Unit 1 Measurement
Practice questions
Which pair of items is matched with a suitable instrument?
- Gold ornament: common beam balance
- Diameter of a thin wire: metre scale
- Vegetables: beam balance; gold ornaments: digital balance
- Thickness of a cricket ball: screw gauge
Answer and explanation
Answer: C
Vegetables need only gram-level accuracy, so a beam balance suits them; gold needs milligram accuracy, so a digital balance suits it. A thin wire needs a screw gauge, and a cricket ball is too large for a screw gauge and is measured with a Vernier caliper.
A man of mass 70 kg goes to the Moon, where g ≈ 1.63 m/s². Which is true there?
- Mass 70 kg, weight about 114 N
- Mass about 11.7 kg, weight 686 N
- Mass 70 kg, weight 686 N
- Mass about 11.7 kg, weight about 114 N
Answer and explanation
Answer: A
Mass never changes: still 70 kg. Weight = 70 × 1.63 = 114.1 N, about 114 N. On the Earth it would be 70 × 9.8 = 686 N.
An object weighs 98 N on the Earth (g = 9.8 m/s²). What is its mass?
- 960.4 kg
- 98 kg
- 10 kg
- 1 kg
Answer and explanation
Answer: C
m = w ÷ g = 98 ÷ 9.8 = 10 kg. Multiplying gives 960.4, which would be a weight in newtons for a 98 kg mass, not this answer.
A stack of 200 sheets of paper measures 17.0 mm in a screw gauge. What is the thickness of one sheet?
- 0.17 mm
- 0.85 mm
- 0.0085 mm
- 0.085 mm
Answer and explanation
Answer: D
Thickness of one sheet = 17.0 mm ÷ 200 = 0.085 mm. Dividing by 100 by mistake would give 0.17 mm.
A screw gauge shows its 95th head division on the axis with the spindle touching the anvil. A wire then gives PSR = 0 mm and HSC = 52 (L.C. 0.01 mm). What is the correct diameter?
- 0.47 mm
- 0.52 mm
- 0.57 mm
- 1.47 mm
Answer and explanation
Answer: C
Zero error = −(100 − 95) × 0.01 = −0.05 mm, so zero correction = +0.05 mm. Observed = 0 + 52 × 0.01 = 0.52 mm. Correct = 0.52 + 0.05 = 0.57 mm.
A screw gauge has a pitch of 0.5 mm and 50 head divisions. With no zero error, PSR = 3 mm and HSC = 20 for a rod. What is its diameter?
- 3.20 mm
- 3.10 mm
- 3.40 mm
- 3.02 mm
Answer and explanation
Answer: A
L.C. = 0.5 ÷ 50 = 0.01 mm. Diameter = 3 + (20 × 0.01) = 3.20 mm. Using 0.005 or 0.001 for the least count gives the wrong values.
Why does a positive zero error in a Vernier caliper need a negative correction?
- Because readings are larger than the true value
- Because readings are smaller than the true value
- Because the least count doubles
- Because the main scale is wrong
Answer and explanation
Answer: A
With a positive zero error the Vernier zero is already to the right of the main zero when the jaws are closed, so every reading includes that extra amount. Subtracting it (a negative correction) gives the true value.
MSR = 8 cm, VSC = 4 and the caliper has a negative zero error of 0.02 cm (L.C. 0.01 cm). What is the correct reading?
- 8.02 cm
- 8.04 cm
- 8.06 cm
- 7.98 cm
Answer and explanation
Answer: C
Observed reading = 8 + (4 × 0.01) = 8.04 cm. For a negative zero error the correction is positive: 8.04 + 0.02 = 8.06 cm.
A Vernier caliper (L.C. 0.01 cm) gives MSR = 7 cm and VSC = 6 for a rubber ball, with no zero error. What is the ball's radius?
- 7.06 cm
- 3.53 cm
- 3.5 cm
- 14.12 cm
Answer and explanation
Answer: B
Diameter = 7 + (6 × 0.01) = 7.06 cm. Radius = 7.06 ÷ 2 = 3.53 cm. 7.06 cm is the diameter, not the radius.
