- Foundation
- About 16 min
- 5 practice questions
The section formula and the mid-point formula
Find the point that divides a line segment internally in a given ratio using the section formula, and find mid-points with the mid-point formula.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what it means for a point to divide a segment internally in the ratio m₁ : m₂.
- Derive and use the section formula.
- Use the mid-point formula, and use it backwards to find a missing endpoint.
Suppose two shops stand at A and B along a straight road, and a bus stop is to be placed so that it is twice as far from A as from B. Where exactly is that? The section formula answers questions like this: it gives the coordinates of a point that splits a segment in any given ratio.
Dividing a segment in a ratio
A point P on the segment AB divides it internally in the ratio m₁ : m₂ if AP : PB = m₁ : m₂. For example, if AP : PB = 1 : 2, then P is one-third of the way from A to B.
Deriving the section formula
Let A(x₁, y₁), B(x₂, y₂) and let P(x, y) divide AB in the ratio m₁ : m₂. Draw perpendiculars from A, P and B to the x-axis, and horizontal lines through A and P, forming two small right triangles: one with hypotenuse AP and one with hypotenuse PB. These triangles have equal angles (their horizontal sides are parallel and their hypotenuses lie on the same line), so they are similar by AA. Their horizontal sides are x − x₁ and x₂ − x, and their vertical sides are y − y₁ and y₂ − y. By similarity, (x − x₁)/(x₂ − x) = m₁/m₂ = (y − y₁)/(y₂ − y). Solving the first equation: m₂(x − x₁) = m₁(x₂ − x), so m₁x + m₂x = m₁x₂ + m₂x₁ and x = (m₁x₂ + m₂x₁)/(m₁ + m₂). The y-coordinate is found the same way.
Section formula: the point dividing the join of A(x₁, y₁) and B(x₂, y₂) internally in the ratio m₁ : m₂ is ((m₁x₂ + m₂x₁)/(m₁ + m₂), (m₁y₂ + m₂y₁)/(m₁ + m₂)). Mid-point (ratio 1 : 1): ((x₁ + x₂)/2, (y₁ + y₂)/2).
Memory aid: m₁ is the part next to A, but it multiplies the coordinates of B, the far end. Cross-multiply: m₁ with B, m₂ with A. Mixing these up is the most common error.
Using the section formula
- Name the points A(x₁, y₁) first, B(x₂, y₂) second, ratio AP : PB = m₁ : m₂.
- Cross-multiply m₁ × B's coordinate plus m₂ × A's coordinate.
- Divide by m₁ + m₂ Do this for x and for y separately.
- Check P should lie between A and B, nearer the end with the smaller share.
Worked example 1: ratio 1 : 2
Find the point P that divides the join of A(2, −3) and B(8, 9) in the ratio 1 : 2. Working: x = (1 × 8 + 2 × 2)/(1 + 2) = (8 + 4)/3 = 4. y = (1 × 9 + 2 × (−3))/3 = (9 − 6)/3 = 1. So P = (4, 1). Check with distances: AP = √(2² + 4²) = √20 and PB = √(4² + 8²) = √80 = 2√20, so AP : PB = 1 : 2.
Worked example 2: ratio 3 : 2
Find the point dividing the join of A(−1, 4) and B(9, −6) in the ratio 3 : 2. Working: x = (3 × 9 + 2 × (−1))/5 = (27 − 2)/5 = 25/5 = 5. y = (3 × (−6) + 2 × 4)/5 = (−18 + 8)/5 = −10/5 = −2. The point is (5, −2).
Worked example 3: mid-point
Find the mid-point of (−4, 7) and (6, −1). Working: x = (−4 + 6)/2 = 1 and y = (7 + (−1))/2 = 3. The mid-point is (1, 3).
Worked example 4: finding an endpoint
M(2, 3) is the mid-point of the segment joining A(−1, 5) and B. Find B. Working: let B = (p, q). (−1 + p)/2 = 2 gives p = 5, and (5 + q)/2 = 3 gives q = 1. So B = (5, 1). Check: the mid-point of (−1, 5) and (5, 1) is (2, 3).
Mid-point formula and section formula
-
Mid-point formula
- Ratio is 1 : 1
- Average the x's and average the y's
- Used for centres and for diagonals that bisect each other
-
Section formula
- Any ratio m₁ : m₂
- Weighted average: m₁ with B, m₂ with A
- Used for points of trisection and for given ratios
Key takeaways: a point dividing AB internally in the ratio m₁ : m₂ is ((m₁x₂ + m₂x₁)/(m₁ + m₂), (m₁y₂ + m₂y₁)/(m₁ + m₂)); the formula comes from similar triangles. Remember the cross pattern: m₁ multiplies B and m₂ multiplies A. The mid-point is the special case m₁ = m₂, the average of the coordinates, and it can be used backwards to find a missing endpoint.
Check your understanding
-
1. What is the mid-point of the segment joining (3, −5) and (−7, 9)?
- (2, −2)
- (−5, 7)
- (−2, 2)
- (−4, 4)
Show answer
Answer: C. x = (3 + (−7))/2 = −4/2 = −2 and y = (−5 + 9)/2 = 4/2 = 2. The mid-point is (−2, 2). (−4, 4) forgets to divide by 2.
-
2. Which point divides the join of (0, 0) and (10, 5) internally in the ratio 2 : 3?
- (4, 2)
- (6, 3)
- (2, 1)
- (5, 2.5)
Show answer
Answer: A. x = (2 × 10 + 3 × 0)/5 = 20/5 = 4 and y = (2 × 5 + 3 × 0)/5 = 10/5 = 2. The point is (4, 2). Using 3 with B instead gives (6, 3), which divides the segment in the ratio 3 : 2.
-
3. Which point divides the join of A(−2, 1) and B(6, 5) internally in the ratio 3 : 1?
- (0, 2)
- (4, 4)
- (2, 3)
- (4, 2)
Show answer
Answer: B. x = (3 × 6 + 1 × (−2))/4 = (18 − 2)/4 = 4 and y = (3 × 5 + 1 × 1)/4 = 16/4 = 4. So the point is (4, 4). (0, 2) is the point for the ratio 1 : 3, and (2, 3) is the mid-point.
-
4. (2, 3) is the mid-point of the segment joining (x, 5) and (6, y). What are x and y?
- x = 2, y = 1
- x = −2, y = −1
- x = 4, y = 8
- x = −2, y = 1
Show answer
Answer: D. (x + 6)/2 = 2 gives x + 6 = 4, so x = −2. (5 + y)/2 = 3 gives 5 + y = 6, so y = 1.
-
5. P divides the join of A(x₁, y₁) and B(x₂, y₂) internally in the ratio m₁ : m₂ (AP : PB). What is the x-coordinate of P?
- (m₁x₂ + m₂x₁)/(m₁ + m₂)
- (m₁x₁ + m₂x₂)/(m₁ + m₂)
- (m₁x₂ − m₂x₁)/(m₁ − m₂)
- (x₁ + x₂)/(m₁ + m₂)
Show answer
Answer: A. In the section formula, m₁ (the share next to A) multiplies the far end's coordinate x₂, and m₂ multiplies x₁; then divide by m₁ + m₂. Pairing m₁ with x₁ places the point nearer the wrong end.
Sign in to keep track of the lessons you finish.