- Advanced
- About 17 min
- 5 practice questions
Assessing working capital: paid stock, eligible receivables and the gap
Calculate drawing power from paid stock and eligible receivables with different margins, spot an irregular account, and estimate bank finance from the working-capital gap.
If something looks wrong, please tell us.
At the advanced level, working-capital questions combine several adjustments in one problem: stock bought on credit, receivables that are too old to count, separate margins for each, and a sanctioned limit that may or may not bind. A second family of questions asks how a bank sizes the limit in the first place. This lesson takes both in turn. Every margin, cut-off and policy figure is invented ('suppose').
Paid stock and eligible receivables
Stock bought on credit and not yet paid for is, in effect, financed by the supplier. If the bank counted it as well, the same goods would be financed twice. So banks commonly reckon drawing power on paid stock: total stock minus unpaid creditors for that stock. Similarly, very old receivables are less likely to be collected, so a bank may count only eligible receivables, those within an age cut-off it sets. Stock and receivables usually carry different margins, because receivables are one step further from cash in some respects and one step nearer in others; the bank's policy decides.
Drawing power = (paid stock × stock lending share) + (eligible receivables × receivables lending share). Usable limit = the lower of drawing power and the sanctioned limit.
Worked example 1: a four-step drawing power
Suppose a bank's policy for Mehta Industries is: margin 25% on paid stock, 40% on receivables not older than 90 days. The stock statement shows stock ₹20,00,000, unpaid creditors for stock ₹5,00,000, receivables ₹12,00,000 of which ₹2,00,000 are older than 90 days. The sanctioned limit is ₹15,00,000 and the outstanding is ₹16,00,000. Step 1: paid stock = 20,00,000 − 5,00,000 = ₹15,00,000; at 75% = ₹11,25,000. Step 2: eligible receivables = 12,00,000 − 2,00,000 = ₹10,00,000; at 60% = ₹6,00,000. Step 3: drawing power = 11,25,000 + 6,00,000 = ₹17,25,000. Step 4: usable limit = lower of 17,25,000 and 15,00,000 = ₹15,00,000. The outstanding of ₹16,00,000 exceeds this by ₹1,00,000. Answer: drawing power ₹17,25,000; usable ₹15,00,000; the account is over the limit by ₹1,00,000, which the borrower must bring down. Trap: comparing the outstanding with drawing power alone and concluding the account is in order.
An account in which the outstanding stays above the lower of limit and drawing power is described as out of order in general banking language. That matters later: a running account that stays out of order for long enough can be treated as a non-performing asset, as the companion NPA course explains.
Sizing the limit: the working-capital gap
How does a bank decide the sanctioned limit itself? One classic approach starts from the working-capital gap: current assets (stock, receivables, cash and the like) minus current liabilities other than bank borrowing (such as trade creditors). The gap is what must be financed by the borrower's own long-term funds and the bank together. The bank expects the borrower to bring in a part, often expressed as a share of current assets, and finances the rest.
Working-capital gap = current assets − current liabilities other than bank borrowing. Bank finance = gap − borrower's required contribution.
Worked example 2: from the gap to the limit
Suppose a firm projects current assets of ₹50,00,000 and current liabilities other than bank borrowing of ₹20,00,000. The bank requires the borrower to fund 25% of current assets from long-term sources. What is the maximum bank finance? Working: gap = 50,00,000 − 20,00,000 = ₹30,00,000. Borrower's contribution = 25% of 50,00,000 = ₹12,50,000. Bank finance = 30,00,000 − 12,50,000 = ₹17,50,000. Answer: ₹17,50,000. Variant: if the contribution were 25% of the gap instead, it would be ₹7,50,000 and bank finance ₹22,50,000. Read which base the question uses; the two methods give very different answers, and the one based on current assets is the stricter.
Shortcuts
- Write the four steps (paid stock, eligible receivables, sum, compare with limit) as a column; most errors come from skipping step 4.
- Lending share = 100 − margin; multiply directly by 0.75, 0.6 and so on.
- If drawing power is below the outstanding, the shortfall is outstanding − drawing power; if the limit binds, it is outstanding − limit.
- For the gap method, always exclude bank borrowing from current liabilities, or the bank would be financing itself.
Key takeaways: count paid stock and eligible receivables only, each with its own margin; the usable limit is the lower of drawing power and the sanctioned limit; an outstanding above it means an irregular account; and bank finance can be sized as the working-capital gap minus the borrower's contribution, where the base for that contribution changes the answer.
Check your understanding
-
1. Suppose stock is ₹18,00,000, unpaid creditors for stock ₹6,00,000, margin on paid stock 25%, and there are no receivables. The limit is ₹10,00,000. What is the usable limit?
- ₹9,00,000
- ₹10,00,000
- ₹13,50,000
- ₹12,00,000
Show answer
Answer: A. Paid stock = 12,00,000; at 75% = ₹9,00,000. Lower of 9,00,000 and the 10,00,000 limit = ₹9,00,000.
-
2. Suppose receivables are ₹15,00,000, of which ₹3,00,000 are older than the bank's cut-off, and the margin on eligible receivables is 50%. What drawing power do receivables give?
- ₹7,50,000
- ₹6,00,000
- ₹12,00,000
- ₹4,50,000
Show answer
Answer: B. Eligible = 12,00,000; at 50% = ₹6,00,000. Using all 15,00,000 gives the wrong ₹7,50,000.
-
3. Suppose drawing power is ₹14,00,000, the limit is ₹20,00,000 and the outstanding is ₹15,50,000. By how much is the account over its usable limit?
- ₹4,50,000
- Nothing; it is within the limit
- ₹6,00,000
- ₹1,50,000
Show answer
Answer: D. Usable limit = lower of 14,00,000 and 20,00,000 = ₹14,00,000. Excess = 15,50,000 − 14,00,000 = ₹1,50,000.
-
4. Suppose current assets are ₹40,00,000 and current liabilities other than bank borrowing are ₹15,00,000. The borrower must fund 25% of current assets. What is the maximum bank finance?
- ₹25,00,000
- ₹18,75,000
- ₹15,00,000
- ₹10,00,000
Show answer
Answer: C. Gap = 25,00,000. Contribution = 25% of 40,00,000 = ₹10,00,000. Bank finance = ₹15,00,000. ₹18,75,000 uses 25% of the gap instead.
-
5. Why do banks often reckon drawing power on paid stock rather than total stock?
- Paid stock is always worth more
- The law forbids counting any stock
- Unpaid stock is already financed by suppliers, so counting it would finance the same goods twice
- Unpaid stock has no value
Show answer
Answer: C. Goods bought on credit are funded by trade creditors; deducting them avoids double financing.
Sign in to keep track of the lessons you finish.