Unit 5 Motion of System of Particles and Rigid Bodies

Practice questions

A uniform solid cylinder starts from rest and rolls without slipping down a slope through a vertical height of 3 m (g = 10 m s⁻²). Its speed at the bottom is about:

  1. 7.7 m s⁻¹
  2. 6.3 m s⁻¹
  3. 5.5 m s⁻¹
  4. 4.5 m s⁻¹
Answer and explanation

Answer: B

For a solid cylinder K²/R² = ½. v = √[2gh/(1 + ½)] = √(60/1.5) = √40 ≈ 6.3 m s⁻¹. 7.7 m s⁻¹ = √(2gh) would be for sliding without friction.

For a solid sphere rolling without slipping, the fraction of its total kinetic energy that is rotational is:

  1. 2/5
  2. 5/7
  3. 1/2
  4. 2/7
Answer and explanation

Answer: D

KE_TRANS : KE_ROT = 1 : K²/R² = 1 : 2/5 = 5 : 2. Rotational fraction = 2/(5 + 2) = 2/7.

A child of mass 40 kg stands at the rim (radius 2 m) of a playground roundabout of moment of inertia 200 kg m² turning freely at 2 rad s⁻¹. Treating the child as a point mass, the angular velocity when the child walks to the centre is:

  1. 2.0 rad s⁻¹
  2. 1.1 rad s⁻¹
  3. 3.6 rad s⁻¹
  4. 5.6 rad s⁻¹
Answer and explanation

Answer: C

No external torque, so Iω is conserved. Iᵢ = 200 + 40 × 2² = 360 kg m²; I_f = 200 kg m². ω_f = 360 × 2/200 = 3.6 rad s⁻¹.

The radius of gyration of a uniform rod of length ℓ about a perpendicular axis through one end is:

  1. ℓ/√12
  2. ℓ/√3
  3. ℓ/2
  4. ℓ/3
Answer and explanation

Answer: B

I = Mℓ²/3 = MK², so K = ℓ/√3 ≈ 0.577ℓ. ℓ/√12 is the value about the centre.

The moment of inertia of a uniform rod of mass M and length ℓ about a perpendicular axis through a point ℓ/4 from its centre is:

  1. 7Mℓ²/48
  2. Mℓ²/16
  3. Mℓ²/3
  4. 5Mℓ²/48
Answer and explanation

Answer: A

Parallel axis theorem: I = Mℓ²/12 + M(ℓ/4)² = 4Mℓ²/48 + 3Mℓ²/48 = 7Mℓ²/48.

A uniform disc of mass 2 kg and radius 0.1 m. Its moment of inertia about a tangent lying in its own plane is:

  1. 0.010 kg m²
  2. 0.030 kg m²
  3. 0.025 kg m²
  4. 0.015 kg m²
Answer and explanation

Answer: C

About a diameter I = MR²/4 (perpendicular axis theorem). The tangent in the plane is parallel to a diameter at distance R: I = MR²/4 + MR² = 5MR²/4 = 1.25 × 2 × 0.01 = 0.025 kg m².

A wheel rolls along a straight level road at constant speed and without slipping, with the net force and net torque on it zero. Its state is best described as:

  1. dynamic equilibrium
  2. static equilibrium
  3. unstable equilibrium
  4. not in equilibrium
Answer and explanation

Answer: A

Its linear and angular momenta are constant but not zero, while the net force and net torque are zero: this is dynamic equilibrium. Static equilibrium needs both momenta to be zero.

A cyclist leans at 30° to the vertical while riding at 5 m s⁻¹ on a level curve (g = 10 m s⁻²). The radius of the curve is about:

  1. 1.44 m
  2. 2.5 m
  3. 8.66 m
  4. 4.33 m
Answer and explanation

Answer: D

tan θ = v²/rg, so r = v²/(g tan 30°) = 25/(10 × 0.577) ≈ 4.33 m.

A uniform 6 m beam of mass 20 kg rests on supports at its two ends. A 30 kg person stands 2 m from the left end (g = 10 m s⁻²). The force from the left support is:

  1. 250 N
  2. 200 N
  3. 300 N
  4. 500 N
Answer and explanation

Answer: C

Take torques about the right end: R_L × 6 = (200 N)(3 m) + (300 N)(4 m) = 600 + 1200 = 1800, so R_L = 300 N. Then R_R = 500 − 300 = 200 N.

The angular momentum of a flywheel rises steadily from 4 kg m² s⁻¹ to 10 kg m² s⁻¹ in 2 s. The torque acting on it is:

  1. 6 N m
  2. 3 N m
  3. 7 N m
  4. 12 N m
Answer and explanation

Answer: B

τ = dL/dt = ΔL/Δt = (10 − 4)/2 = 3 N m.

