Unit 6 Light

Practice questions

The refractive index of diamond is 2.41. What can you say about light in diamond?

  1. It travels at 2.41 × 10⁸ m/s
  2. It travels faster than in air
  3. Its speed is the same as in vacuum
  4. It travels at about 1.24 × 10⁸ m/s, much slower than in air
Answer and explanation

Answer: D

v = c/µ = 3 × 10⁸ ÷ 2.41 ≈ 1.24 × 10⁸ m/s. A high refractive index means light travels slowly in the medium.

Why does a mirage appear on a hot road?

  1. Water evaporates from the road
  2. Light from the sky is totally internally reflected by hot, less dense air near the road
  3. The road acts as a concave mirror
  4. Heat makes light travel in straight lines
Answer and explanation

Answer: B

The hot air near the road has a lower refractive index. Light from the sky bends away from the normal as it comes down until it is totally reflected upward, so we see an image of the sky on the road, like water.

Light goes from medium 1 to medium 2 with i = 60° and r = 30°. What is ₁µ₂? (sin 60° = 0.866, sin 30° = 0.5)

  1. 0.577
  2. 2
  3. 1.732
  4. 0.5
Answer and explanation

Answer: C

₁µ₂ = sin i / sin r = 0.866 ÷ 0.5 = 1.732. Dividing the other way gives 0.577, which would mean light speeds up, but r < i shows medium 2 is denser.

In which medium is the speed of light greatest?

  1. Glass
  2. Vacuum
  3. Diamond
  4. Water
Answer and explanation

Answer: B

Light is fastest in vacuum, about 3 × 10⁸ m/s; in any material it is slower, and slowest in the material with the highest refractive index, such as diamond.

Why is a convex mirror preferred to a plane mirror as a rear-view mirror?

  1. It gives a magnified image
  2. It gives a real image
  3. It gives a much wider field of view
  4. It inverts the image
Answer and explanation

Answer: C

A convex mirror shows a larger area of the road behind in a small, erect image, a wider field of view than a plane mirror of the same size.

A convex mirror of focal length 20 cm shows a car 6 m behind. About how far behind the mirror is the image?

  1. 20.7 cm
  2. 600 cm
  3. 19.4 cm
  4. −19.4 cm in front
Answer and explanation

Answer: C

u = −600 cm, f = +20. 1/v = 1/20 + 1/600 = 31/600, so v = 600/31 ≈ 19.4 cm behind the mirror, a virtual image just inside F.

According to the sign convention, which has a negative focal length?

  1. A concave mirror
  2. A convex mirror
  3. A plane mirror
  4. Both concave and convex mirrors
Answer and explanation

Answer: A

A concave mirror's focus lies in front of it, against the direction of incident light, so its focal length is negative. A convex mirror's focus is behind it, so its focal length is positive.

An object 2 cm high is 16 cm from a concave mirror that forms a real image 3 cm high. Where is the image?

  1. 10.7 cm in front
  2. 24 cm behind
  3. 48 cm in front
  4. 24 cm in front
Answer and explanation

Answer: D

Real image: h₂ = −3 cm, so m = −3/2 = −1.5. m = −v/u gives −1.5 = −v/(−16) = v/16, so v = −24 cm: 24 cm in front of the mirror.

A 1 cm object is 15 cm in front of a concave mirror of focal length 10 cm. What is the image height?

  1. +2 cm (erect)
  2. −0.5 cm (inverted)
  3. −2 cm (inverted)
  4. +0.67 cm
Answer and explanation

Answer: C

1/v = −1/10 + 1/15 = −1/30, so v = −30 cm. m = −v/u = −(−30)/(−15) = −2. h₂ = −2 × 1 = −2 cm: real, inverted and 2 cm tall.

Which mirror can form both an erect enlarged image and an inverted same-size image?

