- Foundation
- About 14 min
- 5 practice questions
Testing food for starch, sugar, protein and fat
Learn the simple tests that show whether a food has starch, reducing sugar, protein or fat, and what colour change to expect.
If something looks wrong, please tell us.
How do we know that a potato has starch or that an egg has protein? We can find out by tests. Each test uses a chemical that changes colour (or leaves a mark) when a certain nutrient is present. In school these tests are done in a laboratory with a teacher, because some of the chemicals need careful handling and heating. Here we learn the idea and the results to expect.
The four tests
| Nutrient | Test | Positive result |
|---|---|---|
| Starch | Add a few drops of iodine solution to the food | The brown-yellow iodine turns blue-black |
| Reducing sugar (glucose) | Add Benedict's solution (blue) to the food solution and heat in a water bath | Blue changes to green, yellow, orange or brick red, depending on the amount of sugar |
| Protein | Biuret test: add sodium hydroxide, then a few drops of dilute copper sulphate | A purple or violet colour |
| Fat | Rub the food on paper and hold it to the light (or shake with ethanol and add water) | A translucent (see-through) oily spot that does not dry; or a cloudy white mixture |
In the Benedict's test, the more intense the change towards brick red, the more reducing sugar is present. Table sugar (sucrose) is not a reducing sugar, so it does not give this result unless it is first broken down.
Fair testing and the control
To be sure that a colour comes from the food, we run a control: the same test on plain water. If the water shows no change but the food does, we can trust the result. We also use small amounts and add chemicals one step at a time.
Worked examples
Example 1. A drop of iodine on a slice of boiled potato turns blue-black, but on a drop of water it stays brown. What do we conclude? Working: the potato contains starch. The water is the control and shows the normal iodine colour.
Example 2. A solution of fruit juice is heated with Benedict's solution and turns brick red. A glucose solution turns orange. Which has more reducing sugar? Working: brick red is further along the colour scale than orange, so the fruit juice contains more reducing sugar.
Example 3. A groundnut is crushed and rubbed on a sheet of paper, leaving a translucent spot. A piece of dry biscuit leaves no such spot. Which contains fat? Working: the groundnut. An oily, see-through spot that does not dry shows fat.
Example 4. Egg white solution with sodium hydroxide and a few drops of copper sulphate turns violet. What does it show? Working: the Biuret test is positive, so egg white contains protein.
Iodine: blue-black means starch. Benedict's: blue to red means reducing sugar. Biuret: violet means protein. Paper: oily spot means fat.
Safety
- Do these tests only with a teacher.
- Never taste any food or chemical in a laboratory.
- Hold test tubes with a holder, point them away from faces, and heat in a water bath.
Key takeaways
- Each test has a chemical and a colour change.
- A control shows the colour we expect when the nutrient is absent.
- Table sugar is not a reducing sugar.
Check your understanding
-
1. Iodine solution turns blue-black with:
- Protein
- Fat
- Glucose
- Starch
Show answer
Answer: D. Blue-black colour with iodine shows the presence of starch.
-
2. A purple or violet colour in the Biuret test shows the presence of:
- Protein
- Starch
- Fat
- Reducing sugar
Show answer
Answer: A. Violet colour after sodium hydroxide and copper sulphate is the positive result for protein.
-
3. In the Benedict's test the colour of the mixture changes from blue to brick red on heating. This shows:
- Starch in the food
- Fat in the food
- Reducing sugar
- Protein in the food
Show answer
Answer: C. A blue-to-red change with Benedict's solution on heating shows reducing sugar such as glucose.
-
4. A translucent spot that does not dry on paper after rubbing a food shows that the food has:
- Starch
- Fat
- Protein
- Water only
Show answer
Answer: B. A see-through oily mark means the presence of fat. Water dries.
-
5. Why do we also test plain water in the same way?
- To make the colour change brighter
- To use up the spare chemical
- To wash the test tubes clean
- To act as a control for comparison
Show answer
Answer: D. The control shows what the test looks like with no nutrient, so any change in the food sample can be trusted.
Sign in to keep track of the lessons you finish.