• Advanced
  • About 18 min
  • 5 practice questions

Reserves and funding, multi-step: the deposit multiplier, margins and the CASA effect

Use the simple deposit multiplier to find deposits and loans created from a reserve ratio, measure how a reserve change alters it, and calculate net interest margin before and after a shift in the deposit mix.

If something looks wrong, please tell us.

The foundation and practice courses treated CRR, SLR and CASA one bank at a time. Advanced questions widen the view: what a reserve requirement does to the whole banking system's ability to create deposits, and how a bank's deposit mix feeds through to its margin. Both rest on arithmetic you already know, chained together. Every rate, ratio, risk weight, margin and amount here is invented and labelled 'suppose'; none is an actual current figure or rule, and the models are the simplified ones used in questions.

The simple deposit multiplier

Suppose every bank keeps a fraction r of each deposit as reserves and lends out the rest, and every loan comes back into some bank as a new deposit. A first deposit D then supports deposits of D, D(1 − r), D(1 − r)², and so on, which add up to total deposits = D ÷ r. The multiplier is 1 ÷ r. Total loans = total deposits − D = D ÷ r − D, because the reserves held across the system add up to the original D. Real economies leak money out of this chain, because people hold cash and banks keep extra reserves, so the textbook multiplier is an upper limit, not a forecast.

The shortcut for a change: when r changes, the multiplier changes from 1 ÷ r₁ to 1 ÷ r₂, and the change in deposits = D × (1 ÷ r₂ − 1 ÷ r₁). Halving r doubles the multiplier; a small cut in a small r has a large effect.

Net interest margin

Net interest income = interest earned on loans and investments − interest paid on deposits and borrowings. Net interest margin (NIM) = net interest income ÷ interest-earning assets × 100. The deposit mix enters through the interest paid: moving money from costly term deposits to cheaper CASA deposits cuts interest paid and lifts NIM, with nothing else changing. Divide by earning assets, not by deposits; that is the commonest slip.

Speed method for a mix shift

You do not need to rebuild the whole statement when only the mix changes. Saving = amount moved × (old rate − new rate). The change in NIM = saving ÷ earning assets × 100. Add it to the old NIM.

Worked example 1: deposits and loans created

Suppose a first deposit of ₹1,000 crore enters a system in which banks keep 20% as reserves. Working: total deposits = 1,000 ÷ 0.2 = ₹5,000 crore; total loans = 5,000 − 1,000 = ₹4,000 crore; reserves = 20% of 5,000 = ₹1,000 crore, equal to the first deposit. If the ratio were raised to 25%, total deposits = 1,000 ÷ 0.25 = ₹4,000 crore, ₹1,000 crore less.

Worked example 2: NIM and a CASA shift

Suppose a bank has earning assets of ₹10,000 crore earning 9% and deposits of ₹9,000 crore costing 5% on average. Working: interest earned = ₹900 crore; interest paid = ₹450 crore; net interest income = ₹450 crore; NIM = 450 ÷ 10,000 × 100 = 4.5%. Now suppose ₹500 crore moves from term deposits at 7% into savings at 3%. Saving = 500 × 0.04 = ₹20 crore; NIM rises by 20 ÷ 10,000 × 100 = 0.2 point to 4.7%.

Worked example 3: a reserve cut in the system

Suppose the reserve ratio falls from 20% to 10% and the first deposit is ₹1,000 crore. Working: deposits rise from 1,000 ÷ 0.2 = ₹5,000 crore to 1,000 ÷ 0.1 = ₹10,000 crore, an increase of ₹5,000 crore. The multiplier doubled because the ratio halved.

Total deposits = first deposit ÷ reserve ratio; total loans = that − first deposit. NIM = (interest earned − interest paid) ÷ earning assets. Mix-shift saving = amount moved × rate gap.

Key takeaways: the deposit multiplier is 1 ÷ r and is an upper limit; loans created are total deposits less the first deposit; a change in r changes deposits by D × (1 ÷ r₂ − 1 ÷ r₁); NIM divides by earning assets; and a shift towards CASA raises NIM by the saving over earning assets.

Check your understanding

  1. 1. Suppose a first deposit of ₹500 crore enters a system in which banks keep 10% as reserves. In the simple model, what are total deposits?

    1. ₹4,500 crore
    2. ₹550 crore
    3. ₹5,000 crore
    4. ₹50 crore
    Show answer

    Answer: C. Total deposits = 500 ÷ 0.1 = ₹5,000 crore. ₹4,500 crore is total loans.

  2. 2. Suppose a first deposit of ₹2,000 crore enters a system with a 25% reserve ratio. In the simple model, what are total loans?

    1. ₹8,000 crore
    2. ₹6,000 crore
    3. ₹1,500 crore
    4. ₹2,500 crore
    Show answer

    Answer: B. Total deposits = 2,000 ÷ 0.25 = ₹8,000 crore; loans = 8,000 − 2,000 = ₹6,000 crore.

  3. 3. Suppose a bank has earning assets of ₹5,000 crore earning 10% and deposits of ₹4,500 crore costing 6%. What is its net interest margin?

    1. 4%
    2. 5.11%
    3. 2.3%
    4. 4.6%
    Show answer

    Answer: D. Earned = ₹500 crore; paid = ₹270 crore; net = ₹230 crore; NIM = 230 ÷ 5,000 × 100 = 4.6%. 5.11% divides by deposits; 4% is just the rate gap.

  4. 4. Suppose ₹300 crore moves from term deposits costing 7% into savings deposits costing 3.5%. By how much does the bank's yearly interest bill fall?

    1. ₹21 crore
    2. ₹10.5 crore
    3. ₹9 crore
    4. ₹30 crore
    Show answer

    Answer: B. Saving = 300 × (0.07 − 0.035) = ₹10.5 crore.

  5. 5. Suppose the reserve ratio falls from 20% to 10%. In the simple model, how much do total deposits rise from a first deposit of ₹1,000 crore?

    1. ₹5,000 crore
    2. ₹10,000 crore
    3. ₹500 crore
    4. ₹1,000 crore
    Show answer

    Answer: A. Deposits go from 1,000 ÷ 0.2 = ₹5,000 crore to 1,000 ÷ 0.1 = ₹10,000 crore, a rise of ₹5,000 crore.

Privacy · Terms · Refunds · Delivery