Unit 5 Electromagnetic waves

Practice questions

Comparing the Fraunhofer lines with absorption spectra measured in the laboratory allows scientists to:

  1. measure the distance to the Sun
  2. identify the elements in the Sun's atmosphere
  3. find the age of the Sun
  4. show that sunlight is longitudinal
Answer and explanation

Answer: B

Each element absorbs its own characteristic wavelengths. Matching the dark lines in sunlight with laboratory absorption lines reveals which elements are present in the Sun's outer atmosphere.

In a microwave oven of frequency 2450 MHz, scorched spots on a stationary chapati are 6.1 cm apart (adjacent antinodes). The speed of light found from this is about:

  1. 3.0 × 10⁸ m s⁻¹
  2. 1.5 × 10⁸ m s⁻¹
  3. 6.0 × 10⁸ m s⁻¹
  4. 1.5 × 10⁶ m s⁻¹
Answer and explanation

Answer: A

Adjacent antinodes are λ/2 apart, so λ = 12.2 cm = 0.122 m. c = fλ = 2.45 × 10⁹ × 0.122 = 2.99 × 10⁸ m s⁻¹. Using 6.1 cm as the full wavelength gives the wrong 1.5 × 10⁸.

Which pairing of radiation and use is WRONG?

  1. Infrared: night vision photography
  2. Ultraviolet: sterilising surgical instruments
  3. Microwaves: detecting fractures in bones
  4. Gamma rays: radiotherapy for cancer
Answer and explanation

Answer: C

Fractures are detected with X-rays. Microwaves are used for RADAR, ovens and satellite links. The other pairings are correct.

Which list is in order of increasing frequency?

  1. X-rays, ultraviolet, visible, infrared
  2. microwaves, radio waves, infrared, visible
  3. visible, infrared, ultraviolet, gamma rays
  4. infrared, visible, ultraviolet, X-rays
Answer and explanation

Answer: D

From low to high frequency the order is radio, microwave, infrared, visible, ultraviolet, X-rays, gamma rays. Only 'infrared, visible, ultraviolet, X-rays' keeps that order.

In vacuum, the electric field of a wave is E = E₀ sin(kz − ωt) with k = 2.0 × 10⁷ m⁻¹. The wave belongs to the region of:

  1. infrared
  2. ultraviolet
  3. visible light
  4. X-rays
Answer and explanation

Answer: B

λ = 2π/k = 3.14 × 10⁻⁷ m = 314 nm; f = c/λ = 9.5 × 10¹⁴ Hz, above the visible limit of 8 × 10¹⁴ Hz and well below 10¹⁷ Hz: ultraviolet.

The electric field amplitude of an electromagnetic wave in vacuum is 300 V m⁻¹. The magnetic field amplitude is:

  1. 9 × 10¹⁰ T
  2. 1 × 10⁻⁸ T
  3. 1 × 10⁻⁶ T
  4. 3 × 10⁻⁶ T
Answer and explanation

Answer: C

B₀ = E₀/c = 300/(3 × 10⁸) = 1 × 10⁻⁶ T.

An LC oscillator with L = 2 μH and C = 50 pF radiates electromagnetic waves. Their wavelength is about:

  1. 18.8 m
  2. 1.88 m
  3. 188 m
  4. 6.0 m
Answer and explanation

Answer: A

√(LC) = √(10⁻¹⁶) = 10⁻⁸ s; f = 1/(2π × 10⁻⁸) = 1.59 × 10⁷ Hz; λ = c/f = 3 × 10⁸/1.59 × 10⁷ = 18.8 m.

Electromagnetic radiation carrying 9 J of energy falls on a perfectly reflecting surface. The momentum delivered to the surface is:

  1. 3 × 10⁻⁸ kg m s⁻¹
  2. 6 × 10⁻⁸ kg m s⁻¹
  3. 2.7 × 10⁹ kg m s⁻¹
  4. zero, since the light bounces off
Answer and explanation

Answer: B

On reflection the momentum changes from +U/c to −U/c, so Δp = 2U/c = 2 × 9/(3 × 10⁸) = 6 × 10⁻⁸ kg m s⁻¹.

Light of frequency 6 × 10¹⁴ Hz enters a non-magnetic medium of dielectric constant 4. Its wavelength in the medium is:

  1. 500 nm
  2. 1000 nm
  3. 125 nm
  4. 250 nm
Answer and explanation

Answer: D

n = √(ε_r μ_r) = √4 = 2, so v = 1.5 × 10⁸ m s⁻¹. The frequency is unchanged, so λ = v/f = 1.5 × 10⁸/6 × 10¹⁴ = 2.5 × 10⁻⁷ m = 250 nm (500 nm is the vacuum wavelength).

