Unit 4 Electric charge and Electric current
Practice questions
A bird sits on one high-voltage overhead wire and is unharmed. Why?
- Birds' bodies are perfect insulators
- Overhead wires carry no current
- The bird's feathers store the charge
- Both feet are on the same wire, so there is almost no potential difference across its body
Answer and explanation
Answer: D
Current flows through a body only if there is a potential difference across it. Both feet touch the same wire at nearly the same potential, so practically no current passes through the bird.
Which group of devices all work mainly on the heating effect of current?
- Electric bell, motor, fan
- Electroplating bath, battery charger, cell
- Iron box, toaster, water heater
- Radio, mobile phone, calculator
Answer and explanation
Answer: C
An iron box, toaster and water heater all turn electrical energy into heat in high-resistance elements, the Joule heating effect.
Why can ac not be used for electroplating?
- ac has no voltage
- ac reverses direction, so metal deposited in one half-cycle tends to be removed in the next
- ac cannot pass through liquids
- ac is too weak
Answer and explanation
Answer: B
Electroplating needs ions to move steadily to the cathode. With ac the electrodes keep swapping roles, so a steady one-way current (dc) is needed.
A heater (4 A), an iron (3 A) and a lamp (0.5 A) are all on in a house wired in parallel. What is the main current?
- 7.5 A
- 4 A
- 6 A
- 1.5 A
Answer and explanation
Answer: A
In parallel the main current is the sum of the branch currents: 4 + 3 + 0.5 = 7.5 A.
Two resistors of 3 Ω and 6 Ω are in series across a 9 V battery and a current of 1 A flows. What is the p.d. across the 6 Ω resistor?
- 3 V
- 9 V
- 1.5 V
- 6 V
Answer and explanation
Answer: D
By V = IR, across 6 Ω: 1 × 6 = 6 V. The 3 Ω resistor has 3 V, and 6 + 3 = 9 V, the battery voltage.
Three identical bulbs are in series with a battery and the ammeter beside the battery reads 0.3 A. What is the current through the third bulb?
- 0.1 A
- 0.9 A
- 0.3 A
- 0 A
Answer and explanation
Answer: C
In a series circuit there is only one path, so the current is the same at every point: 0.3 A through each bulb.
What is the difference between e.m.f. and potential difference?
- They have different units
- e.m.f. is the voltage of a source when it sends no current; p.d. is the voltage between two points while current flows
- e.m.f. is measured with an ammeter
- p.d. exists only in cells
Answer and explanation
Answer: B
Both are measured in volts. e.m.f. describes the source's terminal voltage when no current is drawn; potential difference is the voltage across any two points, such as a bulb, when current flows.
The table gives V against I for a resistor: I = 0.5, 1.0, 2.0, 3.0, 4.0 A and V = 1.6, 3.4, 6.7, 10.2, 13.2 V. Its resistance is closest to
- 0.3 Ω
- 13.2 Ω
- 33 Ω
- 3.3 Ω
Answer and explanation
Answer: D
V/I gives about 3.2, 3.4, 3.35, 3.4 and 3.3 Ω. The best straight line through the V-I points has a slope of about 3.3 Ω, which is the resistance.
2 × 10⁴ C of charge flows through a heater, turning 5 × 10⁶ J of electrical energy into heat. What is the p.d. across it?
- 250 V
- 25 V
- 2500 V
- 100 V
Answer and explanation
Answer: A
V = W/q = 5 × 10⁶ ÷ 2 × 10⁴ = 2.5 × 10² = 250 V.
Which statement about conventional current is correct?
- It is the same as the direction of electron flow
- It flows from the negative to the positive terminal outside the cell
- It flows from the positive to the negative terminal outside the cell
- It does not exist in metals
Answer and explanation
Answer: C
Conventional current is taken as the flow of positive charge, from + to − through the outer circuit. Electrons actually flow the opposite way.
A lamp draws 0.2 A for one hour. How much charge passes through it?
- 12 C
- 720 C
- 0.2 C
- 18 000 C
Answer and explanation
Answer: B
t = 3600 s. q = It = 0.2 × 3600 = 720 C. Using 60 s instead of 3600 s gives the wrong 12 C.
The electric field at a point is measured by
- the work done on a unit positive charge
- the number of electrons there
- the current through that point
- the force on a unit positive charge placed there
Answer and explanation
Answer: D
Electric field is force per unit positive charge (N/C). Work per unit positive charge is the electric potential, a different idea.
Two charged balloons push each other away. What can you conclude?
- One is positive and one negative
- They carry like charges
- One of them is neutral
- They have no charge
Answer and explanation
Answer: B
Repulsion happens only between like charges (both positive or both negative). Unlike charges attract, and a neutral body is not repelled.
How many electrons carry a total charge of 8 nC?
- 5 × 10¹⁰
- 1.28 × 10⁻²⁷
- 5 × 10¹⁹
- 8 × 10⁹
Answer and explanation
Answer: A
q = 8 nC = 8 × 10⁻⁹ C. n = q/e = 8 × 10⁻⁹ ÷ 1.6 × 10⁻¹⁹ = 5 × 10¹⁰ electrons.
In current electricity, a positive charge on a body refers to
- presence of extra electrons
- presence of protons only
- absence (shortage) of electrons
- absence of protons
Answer and explanation
Answer: C
A body becomes positive when it has fewer electrons than protons, that is a shortage of electrons. Protons are fixed in nuclei and are not added or removed in charging.
Which is an advantage of ac over dc?
- ac can be stored in batteries
- ac voltage can easily be stepped up or down with a transformer
- ac is needed for electroplating
- ac flows in one direction only
Answer and explanation
Answer: B
Transformers work only with ac, so its voltage can be raised for long-distance transmission and lowered for homes. Storage, electroplating and one-way flow belong to dc.
Which device converts ac into dc?
- Inverter
- Transformer
- Fuse
- Rectifier
Answer and explanation
Answer: D
A rectifier (battery eliminator, dc adaptor) changes ac to dc. An inverter does the opposite, and a transformer changes the voltage of ac.
In an electrolyte such as copper sulphate solution, the current is carried by
- ions in the solution, along with electrons in the wires
- electrons only
- neutrons
- nothing; it does not conduct
Answer and explanation
Answer: A
In the outer wires electrons carry the current; in the solution charged ions move. So both electrons and ions are involved in conduction through an electrolyte.
Electroplating is an example of which effect of current?
- Heating effect
- Magnetic effect
- Chemical effect
- Lighting effect
Answer and explanation
Answer: C
Electroplating deposits metal from an electrolyte onto the cathode by electrolysis, which is a chemical effect of current.
The heating effect of electric current is also called
- Coulomb heating
- Joule heating
- Voltage heating
- Ampere heating
Answer and explanation
Answer: B
The conversion of electrical energy into heat in a resistance is called Joule heating, after James Prescott Joule, who studied it.