- Practice
- About 15 min
- 5 practice questions
Nerve impulse and the synapse
Explain the resting potential, depolarisation and repolarisation, use the sodium-potassium pump ratio, compute conduction times, and describe how a chemical synapse passes the message on.
If something looks wrong, please tell us.
A nerve impulse is a moving wave of electrical change along the membrane of an axon. Questions on it look technical, but they rest on three ideas: what keeps the membrane charged at rest, which ion rushes in first when it is stimulated, and how the message crosses the gap to the next cell. This lesson also gives a quick method for conduction-time calculations.
The resting membrane
At rest, the axon membrane is more permeable to potassium ions (K⁺) and nearly impermeable to sodium ions (Na⁺). The fluid inside the axon has a high concentration of K⁺ and negatively charged proteins and a low concentration of Na⁺; the fluid outside has a high concentration of Na⁺. The sodium-potassium pump actively moves 3 Na⁺ out for every 2 K⁺ in, using energy. As a result, the outer surface of the membrane is positive and the inner surface is negative. The membrane is said to be polarised, and the voltage across it is the resting potential.
Depolarisation and repolarisation
- A stimulus makes the membrane at that spot freely permeable to Na⁺.
- Na⁺ rushes in, so the inner surface becomes positive and the outer surface negative. This reversal is depolarisation, and the change in voltage is the action potential, which is the nerve impulse.
- The positive inside spreads a current to the next part of the membrane, which depolarises in turn, so the impulse travels along the axon.
- Soon the Na⁺ permeability falls and K⁺ moves out, restoring the resting charge. This is repolarisation, and the fibre becomes ready for the next stimulus.
In myelinated fibres the impulse jumps from one node of Ranvier to the next, which makes conduction much faster than in non-myelinated fibres of similar size. A common trap is to say the pump causes the impulse: the pump maintains the resting state, while the impulse is caused by Na⁺ entering through opened channels.
The synapse
A synapse is the junction where one neuron passes its message to the next. It has a presynaptic membrane, a postsynaptic membrane and, in a chemical synapse, a gap called the synaptic cleft. At an electrical synapse the membranes are very close and current flows directly, so transmission is faster; such synapses are rare in our system. At a chemical synapse, the impulse reaching the axon terminal makes synaptic vesicles release a neurotransmitter such as acetylcholine into the cleft. It binds to receptors on the postsynaptic membrane, opening ion channels, and a new potential is set up that may excite or inhibit the next neuron. Because only the presynaptic side releases transmitter and only the postsynaptic side has receptors, transmission is one-way.
Worked example 1: pump arithmetic
In a certain time the pump completes 30 cycles. Na⁺ moved out = 30 × 3 = 90. K⁺ moved in = 30 × 2 = 60. Net positive charges moved out = 90 − 60 = 30, one per cycle. This net outward movement of positive charge is one reason the inside stays negative.
Worked example 2: conduction time
An impulse travels 1 metre along a fibre at 50 metres per second. Time = distance ÷ speed = 1 ÷ 50 = 0.02 second = 20 milliseconds. Speed method: time in milliseconds = (distance in metres ÷ speed in metres per second) × 1000. If the same distance is covered at 2 metres per second, as in a thin non-myelinated fibre, the time is 500 milliseconds, 25 times longer.
Rest: outside positive, inside negative; pump 3 Na⁺ out, 2 K⁺ in. Impulse: Na⁺ in (depolarisation), then K⁺ out (repolarisation). Chemical synapse: vesicles release transmitter, receptors on the next cell, one-way only.
Key takeaways
Remember which ion does what: sodium in for depolarisation, potassium out for repolarisation, the pump for keeping the resting state. Myelin speeds conduction by making the impulse jump between nodes. At chemical synapses the transmitter carries the message across the cleft, which is why transmission goes in one direction only.
Check your understanding
-
1. At rest, the inner surface of an axon membrane is:
- Negatively charged compared with the outside
- Positively charged compared with the outside
- At the same charge as the outside
- Permeable only to sodium ions
Show answer
Answer: A. The resting membrane is polarised: outer surface positive, inner surface negative.
-
2. In each cycle the sodium-potassium pump moves:
- 2 Na⁺ out and 3 K⁺ in
- 3 Na⁺ out and 2 K⁺ in
- 3 K⁺ out and 2 Na⁺ in
- 1 Na⁺ out and 1 K⁺ in
Show answer
Answer: B. The pump exchanges 3 sodium ions outward for 2 potassium ions inward, using energy.
-
3. Depolarisation of the axon membrane is caused mainly by:
- Rapid exit of K⁺ from the axon
- The sodium-potassium pump speeding up
- Rapid entry of Na⁺ into the axon
- Release of acetylcholine inside the axon
Show answer
Answer: C. A stimulus opens the membrane to Na⁺, which rushes in and reverses the charge. K⁺ exit causes repolarisation.
-
4. An impulse travels 0.8 m along a fibre at 40 m per second. How long does it take?
- 20 milliseconds
- 32 milliseconds
- 50 milliseconds
- 2 milliseconds
Show answer
Answer: A. Time = 0.8 ÷ 40 = 0.02 s = 20 ms.
-
5. At a chemical synapse, the neurotransmitter is released from:
- Receptors on the postsynaptic membrane
- The nucleus of the next neuron
- The myelin sheath
- Synaptic vesicles in the presynaptic axon terminal
Show answer
Answer: D. Vesicles in the axon terminal release the transmitter into the cleft; receptors on the postsynaptic membrane receive it.
Sign in to keep track of the lessons you finish.