• Practice
  • About 15 min
  • 5 practice questions

PCR and large-scale production

Explain the three steps of PCR, calculate copy numbers and cycles, and describe stirred-tank bioreactors and downstream processing.

If something looks wrong, please tell us.

Once a gene has been cloned, two questions follow: how do you get enough of the DNA to work with, and how do you get enough of the product to sell? PCR answers the first in the test tube; bioreactors and downstream processing answer the second in the factory. Both appear in exams as calculations and as ordering questions.

The polymerase chain reaction

PCR makes many copies of a chosen piece of DNA in a test tube. It needs the template DNA, two short single-stranded primers that match the ends of the target region, the four nucleotides and a heat-stable DNA polymerase. Each cycle has three steps.

  1. Denaturation: heating to a high temperature (around 94 °C) separates the two DNA strands.
  2. Annealing: on cooling, the two primers bind to their complementary sequences on the single strands.
  3. Extension: the DNA polymerase extends the primers using the nucleotides, copying the region between them (typically around 72 °C).

The polymerase used is Taq polymerase, isolated from the bacterium Thermus aquaticus, which lives in hot springs. It is thermostable: it survives the high temperature of denaturation in every cycle, so it need not be added again after each cycle.

Counting copies

Ideally each cycle doubles the number of DNA molecules. Starting with N0 double-stranded molecules, after n cycles there are N0 × 2^n. Learn a few powers of 2: 2^10 = 1,024 (about a thousand), 2^20 is about a million and 2^30 about a billion. To find the cycles needed, find the smallest power of 2 that reaches the required number.

Bioreactors

Small cultures in flasks cannot give large amounts of product. Bioreactors are vessels, often of 100 to 1,000 litres, in which cells are grown under controlled conditions. A stirred-tank bioreactor is usually cylindrical with a curved base; a stirrer mixes the contents evenly and spreads oxygen. In a sparged stirred-tank design, sterile air is bubbled through the medium to increase oxygen transfer. A bioreactor also has systems to control temperature and pH, a foam control system and sampling ports.

Downstream processing

After growth, the product must be made usable. Downstream processing includes separation and purification of the product, its formulation with suitable preservatives and, for medicines, thorough clinical trials. Strict quality control is applied throughout. A trap: preparing and sterilising the medium happens before the culture is grown, so it is not downstream processing.

Worked example 1: copies after n cycles

A sample contains 3 molecules of target DNA. How many are there after 8 cycles? 3 × 2^8 = 3 × 256 = 768 molecules. Trap answers multiply instead of using powers: 3 × 8 = 24 or 3 × 2 × 8 = 48.

Worked example 2: cycles needed

How many cycles are needed to turn one molecule into at least one million copies? 2^19 = 5,24,288, which is not enough. 2^20 = 10,48,576, which is more than one million. So 20 cycles are needed.

Worked example 3: why an ordinary polymerase fails

A student runs PCR with a DNA polymerase taken from E. coli. After the first cycle no more copies are made. Step 1: denaturation needs a high temperature in every cycle. Step 2: an ordinary bacterial polymerase loses its shape and activity at that temperature. Step 3: so it works at most once and would have to be added again after every cycle. Taq polymerase, from a hot-spring bacterium, stays active, which is what made automated PCR practical.

PCR: denaturation → annealing → extension, repeated. Copies = N0 × 2^n. Taq polymerase from Thermus aquaticus is thermostable. Bioreactor = controlled growth; downstream processing = separation, purification, formulation, trials.

— Rule to remember

Key takeaways

Remember the three PCR steps in order and why Taq polymerase is used. Copy numbers grow as powers of 2, so keep 2^10 ≈ 1,000 ready. Stirred-tank bioreactors mix and aerate cultures; downstream processing makes the product pure and safe.

Check your understanding

  1. 1. A PCR starts with 4 molecules of target DNA. How many are there after 6 cycles?

    1. 24
    2. 256
    3. 4,096
    4. 128
    Show answer

    Answer: B. 4 × 2^6 = 4 × 64 = 256. 24 multiplies 4 by 6; 4,096 is 4^6.

  2. 2. Taq polymerase is obtained from

    1. Escherichia coli
    2. Thermus aquaticus
    3. Agrobacterium tumefaciens
    4. Bacillus thuringiensis
    Show answer

    Answer: B. Taq stands for Thermus aquaticus, a bacterium of hot springs whose polymerase survives high temperatures.

  3. 3. The correct order of steps in one PCR cycle is

    1. annealing, denaturation, extension
    2. extension, annealing, denaturation
    3. denaturation, extension, annealing
    4. denaturation, annealing, extension
    Show answer

    Answer: D. Strands are first separated, then primers bind, then the polymerase extends them.

  4. 4. What is the minimum number of PCR cycles needed to get at least 1,000 copies from one molecule?

    1. 10
    2. 9
    3. 100
    4. 500
    Show answer

    Answer: A. 2^9 = 512 is too few; 2^10 = 1,024 reaches 1,000. So 10 cycles.

  5. 5. Which step is part of downstream processing?

    1. Sterilising the culture medium before inoculation
    2. Inserting the gene into the plasmid
    3. Purifying the product and formulating it with preservatives
    4. Choosing the host bacterium
    Show answer

    Answer: C. Downstream processing comes after growth: separation, purification, formulation and testing. The other steps come before.

Privacy · Terms · Refunds · Delivery