Unit 8 Dual Nature of Radiation and Matter
Practice questions
Which use of X-rays depends on their diffraction by the regular arrangement of atoms?
- Detecting bone fractures
- Studying crystal structures
- Treating tumours
- Checking welded joints
Answer and explanation
Answer: B
Atomic spacings in crystals are comparable to X-ray wavelengths, so crystals diffract X-rays; the pattern reveals the arrangement of atoms. The other uses rely on penetration or on damaging tissue.
If the accelerating voltage of an X-ray tube is increased, which change happens?
- The characteristic lines shift to shorter wavelengths
- The cut-off wavelength increases
- The cut-off wavelength decreases while the characteristic lines stay in place
- Both the cut-off and the lines stay the same
Answer and explanation
Answer: C
λ₀ = 12400/V decreases with V. The characteristic lines depend on the target's energy levels, so they stay at the same wavelengths.
An X-ray tube gives a shortest wavelength of 0.124 Å. The accelerating voltage is:
- 10 kV
- 100 kV
- 1.0 kV
- 12.4 kV
Answer and explanation
Answer: B
V = 12400/λ₀ = 12400/0.124 = 100000 V = 100 kV.
A proton (mass m_p, charge e) and an alpha particle (mass 4m_p, charge 2e) are accelerated through the same potential difference. The ratio λ_p : λ_α is:
- 1 : 1
- 2√2 : 1
- 2 : 1
- 1 : 2√2
Answer and explanation
Answer: B
λ = h/√(2mqV), so λ ∝ 1/√(mq). For the proton mq = m_p e; for the alpha 4m_p × 2e = 8m_p e. λ_p/λ_α = √(8m_p e/m_p e) = √8 = 2√2. The ratio is 2√2 : 1.
In the Davisson-Germer experiment with 54 V electrons, de Broglie's formula predicts a wavelength of about:
- 0.23 Å
- 1.67 Å
- 12.27 Å
- 6.6 Å
Answer and explanation
Answer: B
λ = 12.27/√54 = 12.27/7.35 = 1.67 Å, close to the 1.65 Å measured from the nickel crystal.
An electron and a photon each have a wavelength of 1.0 nm. Which has the greater momentum?
- The electron
- The photon
- Both have equal momentum
- The photon has no momentum
Answer and explanation
Answer: C
For both, p = h/λ. Equal wavelengths mean equal momenta, 6.6 × 10⁻²⁵ kg m s⁻¹.
On a graph of K_max against ν, the line for a metal cuts the K axis (extended) at −2.3 eV. The work function of the metal is:
- 2.3 eV
- −2.3 eV
- 4.6 eV
- 1.15 eV
Answer and explanation
Answer: A
K_max = hν − φ₀, so the intercept on the K axis is −φ₀. Hence φ₀ = 2.3 eV (potassium has about this value).
Two sources, one of 400 nm and one of 600 nm, each emit 1.0 × 10¹⁵ photons per second. The ratio of their powers (400 nm : 600 nm) is:
- 2 : 3
- 1 : 1
- 4 : 9
- 3 : 2
Answer and explanation
Answer: D
Power = nhc/λ. With equal n, P ∝ 1/λ, so P₄₀₀/P₆₀₀ = 600/400 = 3/2.
Light of frequency 2ν₀ falls on a metal of threshold frequency ν₀. The maximum kinetic energy of the photoelectrons is:
- hν₀
- 2hν₀
- zero
- hν₀/2
Answer and explanation
Answer: A
K_max = hν − hν₀ = h(2ν₀) − hν₀ = hν₀.
According to the wave theory, increasing the intensity of light should increase the maximum kinetic energy of photoelectrons. The experiment shows that it:
- increases the kinetic energy as predicted
- decreases the kinetic energy
- does not change the maximum kinetic energy
- stops emission
Answer and explanation
Answer: C
K_max is independent of intensity; this is one of the failures of the wave theory explained by Einstein's photon picture.
Photoelectrons from a surface are stopped by 0.60 V when light of 540 nm is used. The work function of the surface is about:
- 2.30 eV
- 1.70 eV
- 2.90 eV
- 0.60 eV
Answer and explanation
Answer: B
Photon energy = 1240/540 = 2.30 eV. φ₀ = hν − eV₀ = 2.30 − 0.60 = 1.70 eV.
In a photoelectric experiment the intensity of the light is halved and the frequency kept the same. The stopping potential:
- is halved
- is doubled
- becomes zero
- stays the same
Answer and explanation
Answer: D
Stopping potential depends on frequency and the metal, not on intensity. Halving intensity halves the current, not V₀.
Why does a negatively charged zinc plate lose its charge under ultraviolet light, while a negatively charged plate under red light does not?
- Red light photons have less energy than the work function of zinc
- Red light is more intense
- Ultraviolet light heats the plate more
- Red light is reflected by zinc
Answer and explanation
Answer: A
Red photons (about 1.8-2 eV) have less energy than zinc's work function, so no electrons are emitted however bright the light; ultraviolet photons have enough.
An electron is accelerated from rest through 50 V. Its kinetic energy is:
- 50 J
- 8.0 × 10⁻¹⁸ J
- 3.2 × 10⁻²¹ J
- 8.0 × 10⁻²⁰ J
Answer and explanation
Answer: B
K = eV = 50 eV = 50 × 1.602 × 10⁻¹⁹ = 8.0 × 10⁻¹⁸ J.
Which form of electron emission is used in a photomultiplier tube to multiply the number of electrons?
- Thermionic emission
- Field emission
- Secondary emission
- Photoelectric emission only
Answer and explanation
Answer: C
In a photomultiplier, fast electrons strike metal surfaces and knock out more electrons: secondary emission. The textbook lists photomultiplier tubes and image intensifiers as examples.
The Kα line of an element's X-ray spectrum is produced when an electron:
- moves from the K shell to the L shell
- is knocked out of the L shell
- is slowed down by a nucleus
- moves from the L shell into a vacancy in the K shell
Answer and explanation
Answer: D
The K series arises from transitions into a K-shell vacancy; Kα is the transition from the L shell (n = 2) to the K shell (n = 1).
The target of an X-ray tube is made of a metal with a high melting point because:
- such metals emit more electrons
- they reflect X-rays
- most of the electrons' kinetic energy becomes heat in the target
- they absorb ultraviolet light
Answer and explanation
Answer: C
Only a small part of the electrons' energy becomes X-rays; most becomes heat, so tungsten or molybdenum targets in a copper anode with cooling are used.
Bremsstrahlung means:
- radiation from electrons filling inner-shell vacancies
- radiation emitted by electrons as they are decelerated
- the photoelectric emission of electrons by X-rays
- secondary emission of electrons from the target
Answer and explanation
Answer: B
Bremsstrahlung ('braking radiation') is emitted when fast electrons are slowed by the nuclei of the target; it forms the continuous spectrum.
Which feature of the X-ray spectrum depends on the target material?
- The sharp characteristic peaks
- The cut-off wavelength
- The existence of a continuous spectrum
- The speed of the X-rays
Answer and explanation
Answer: A
The characteristic lines come from transitions between the inner shells of the target atoms, so their wavelengths identify the element. The cut-off depends only on the voltage.
The cut-off wavelength of X-rays from a tube operated at 40 kV is:
- 0.62 Å
- 0.31 Å
- 3.1 Å
- 0.031 Å
Answer and explanation
Answer: B
λ₀ = 12400/V Å = 12400/40000 = 0.31 Å.