Assertion (A): A particle moving with constant velocity along a straight line has constant angular momentum about any fixed point not on that line. Reason (R): Its angular momentum about the point is m v d, where d is the perpendicular distance of the line from the point.

  1. Both A and R are true, and R is the correct explanation of A.
  2. Both A and R are true, but R is not the correct explanation of A.
  3. A is true, but R is false.
  4. A is false, but R is true.
Answer and explanation

Answer: A

L = rp sin θ = p(r sin θ) = m v d. As the particle moves, r and θ change but r sin θ = d stays fixed, so L is constant. R explains A.

A force F⃗ = (4î − ĵ) N acts at the point r⃗ = (2î + 3ĵ) m. The torque about the origin is:

  1. (14 k̂) N m
  2. (10 k̂) N m
  3. (−10 k̂) N m
  4. (−14 k̂) N m
Answer and explanation

Answer: D

τ⃗ = r⃗ × F⃗; for vectors in the x-y plane, τ_z = xF_y − yF_x = (2)(−1) − (3)(4) = −2 − 12 = −14. So τ⃗ = −14 k̂ N m (into the page: clockwise).

A shell at the top of its flight bursts by itself into two equal halves. One half drops vertically from rest and lands at R/2, where R is the range the shell would have had. Both halves land at the same time. The other half lands at:

  1. R
  2. 2R
  3. 3R/2
  4. 5R/4
Answer and explanation

Answer: C

Internal forces leave the CM's path unchanged, so the CM lands at R. With equal masses the CM is midway: (R/2 + x)/2 = R gives x = 3R/2.

A circular hole of radius R/3, centred 2R/3 from the centre O, is cut from a uniform disc of radius R. The centre of mass of the remaining part is:

  1. R/12 from O, on the side away from the hole
  2. R/12 from O, on the side of the hole
  3. R/6 from O, on the side away from the hole
  4. at O
Answer and explanation

Answer: A

Removed mass = M(1/3)² = M/9; remaining = 8M/9. About O: (8M/9)x + (M/9)(2R/3) = 0, so x = −R/12, i.e. R/12 on the far side from the hole.

Masses of 1 kg, 2 kg and 3 kg are placed at (0, 0), (2 m, 0) and (0, 3 m) respectively. The centre of mass is at:

  1. (1.0 m, 1.0 m)
  2. (0.67 m, 1.5 m)
  3. (1.5 m, 0.67 m)
  4. (0.67 m, 1.0 m)
Answer and explanation

Answer: B

M = 6 kg. x_CM = (1 × 0 + 2 × 2 + 3 × 0)/6 = 4/6 ≈ 0.67 m. y_CM = (1 × 0 + 2 × 0 + 3 × 3)/6 = 9/6 = 1.5 m.

A rolling wheel of radius 1.5 m has v_CM = 5 m s⁻¹ and angular velocity 3 rad s⁻¹. Its motion is:

  1. pure rolling
  2. slipping
  3. sliding
  4. pure rotation about the centre
Answer and explanation

Answer: C

Rω = 1.5 × 3 = 4.5 m s⁻¹, which is less than v_CM = 5 m s⁻¹. Translation exceeds rotation (v_CM > Rω), so the wheel is sliding.

A ring, a disc, a hollow sphere and a solid sphere of the same radius are released together from the top of the same incline and roll without slipping. The first to reach the bottom is the:

  1. solid sphere
  2. disc
  3. hollow sphere
  4. ring
Answer and explanation

Answer: A

a = g sin θ/(1 + K²/R²). The solid sphere has the smallest K²/R² (2/5), so it has the largest acceleration and arrives first; the ring (K²/R² = 1) is last.

A uniform disc of mass 2 kg rolls without slipping with its centre moving at 2 m s⁻¹. Its total kinetic energy is:

  1. 4 J
  2. 2 J
  3. 8 J
  4. 6 J
Answer and explanation

Answer: D

KE = ½Mv²(1 + K²/R²) = ½ × 2 × 4 × (1 + ½) = 4 × 1.5 = 6 J (4 J translational + 2 J rotational).

A wheel rolls without slipping with its centre moving at v. The speed of the topmost point of the wheel is:

  1. v
  2. 2v
  3. zero
  4. √2 v
Answer and explanation

Answer: B

At the top, the translational velocity v and the rotational velocity Rω = v point the same way, so they add to 2v. The contact point, where they cancel, is at rest.

A body rotating freely with no external torque has its moment of inertia halved. Its angular velocity:

  1. is halved
  2. stays the same
  3. doubles
  4. becomes four times
Answer and explanation

Answer: C

Iᵢωᵢ = I_fω_f. With I_f = Iᵢ/2, ω_f = 2ωᵢ: the angular velocity doubles.

Privacy · Terms · Refunds · Delivery