Unit 10 Electronics and Communication

Practice questions

The region where neither the ground wave nor the sky wave is received is called the:

  1. Skip distance
  2. Ionosphere
  3. Line of sight
  4. Skip zone
Answer and explanation

Answer: D

Beyond the range of the ground wave and before the point where the sky wave first returns (the skip distance), there is no reception: this region is the skip zone.

Transmitting and receiving antennas are 72 m and 50 m high; R = 6400 km. The maximum line-of-sight distance between them is about:

  1. 30 km
  2. 56 km
  3. 25 km
  4. 112 km
Answer and explanation

Answer: B

d_T = √(2 × 6.4 × 10⁶ × 72) = √(9.216 × 10⁸) = 30.4 km; d_R = √(2 × 6.4 × 10⁶ × 50) = √(6.4 × 10⁸) = 25.3 km. d = 30.4 + 25.3 = 55.7 km, about 56 km.

Which statement about FM compared with AM is correct, as given in the Tamil Nadu textbook?

  1. FM has much less noise but needs a wider channel
  2. FM needs a narrower channel than AM
  3. FM covers a larger area than AM
  4. FM equipment is simpler and cheaper
Answer and explanation

Answer: A

FM greatly reduces noise and gives better sound, but it needs a much wider channel, more complex and costly equipment, and its reception covers a smaller area.

The output of an Ex-OR gate with inputs A = 1 and B = 1 is fed, together with C = 1, into an AND gate. The final output is:

  1. 1
  2. Undefined
  3. It depends on positive or negative logic only
  4. 0
Answer and explanation

Answer: D

Ex-OR gives 1 only when its inputs differ; with A = B = 1 its output is 0. Then AND(0, 1) = 0.

A NOR gate is equivalent to:

  1. An OR gate with inverted inputs
  2. A NAND gate
  3. An AND gate with inverted inputs
  4. An Ex-OR gate
Answer and explanation

Answer: C

De Morgan's first theorem: NOT(A + B) = A̅·B̅, which is an AND gate whose inputs are inverted (a bubbled AND).

An LC oscillator has L = 100 μH and C = 1.0 nF. Its frequency is about:

  1. 5.0 kHz
  2. 503 kHz
  3. 1.6 MHz
  4. 50 kHz
Answer and explanation

Answer: B

f = 1/(2π√(LC)) = 1/(2π√(1.0 × 10⁻⁴ × 1.0 × 10⁻⁹)) = 1/(2π × 3.16 × 10⁻⁷) = 1/(1.99 × 10⁻⁶) = 5.03 × 10⁵ Hz ≈ 503 kHz.

In a CE circuit with V_CC = 9.0 V, R_C = 1.5 kΩ and β = 150, the base current is 20 μA. V_CE is:

  1. 4.5 V
  2. 3.0 V
  3. 6.0 V
  4. 7.5 V
Answer and explanation

Answer: A

I_C = βI_B = 150 × 20 μA = 3.0 mA. V_CE = V_CC − I_C R_C = 9.0 − (3.0 × 10⁻³ × 1500) = 9.0 − 4.5 = 4.5 V.

A transistor used as a closed (ON) switch is operated in the:

  1. Active region
  2. Cut-off region
  3. Breakdown region
  4. Saturation region
Answer and explanation

Answer: D

In saturation both junctions are forward biased and the collector current is at its maximum, so the transistor acts as a closed switch. Cut-off is the open switch; the active region is for amplification.

For a transistor, I_B = 40 μA and I_C = 4.0 mA. Its α is about:

  1. 100
  2. 0.01
  3. 0.99
  4. 1.01
Answer and explanation

Answer: C

β = I_C/I_B = 4.0 mA/0.040 mA = 100. α = β/(1 + β) = 100/101 = 0.99. (Equivalently I_E = 4.04 mA and α = 4.0/4.04 = 0.99.)