The distance to a star is 6.52 light years. About how many parsecs is this? (1 pc = 3.26 ly)
- 21.3 pc
- 2 pc
- 0.5 pc
- 3.26 pc
Answer and explanation
Answer: B
Parsecs = light years ÷ 3.26 = 6.52 ÷ 3.26 = 2 pc. Multiplying instead gives about 21.3, the wrong way round.
Which is the correct order from smallest to largest?
- angstrom < nanometre < micron < millimetre
- nanometre < angstrom < millimetre < micron
- micron < nanometre < angstrom < millimetre
- millimetre < micron < nanometre < angstrom
Answer and explanation
Answer: A
1 Å = 10⁻¹⁰ m, 1 nm = 10⁻⁹ m, 1 µm = 10⁻⁶ m and 1 mm = 10⁻³ m. Larger negative powers mean smaller lengths, so angstrom < nanometre < micron < millimetre.
Inian says a light year is 9.46 × 10¹⁵ m; Ezhilan says it is 9.46 × 10¹² km. Who is right?
- Only Inian
- Only Ezhilan
- Neither
- Both
Answer and explanation
Answer: D
1 km = 10³ m, so 9.46 × 10¹⁵ m ÷ 10³ = 9.46 × 10¹² km. They have written the same distance in two different units, so both are right.
Which pair contains one fundamental and one derived quantity?
- Length and mass
- Area and volume
- Time and electric current
- Temperature and density
Answer and explanation
Answer: D
Temperature is one of the seven fundamental quantities; density is mass ÷ volume, so it is derived. Length, mass, time and current are all fundamental; area and volume are both derived.
Which statement about the SI rules is correct?
- Write 'Newton' with a capital N when the unit is spelt out
- Write the ampere's symbol as 'amp'
- Use J K⁻¹ mol⁻¹ rather than J/K/mol
- Write 5 kgs for five kilograms
Answer and explanation
Answer: C
Only one solidus is allowed in a unit, so J/K/mol is written J K⁻¹ mol⁻¹. Spelt-out units named after people take a small letter (newton), the ampere's symbol is A, and symbols have no plural.
Momentum is mass × velocity. What is its SI unit?
- kg m s⁻²
- kg m s⁻¹
- N m
- kg m²
Answer and explanation
Answer: B
Mass is in kg and velocity in m s⁻¹, so momentum is in kg × m s⁻¹ = kg m s⁻¹. kg m s⁻² is the newton (force) and N m is the joule (energy).
Which step does most to improve the accuracy of a measured length?
- Using a ruler with a broken zero end
- Reading the scale from one side
- Repeating the measurement and taking the average
- Measuring once quickly
Answer and explanation
Answer: C
Repeating a measurement and averaging reduces the effect of random human errors. A broken zero end or a slanted view adds errors instead of removing them.
A spring balance is accurate because the spring obeys Hooke's law. What does this law say?
- The extension of the spring is directly proportional to the load
- The spring breaks under any load
- The extension is the same for every load
- The extension halves when the load doubles
Answer and explanation
Answer: A
Hooke's law: within limits, the stretch of a spring is directly proportional to the load. Double the load and the extension doubles, so the scale can have equal markings.
An astronaut goes from the Earth to the Moon. What happens?
- Mass and weight both stay the same
- Mass stays the same, weight decreases
- Mass decreases, weight stays the same
- Both decrease to one-sixth
Answer and explanation
Answer: B
The amount of matter in the astronaut does not change, so mass is the same. The Moon's gravity is about one-sixth of the Earth's, so weight (mg) becomes about one-sixth.
A sack of rice has a mass of 25 kg. What is its weight on the Earth (g = 9.8 m/s²)?
- 25 N
- 2.55 N
- 34.8 N
- 245 N
Answer and explanation
Answer: D
w = mg = 25 × 9.8 = 245 N. Dividing instead of multiplying gives about 2.55, which is wrong.
Which instrument measures weight rather than mass?
- Beam balance
- Physical balance
- Spring balance
- Digital balance
Answer and explanation
Answer: C
A spring balance reads how far a spring stretches under the pull of gravity on the object, so it measures a force, the weight. Beam and physical balances compare masses directly.