Unit 7 Properties of Matter

Practice questions

Bernoulli's theorem in the form P/ρ + ½v² + gh = constant holds strictly for:

  1. any fluid in any kind of flow
  2. viscous liquids in turbulent flow
  3. incompressible, non-viscous liquids in streamlined flow
  4. gases only
Answer and explanation

Answer: C

The proof assumes no energy is lost to friction (non-viscous), a constant density (incompressible) and steady, streamlined flow along which energy is followed. Real fluids lose some energy as heat, so it is then only approximate.

Wind at 20 m s⁻¹ blows over a roof of area 40 m², with still air below (air density 1.2 kg m⁻³). The upward force on the roof is about:

  1. 240 N
  2. 960 N
  3. 4800 N
  4. 9600 N
Answer and explanation

Answer: D

ΔP = ½ρv² = ½ × 1.2 × 20² = 0.6 × 400 = 240 Pa. Force = ΔP × area = 240 × 40 = 9600 N.

Water flows at 0.40 m s⁻¹ in a pipe of diameter 6.0 cm, which narrows to 2.0 cm. The speed in the narrow part is:

  1. 3.6 m s⁻¹
  2. 1.2 m s⁻¹
  3. 0.13 m s⁻¹
  4. 0.044 m s⁻¹
Answer and explanation

Answer: A

a₁v₁ = a₂v₂ with area ∝ diameter². v₂ = v₁ × (6.0/2.0)² = 0.40 × 9 = 3.6 m s⁻¹.

How much work is needed to blow a soap bubble of radius 2.0 cm if the surface tension of the soap solution is 0.025 N m⁻¹?

  1. 1.26 × 10⁻⁴ J
  2. 2.51 × 10⁻⁴ J
  3. 5.03 × 10⁻⁴ J
  4. 1.0 × 10⁻⁵ J
Answer and explanation

Answer: B

A soap bubble has two surfaces: ΔA = 2 × 4πr² = 8π × (0.020)² = 8π × 4.0 × 10⁻⁴ = 1.005 × 10⁻² m². W = TΔA = 0.025 × 1.005 × 10⁻² = 2.51 × 10⁻⁴ J. (Counting only one surface gives the wrong answer 1.26 × 10⁻⁴ J.)

Water (T = 0.070 N m⁻¹, angle of contact 0°) rises in a glass capillary of radius 0.10 mm. The height of rise is about:

  1. 1.4 cm
  2. 7.1 cm
  3. 28.6 cm
  4. 14.3 cm
Answer and explanation

Answer: D

h = 2T cos θ/(rρg) = 2 × 0.070 × 1/(1.0 × 10⁻⁴ × 1000 × 9.8) = 0.14/0.98 = 0.143 m ≈ 14.3 cm.

Two soap bubbles have radii 1.0 cm and 2.0 cm. The ratio of the excess pressure inside the smaller one to that inside the larger one is:

  1. 1 : 2
  2. 1 : 4
  3. 2 : 1
  4. 4 : 1
Answer and explanation

Answer: C

ΔP = 4T/R, so ΔP ∝ 1/R. The smaller bubble has half the radius and therefore twice the excess pressure: 2 : 1.

Water (η = 1.0 × 10⁻³ Pa s) flows at 0.50 m s⁻¹ in a pipe of diameter 1.0 cm. Its Reynolds' number and type of flow are:

  1. 5000, turbulent
  2. 500, streamlined
  3. 50, streamlined
  4. 1500, unsteady
Answer and explanation

Answer: A

R_c = ρvD/η = 1000 × 0.50 × 0.010/1.0 × 10⁻³ = 5.0/1.0 × 10⁻³ = 5000. This is above 2000, so the flow is turbulent.

A small cork ball is released at the bottom of a tall jar of glycerine. It will:

  1. stay at the bottom
  2. rise, soon reaching a steady (terminal) speed upward
  3. rise with ever-increasing speed
  4. sink further, as the upthrust is zero
Answer and explanation

Answer: B

Cork is less dense than glycerine, so σ > ρ and the net force is upward. As it rises, viscous drag grows until it balances the net upward force; v_t = 2r²(ρ − σ)g/9η is then negative, meaning a steady upward speed.

A plate of area 0.050 m² is moved at 0.40 m s⁻¹ over a 1.0 mm layer of liquid on a fixed surface, needing a force of 0.60 N. The coefficient of viscosity is:

  1. 0.30 N s m⁻²
  2. 3.0 N s m⁻²
  3. 0.0030 N s m⁻²
  4. 0.030 N s m⁻²
Answer and explanation

Answer: D

η = F dx/(A dv) = 0.60 × 1.0 × 10⁻³/(0.050 × 0.40) = 6.0 × 10⁻⁴/0.020 = 0.030 N s m⁻².

A floating cube of side 10 cm has a 200 g mass placed on its top face. How much further does it sink into the water?

