Unit 12 Periodic Classification of Elements
Practice questions
Which alloy-metal pair is correctly matched?
- Brass - copper and tin
- Solder - lead and tin
- Bronze - copper and zinc
- Amalgam - iron and carbon
Answer and explanation
Answer: B
Solder is lead and tin. Brass is copper and zinc, bronze is copper and tin, and an amalgam contains mercury.
A goldsmith adds copper to gold for an ornament. The main reason is to
- make it conduct better
- make it an amalgam
- lower its weight greatly
- make it harder and stronger
Answer and explanation
Answer: D
Pure gold is soft; alloying with copper makes it harder and more durable. An amalgam would need mercury.
Which property is typical of non-metals?
- Poor conduction of heat and electricity
- Lustre
- Malleability
- Ductility
Answer and explanation
Answer: A
Non-metals are generally poor conductors and are dull and brittle as solids. Malleability, lustre and ductility are metallic properties.
Argon (Z = 18, mass 39.9) comes before potassium (Z = 19, mass 39.1) in the modern table. Why is this not a problem?
- Argon is a metal
- Potassium has no isotopes
- The table is ordered by atomic number, and 18 comes before 19
- Atomic masses were measured wrongly
Answer and explanation
Answer: C
The modern table uses atomic number, so argon (18) precedes potassium (19) regardless of mass. By mass alone the order would be reversed.
Why are group 18 elements also called rare gases?
- They do not react
- They are radioactive
- They occur in only very small amounts
- They are expensive metals
Answer and explanation
Answer: C
They are present in the air only in small quantities, hence 'rare'. Their lack of reactivity is why they are called inert or noble.
Which statement about hydrogen is correct?
- It can form both H⁺ and H⁻ ions
- It is a solid like the alkali metals
- It is a noble gas
- It has two electrons in its outer shell
Answer and explanation
Answer: A
With one electron, hydrogen can lose it (H⁺, like alkali metals) or gain one (H⁻, like halogens). It is a gas with one electron, not a noble gas.
Which block contains metals, non-metals and metalloids together?
- s-block
- f-block
- d-block
- p-block
Answer and explanation
Answer: D
The p-block (groups 13 to 18) has the widest variety: metals such as aluminium and lead, metalloids such as silicon and arsenic, and non-metals such as oxygen and chlorine.
To which block do the transition elements belong?
- s-block
- d-block
- p-block
- f-block
Answer and explanation
Answer: B
Transition elements in groups 3 to 12 make up the d-block in the centre of the table.
An element has configuration 2, 8, 7. What are its period and group?
- Period 7, group 3
- Period 2, group 7
- Period 3, group 17
- Period 3, group 1
Answer and explanation
Answer: C
Three shells place it in period 3; 7 valence electrons in the p-block put it in group 17 (the halogens). It is chlorine.
In which order were these ideas proposed?
- Mendeleev, Dobereiner, Newlands, Moseley
- Dobereiner, Newlands, Mendeleev, Moseley
- Newlands, Dobereiner, Moseley, Mendeleev
- Moseley, Mendeleev, Newlands, Dobereiner
Answer and explanation
Answer: B
Dobereiner's triads (1817), Newlands' octaves (1866), Mendeleev's table (1869) and Moseley's atomic number work (1913).
Mendeleev placed tellurium (127.6) before iodine (126.9) because
- he gave more importance to similar properties than to strict mass order
- he made an arithmetic error
- iodine is a metal
- tellurium has more isotopes
Answer and explanation
Answer: A
Iodine resembles chlorine and bromine, so Mendeleev kept it with them even though this broke the mass order. Atomic numbers (Te 52, I 53) later justified his choice.
Germanium's discovery in 1886 supported Mendeleev's table because
- it proved that atomic number was the basis
- it was a noble gas
- it filled the place of hydrogen
- its properties matched those he predicted for eka-silicon
Answer and explanation
Answer: D
Mendeleev left a gap below silicon and predicted eka-silicon's mass (about 72), density (5.5) and oxide formula (EsO₂). Germanium matched closely.
Which pair of elements did Newlands have to put into one slot?
- Sodium and potassium
- Cobalt and nickel
- Carbon and silicon
- Helium and neon
Answer and explanation
Answer: B
Newlands placed cobalt and nickel together in a single position, one of the weaknesses of his table.
Why did the discovery of the noble gases upset Newlands' law of octaves?
- They were too heavy to fit
- They reacted with all other elements
- They had no atomic mass
- Inserting them made the ninth element, not the eighth, resemble the first
Answer and explanation
Answer: D
Adding a noble gas (such as neon between fluorine and sodium) into each cycle meant the repeating pattern came every ninth element instead of every eighth.
Phosphorus (31.0), arsenic and antimony (121.8) are similar elements. If they formed a Dobereiner triad, arsenic's atomic mass would be about
- 90.8
- 152.8
- 76.4
- 45.4
Answer and explanation
Answer: C
(31.0 + 121.8) ÷ 2 = 152.8 ÷ 2 = 76.4. Arsenic's real atomic mass, about 74.9, is close to this.
An alloy containing mercury is called
- an amalgam
- bronze
- brass
- solder
Answer and explanation
Answer: A
When a metal is alloyed with mercury, the alloy is an amalgam. Bronze is copper and tin, brass is copper and zinc, and solder is lead and tin.
Solder, an alloy of lead and tin, is used to join electric wires because
- it is harder than steel
- it melts at a lower temperature than lead or tin
- it does not conduct electricity
- it is a non-metal
Answer and explanation
Answer: B
Solder has a lower melting point than each of its metals, so it can be melted easily to join wires without damaging them.
Which of these is a metalloid?
- Neon
- Iodine
- Calcium
- Arsenic
Answer and explanation
Answer: D
Arsenic, like boron, silicon and germanium, has properties of both metals and non-metals. Iodine and neon are non-metals; calcium is a metal.
The property of a metal that lets it be drawn into a wire is
- ductility
- malleability
- lustre
- brittleness
Answer and explanation
Answer: A
Ductility means a metal can be drawn into thin wires. Malleability means it can be beaten into sheets; lustre is shine.
Which metal is a liquid at room temperature?
- Sodium
- Aluminium
- Mercury
- Copper
Answer and explanation
Answer: C
Mercury is the only metal that is liquid at room temperature; the others are solids.