−0.02) = 2.47 mm.

A patch of area 0.36 m² on the surface of a sphere of radius 0.60 m subtends at the centre a solid angle of:

  1. 0.60 sr
  2. 1.0 sr
  3. 0.36 sr
  4. 2.0 sr
Answer and explanation

Answer: B

Ω = area/radius² = 0.36 m² / (0.60 m)² = 0.36/0.36 = 1.0 sr.

Which unit is NOT an SI base unit?

  1. candela
  2. mole
  3. newton
  4. kelvin
Answer and explanation

Answer: C

The newton is a derived unit (1 N = 1 kg m s⁻²). Candela, mole and kelvin are among the seven base units.

Explaining the temperature and pressure of a gas through the motion of its molecules is an example of:

  1. unification
  2. reductionism
  3. falsification
  4. triangulation
Answer and explanation

Answer: B

Reductionism explains a macroscopic system (a bulk gas) through its microscopic parts (molecules), as kinetic theory does.

A force of 1 N expressed in dyne (the c.g.s. unit) is:

  1. 10⁵ dyne
  2. 10³ dyne
  3. 10⁷ dyne
  4. 10² dyne
Answer and explanation

Answer: A

Force is [MLT⁻²]: n₂ = 1 × (1 kg/1 g)¹ × (1 m/1 cm)¹ × (1 s/1 s)⁻² = 10³ × 10² = 10⁵. So 1 N = 10⁵ dyne.

Refractive index is an example of a:

  1. dimensional constant
  2. dimensional variable
  3. dimensionless constant
  4. dimensionless variable
Answer and explanation

Answer: D

Refractive index is a ratio of two speeds, so it has no dimensions, and its value varies from one medium to another. It is a dimensionless variable.

In the relation x = A sin(ωt), where x is a displacement and t is time, the dimensions of ω are:

  1. [T]
  2. [T⁻¹]
  3. [LT⁻¹]
  4. [M⁰L⁰T⁰]
Answer and explanation

Answer: B

The argument ωt of a sine must be dimensionless, so [ω] = 1/[T] = [T⁻¹].

Which pair of quantities has the same dimensions?

  1. Torque and work
  2. Force and power
  3. Momentum and energy
  4. Pressure and force
Answer and explanation

Answer: A

Torque = force × distance and work = force × distance, both [ML²T⁻²]. The others differ: force [MLT⁻²] vs power [ML²T⁻³]; momentum [MLT⁻¹] vs energy [ML²T⁻²]; pressure [ML⁻¹T⁻²] vs force [MLT⁻²].

The dimensional formula of power is:

  1. [ML²T⁻²]
  2. [MLT⁻²]
  3. [ML²T⁻³]
  4. [ML²T⁻¹]
Answer and explanation

Answer: C

Power = work/time = [ML²T⁻²]/[T] = [ML²T⁻³].

Privacy · Terms · Refunds · Delivery