  1. 2.0 cm
  2. 0.20 cm
  3. 20 cm
  4. 1.0 cm
Answer and explanation

Answer: A

The extra upthrust must equal the extra weight: ρ_water × A × Δh = m. Δh = 0.200/(1000 × 0.10 × 0.10) = 0.200/10 = 0.020 m = 2.0 cm.

A block of wood of density 800 kg m⁻³ floats in water. The fraction of its volume above the water surface is:

  1. 80%
  2. 8%
  3. 20%
  4. 25%
Answer and explanation

Answer: C

Fraction submerged = ρ_body/ρ_water = 800/1000 = 0.80, so the fraction above the surface is 1 − 0.80 = 0.20, or 20%.

Taking 1 atm = 1.013 × 10⁵ Pa, at what depth in fresh water is the total pressure 3 atm?

  1. 10.3 m
  2. 20.7 m
  3. 31.0 m
  4. 30.0 m
Answer and explanation

Answer: B

P = Pₐ + ρgh, so ρgh = 2 atm = 2.026 × 10⁵ Pa. h = 2.026 × 10⁵/(1000 × 9.8) = 20.7 m.

A steel wire (Y = 2.0 × 10¹¹ N m⁻²) is under a strain of 1.0 × 10⁻³. The elastic energy stored per unit volume is:

  1. 2.0 × 10⁸ J m⁻³
  2. 2.0 × 10⁵ J m⁻³
  3. 1.0 × 10⁸ J m⁻³
  4. 1.0 × 10⁵ J m⁻³
Answer and explanation

Answer: D

u = ½ × stress × strain = ½ Y (strain)² = ½ × 2.0 × 10¹¹ × (1.0 × 10⁻³)² = ½ × 2.0 × 10⁵ = 1.0 × 10⁵ J m⁻³.

A pressure of 2.0 × 10⁶ Pa reduces the volume of a solid by 0.010%. Its bulk modulus is:

  1. 2.0 × 10¹⁰ Pa
  2. 2.0 × 10⁸ Pa
  3. 2.0 × 10¹² Pa
  4. 2.0 × 10⁴ Pa
Answer and explanation

Answer: A

Volume strain = 0.010% = 1.0 × 10⁻⁴. K = P/(|ΔV|/V) = 2.0 × 10⁶/1.0 × 10⁻⁴ = 2.0 × 10¹⁰ Pa.

Two wires of the same material carry the same load. Wire B is twice as long as wire A and has twice its diameter. The ratio of the extension of B to that of A is:

  1. 2 : 1
  2. 1 : 4
  3. 1 : 2
  4. 4 : 1
Answer and explanation

Answer: C

ΔL = FL/(AY) with A ∝ D². For B: L doubles (×2) and A becomes 4 times (×1/4), so ΔL_B/ΔL_A = 2/4 = 1/2.

A venturimeter is used to measure:

  1. the rate of flow of a liquid in a pipe
  2. the viscosity of a liquid
  3. the surface tension of a liquid
  4. atmospheric pressure
Answer and explanation

Answer: A

A venturimeter measures the pressure difference between a wide part and a narrow throat; continuity and Bernoulli's theorem then give the speed and volume flow rate of the liquid.

An aeroplane wing gets an upward lift mainly because:

  1. air is heavier below the wing
  2. the wing pushes air downward by friction
  3. air moves more slowly over the top surface
  4. air moves faster over the top surface, so the pressure there is lower
Answer and explanation

Answer: D

The wing's shape makes the air flow faster over its curved upper surface. By Bernoulli's theorem the pressure above is then lower than below, giving the dynamic lift.

Water (ρ = 1000 kg m⁻³) flows in a horizontal pipe at 1.0 m s⁻¹ in a wide part and 3.0 m s⁻¹ in a narrow part. The pressure difference between them is:

  1. 1000 Pa
  2. 2000 Pa
  3. 4000 Pa
  4. 9000 Pa
Answer and explanation

Answer: C

P₁ − P₂ = ½ρ(v₂² − v₁²) = ½ × 1000 × (9.0 − 1.0) = 500 × 8.0 = 4000 Pa.

For a liquid flowing steadily in a horizontal pipe of varying width, the pressure is:

  1. lowest where the speed is greatest
  2. highest where the speed is greatest
  3. the same everywhere
  4. highest where the pipe is narrowest
Answer and explanation

Answer: A

For a horizontal pipe Bernoulli's theorem gives P + ½ρv² = constant. Where v is greatest (the narrowest part), P is lowest.

Water flows steadily through a pipe. Where the cross-sectional area is halved, the speed of the water:

  1. halves
  2. doubles
  3. becomes four times
  4. stays the same
Answer and explanation

Answer: B

By continuity a₁v₁ = a₂v₂. If a₂ = a₁/2, then v₂ = 2v₁: the speed doubles.

Privacy · Terms · Refunds · Delivery