In a region with no conduction current, the electric flux through a loop changes at 1.0 × 10¹² V m s⁻¹. The value of ∮B·dl round the loop is about:

  1. 8.85 T m
  2. 1.26 × 10⁶ T m
  3. 1.1 × 10⁻⁵ T m
  4. zero
Answer and explanation

Answer: C

∮B·dl = μ₀ε₀ dΦ_E/dt = (4π × 10⁻⁷ × 8.85 × 10⁻¹²) × 10¹² = 1.11 × 10⁻¹⁷ × 10¹² = 1.1 × 10⁻⁵ T m. It is not zero, because the displacement current produces a field.

A closed surface encloses an electric dipole (charges +q and −q). The net electric flux through the surface is:

  1. zero
  2. q/ε₀
  3. 2q/ε₀
  4. −q/ε₀
Answer and explanation

Answer: A

Q_enclosed = +q − q = 0, so by Gauss's law ∮E·dA = 0, even though the field is not zero on the surface.

Which of Maxwell's equations tells us that magnetic field lines always form closed loops?

  1. ∮E·dl = −dΦ_B/dt
  2. ∮E·dA = Q/ε₀
  3. ∮B·dl = μ₀i_c + μ₀ε₀ dΦ_E/dt
  4. ∮B·dA = 0
Answer and explanation

Answer: D

Gauss's law for magnetism: zero net magnetic flux through every closed surface, so no field line starts or ends anywhere: the lines are closed loops and there are no monopoles.

While a capacitor is being charged, between its plates:

  1. both conduction and displacement currents are zero
  2. the conduction current is zero and the displacement current equals the current in the leads
  3. the conduction current equals the current in the leads
  4. the displacement current is twice the current in the leads
Answer and explanation

Answer: B

No charge crosses the dielectric, so there is no conduction current there, but the changing flux gives i_d = ε₀ dΦ_E/dt = dq/dt, equal to the current in the leads.

Maxwell needed to correct Ampere's circuital law because, for a charging capacitor:

  1. the conduction current in the wires is zero
  2. the magnetic field inside the plates is infinite
  3. the same loop gave different results for a flat surface and a surface passing between the plates
  4. Faraday's law failed between the plates
Answer and explanation

Answer: C

A flat surface pierced by the wire gives μ₀i_c, while a balloon surface passing through the gap is crossed by no conduction current and gives zero. Adding the displacement current removes the contradiction.

A parallel plate capacitor has plates of area 0.02 m², 1 mm apart, and the voltage across it changes at 10⁶ V s⁻¹. The displacement current between the plates is:

  1. 177 μA
  2. 17.7 μA
  3. 1.77 mA
  4. 8.85 μA
Answer and explanation

Answer: A

i_d = (ε₀A/d) dV/dt = (8.85 × 10⁻¹² × 0.02/10⁻³) × 10⁶ = 1.77 × 10⁻¹⁰ × 10⁶ = 1.77 × 10⁻⁴ A = 177 μA.

Light from a carbon arc is passed through sodium vapour and then through a prism. The spectrum seen is:

  1. two bright yellow lines on a dark background
  2. a continuous spectrum with two dark lines in the yellow region
  3. only yellow light
  4. dark bands across the whole spectrum
Answer and explanation

Answer: B

The arc gives a continuous spectrum; sodium vapour absorbs its own characteristic yellow wavelengths, leaving two dark lines there. Two bright lines would be the emission spectrum of a sodium flame.

A band spectrum is characteristic of:

  1. molecules
  2. atoms
  3. nuclei
  4. free electrons
Answer and explanation

Answer: A

Band spectra arise from excited molecules and depend on the molecule, so they are used to study molecular structure.

The dark Fraunhofer lines in the solar spectrum are produced because:

  1. sunlight is dispersed by Earth's oceans
  2. the Sun emits no light at those wavelengths from its interior
  3. the prism absorbs some colours
  4. gases in the Sun's cooler outer atmosphere absorb particular wavelengths
Answer and explanation

Answer: D

The hot interior emits a continuous spectrum; cooler gases above it absorb their own characteristic wavelengths, leaving dark lines: a line absorption spectrum.

Sharp bright lines of definite wavelengths, characteristic of an element, come from:

  1. excited molecules
  2. excited atoms
  3. hot solids
  4. a blue glass filter
Answer and explanation

Answer: B

Line spectra arise from excited atoms and are characteristic of the element. Molecules give band spectra and hot solids give continuous spectra.

Light from the filament of an incandescent bulb, passed through a prism, gives:

  1. a line emission spectrum
  2. a band emission spectrum
  3. a continuous emission spectrum
  4. a line absorption spectrum
Answer and explanation

Answer: C

A glowing solid emits all visible wavelengths, giving an unbroken band of colours from violet to red: a continuous emission spectrum.

Privacy · Terms · Refunds · Delivery