• Practice
  • About 12 min
  • 5 practice questions

Microscope and magnification problems: a practice set

Practise magnification, actual size, scale bars and field-of-view questions, and avoid the unit slips that cost marks.

If something looks wrong, please tell us.

Magnification questions look like maths but are really about units. A student who knows the formula can still lose the mark by dividing a number in millimetres by a number in micrometres. This lesson sets out the formulas once, then practises four question types: total magnification, actual size, scale bars and field of view. Work through each worked example with a pencil before reading the working, and check every answer by running the calculation backwards.

Formulas and units

  • Total magnification = eyepiece × objective.
  • Magnification = image size ÷ actual size, so actual size = image size ÷ magnification.
  • 1 mm = 1000 µm. Convert the measurements to the same unit before dividing.
  • If the magnification is increased by a factor, the diameter of the field of view falls by the same factor.
Four question types
Question typeWhat is givenFirst step
Total magnificationEyepiece and objectiveMultiply
Actual sizeDrawn size and magnificationConvert drawn size to µm, then divide
Scale barBar length on the picture and the length it stands forBar length ÷ stated length
Field of viewDiameter at one magnificationDivide by the new magnification ratio

Worked example 1: scale bar

Question: In a photograph of a cell a scale bar is 2 cm long and is labelled '10 µm'. What is the magnification of the photograph? Working: Change the bar length to micrometres: 2 cm = 20 mm = 20,000 µm. Magnification = 20,000 ÷ 10 = 2,000×. If a cell in the same photograph measures 3.0 cm, its actual length is 30,000 µm ÷ 2,000 = 15 µm.

Worked example 2: field of view

Question: (Illustrative.) At 100× the diameter of the field of view is 1.6 mm. The objective is changed so that the total magnification is 400×. What is the new diameter in µm, and how many cells of length 50 µm would fit in a line across it? Working: The magnification increased fourfold, so the diameter falls to 1.6 ÷ 4 = 0.4 mm = 400 µm. Number of cells = 400 ÷ 50 = 8 cells in a row.

Worked example 3: finding the objective

Question: A cell of actual length 25 µm appears 5 mm long in a drawing. The eyepiece is 10×. What is the power of the objective lens? Working: Convert the drawing to micrometres: 5 mm = 5,000 µm. Magnification = 5,000 ÷ 25 = 200×. Objective = 200 ÷ 10 = 20×.

Common traps

  • Dividing mm by µm without conversion, which gives an answer 1000 times too large or too small.
  • Adding eyepiece and objective instead of multiplying.
  • Using the size of the label instead of the length of the scale bar.
  • Believing that a higher magnification always shows more detail: resolution of the microscope sets the limit.

Same units first, then divide. Total magnification multiplies: eyepiece × objective.

Key takeaways

  • Multiply the lens powers to get total magnification.
  • Convert to the same units: 1 mm = 1000 µm.
  • Scale bar: magnification = bar length ÷ the real length it represents.
  • Raising the magnification narrows the field of view in proportion.

Check your understanding

  1. 1. A 10× eyepiece and a 45× objective give a total magnification of:

    1. 55×
    2. 450×
    3. 4.5×
    4. 350×
    Show answer

    Answer: B. 10 × 45 = 450×.

  2. 2. A scale bar of 3 cm stands for 15 µm. The magnification is:

    1. 200×
    2. 5×
    3. 20,000×
    4. 2,000×
    Show answer

    Answer: D. 3 cm = 30 mm = 30,000 µm. Magnification = 30,000 ÷ 15 = 2,000×.

  3. 3. A cell appears 4 mm long at 200× magnification. Its actual length is:

    1. 0.8 µm
    2. 800 µm
    3. 20 µm
    4. 2 µm
    Show answer

    Answer: C. 4 mm = 4,000 µm. Actual size = 4,000 ÷ 200 = 20 µm.

  4. 4. The field of view at 100× is 2 mm across (illustrative). At 400× it will be:

    1. 0.5 mm
    2. 1.0 mm
    3. 8.0 mm
    4. 2.0 mm
    Show answer

    Answer: A. Magnification is four times larger, so the diameter falls to 2 ÷ 4 = 0.5 mm.

  5. 5. Which is the usual mistake in magnification calculations?

    1. Converting to the same units
    2. Dividing image size by magnification
    3. Mixing millimetres and micrometres
    4. Multiplying the lens powers
    Show answer

    Answer: C. Dividing a value in mm by a value in µm without conversion gives a wrong answer by a factor of 1000.

Privacy · Terms · Refunds · Delivery