The rectifier that uses both half cycles with only two diodes needs:

  1. A centre-tapped transformer
  2. No transformer at all
  3. A Zener diode
  4. An LC tank circuit
Answer and explanation

Answer: A

The full-wave rectifier in the Tamil Nadu textbook uses a centre-tapped transformer: each diode conducts in one half cycle, and the centre tap is the zero reference.

In a Zener regulator, the input voltage rises while the load stays the same. What happens?

  1. The output voltage rises by the same amount
  2. The Zener current falls
  3. The extra voltage appears across the series resistor and the Zener current rises
  4. The diode stops conducting
Answer and explanation

Answer: C

The Zener holds V_Z across itself and the parallel load. The rise in input appears across R_s, so I_s rises; since I_L = V_Z/R_L is unchanged, the extra current flows through the Zener (I_Z = I_s − I_L rises).

A silicon diode (0.7 V drop) and a 470 Ω resistor are in series across a 5.4 V supply, with the diode forward biased. The current is:

  1. 11.5 mA
  2. 10.0 mA
  3. 1.0 mA
  4. 4.7 mA
Answer and explanation

Answer: B

Voltage across the resistor = 5.4 − 0.7 = 4.7 V. I = 4.7/470 = 0.010 A = 10.0 mA. (11.5 mA would ignore the diode drop.)

An LED made of a material with E_g = 1.9 eV emits light of wavelength about:

  1. 653 nm
  2. 1.9 nm
  3. 236 nm
  4. 1130 nm
Answer and explanation

Answer: A

λ ≈ 1240/E_g = 1240/1.9 = 653 nm, which is red light.

In p-type silicon the minority carriers are:

  1. Holes
  2. Positive ions
  3. Acceptor atoms
  4. Electrons
Answer and explanation

Answer: D

Trivalent acceptors provide holes, so holes are the majority carriers; the few thermally generated electrons are the minority carriers. Ions are fixed and do not carry current.

At room temperature, which change increases the conductivity of pure silicon the most for practical devices?

  1. Cooling it towards 0 K
  2. Doping it with a small amount of phosphorus
  3. Making the crystal larger
  4. Removing all impurities
Answer and explanation

Answer: B

A pentavalent dopant such as phosphorus gives nearly one free electron per atom, because only about 0.05 eV frees a donor electron, while freeing an intrinsic electron needs 1.1 eV. Cooling reduces conduction; purifying leaves only the few intrinsic carriers.

A radar echo returns after 0.40 ms. The target is at a distance of:

  1. 60 km
  2. 120 km
  3. 30 km
  4. 12 km
Answer and explanation

Answer: A

d = ct/2 = (3.0 × 10⁸ × 0.40 × 10⁻³)/2 = (1.2 × 10⁵)/2 = 6.0 × 10⁴ m = 60 km.

Which block of a transmitter superimposes the baseband signal on the carrier?

  1. Oscillator
  2. Transducer
  3. Power amplifier
  4. Modulator
Answer and explanation

Answer: D

The oscillator makes the carrier, the modulator superimposes the baseband signal on it, and the power amplifier then raises the power for transmission.

A TV tower is 80 m high and R = 6400 km. The radius of the area it covers by line of sight is about:

  1. 16 km
  2. 64 km
  3. 32 km
  4. 3.2 km
Answer and explanation

Answer: C

d = √(2Rh) = √(2 × 6.4 × 10⁶ × 80) = √(1.024 × 10⁹) = 3.2 × 10⁴ m = 32 km.

Sky waves are reflected back to the Earth by the:

  1. Ionosphere
  2. Troposphere
  3. Ozone layer only
  4. Earth's magnetic field
Answer and explanation

Answer: A

The ionosphere (about 50 km to 400 km up) contains ions that bend suitable radio waves (about 3-30 MHz) back to Earth.

In frequency modulation, the quantity of the carrier that changes with the baseband signal is its:

  1. Amplitude
  2. Frequency
  3. Phase only
  4. Speed
Answer and explanation

Answer: B

In FM the carrier's frequency varies in proportion to the instantaneous amplitude of the baseband signal, while its amplitude and phase stay constant.

Privacy · Terms · Refunds · Delivery