  1. Concave mirror
  2. Convex mirror
  3. Plane mirror
  4. None
Answer and explanation

Answer: A

A concave mirror gives an erect, enlarged virtual image when the object is between F and P, and an inverted, same-size real image when the object is at C. Convex and plane mirrors give only erect images.

An object is placed at the focus of a concave mirror. Where is the image?

  1. At C
  2. At infinity
  3. At the pole
  4. Behind the mirror
Answer and explanation

Answer: B

Rays from an object at F leave the mirror parallel to each other, so they meet only at infinity: no image can be caught on a screen or seen in the mirror.

An object is placed between C and F of a concave mirror. The image is

  1. virtual, erect and magnified
  2. real, inverted and diminished between F and C
  3. at infinity
  4. real, inverted and magnified beyond C
Answer and explanation

Answer: D

For an object between C and F, the reflected rays meet beyond C, forming a real, inverted, magnified image.

A virtual image differs from a real image because a virtual image

  1. cannot be obtained on a screen and is erect
  2. is always inverted
  3. is formed where rays actually meet
  4. is always larger
Answer and explanation

Answer: A

Virtual images form where rays only appear to meet, so they cannot be caught on a screen, and they are erect. Real images form where rays actually meet and are inverted.

Which statement about lateral inversion is correct?

  1. A plane mirror swaps up and down
  2. A plane mirror forms a real image
  3. The image in a plane mirror appears left-right reversed, though the mirror really reverses front and back
  4. Lateral inversion happens only with convex mirrors
Answer and explanation

Answer: C

Each point is reflected straight back, so up stays up and left stays on the left of the mirror; the front-to-back reversal makes the image look left-right swapped to us.

Two plane mirrors are at right angles. A ray strikes the first at an angle of incidence of 30°. What is its angle of incidence on the second mirror?

  1. 30°
  2. 60°
  3. 90°
  4. 45°
Answer and explanation

Answer: B

The reflected ray leaves the first mirror at 30° to its normal, i.e. 60° to its surface. With the mirrors at 90°, this ray meets the second mirror at 30° to its surface, which is 90° − 30° = 60° to the second mirror's normal.

Optical fibres work on the principle of

  1. total internal reflection
  2. lateral inversion
  3. magnification by a convex mirror
  4. dispersion
Answer and explanation

Answer: A

Light inside the core strikes the core-cladding boundary at more than the critical angle and is totally reflected again and again, travelling along the fibre.

Which is a necessary condition for total internal reflection?

  1. Light must go from a rarer to a denser medium
  2. The angle of incidence must be zero
  3. Light must go from a denser to a rarer medium at an angle greater than the critical angle
  4. The two media must have equal refractive indices
Answer and explanation

Answer: C

Total internal reflection needs light travelling from the denser medium towards the rarer one, with an angle of incidence greater than the critical angle.

Light enters a glass plate of refractive index 1.5 from air (speed 3 × 10⁸ m/s). What is its speed in the glass?

  1. 4.5 × 10⁸ m/s
  2. 1.5 × 10⁸ m/s
  3. 3 × 10⁸ m/s
  4. 2 × 10⁸ m/s
Answer and explanation

Answer: D

v = c/µ = 3 × 10⁸ ÷ 1.5 = 2 × 10⁸ m/s. Multiplying instead would give a speed greater than in vacuum, which is impossible.

At what angle of incidence does a ray pass from one medium into another without bending?

  1. 0°
  2. 45°
  3. 90°
  4. At the critical angle
Answer and explanation

Answer: A

A ray along the normal (angle of incidence 0°) enters the second medium without any change in direction, although its speed changes.

A ray of light passes obliquely from air into glass. It bends

  1. away from the normal
  2. towards the normal
  3. not at all
  4. back into the air
Answer and explanation

Answer: B

Glass is optically denser than air, so light slows down and bends towards the normal; the angle of refraction is smaller than the angle of incidence.

Privacy · Terms · Refunds · Delivery