• Foundation
  • About 16 min
  • 5 practice questions

Balancing chemical equations step by step

Use the law of conservation of mass to balance chemical equations by the hit-and-trial method, check the atom count, and add state symbols.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a chemical equation must be balanced.
  • Balance an equation by changing coefficients only, never the formulae.
  • Check a balanced equation by counting the atoms of every element on both sides.

In a chemical reaction atoms are not created or destroyed; they only rearrange to form new substances. So the total mass of the products equals the total mass of the reactants. This is the law of conservation of mass, and it is the reason every chemical equation must be balanced.

Law of conservation of mass: mass can neither be created nor destroyed in a chemical reaction. So the number of atoms of each element must be the same on both sides of a chemical equation.

Coefficients, not subscripts

A subscript is part of a formula: the 2 in H₂O tells you one water molecule has two hydrogen atoms. Changing it would change the substance (H₂O₂ is hydrogen peroxide, not water). A coefficient is the number written in front of a formula: 3H₂O means three water molecules. When balancing, you may change only the coefficients.

The hit-and-trial method

Balancing an equation

  1. Write the skeletal equation Use correct formulae for every reactant and product.
  2. Count the atoms Make a table of each element on the LHS and RHS.
  3. Start with the biggest formula Pick the compound with the most atoms and balance its most common element first.
  4. Balance the rest one by one Adjust coefficients; leave free elements such as O₂ or Fe for last.
  5. Check and add states Recount every element, use the smallest whole numbers, then add (s), (l), (g), (aq).

Worked example 1: aluminium burning in oxygen

Skeletal: Al + O₂ → Al₂O₃

Atom count before balancing
ElementLHSRHS
Al12
O23

Oxygen first (it is in the biggest formula). The smallest number that both 2 and 3 divide into is 6. So we need 3O₂ (3 × 2 = 6 atoms) and 2Al₂O₃ (2 × 3 = 6 atoms): Al + 3O₂ → 2Al₂O₃.

Now aluminium: the right side has 2 × 2 = 4 Al atoms, so put 4 in front of Al: 4Al + 3O₂ → 2Al₂O₃.

Check: Al: 4 on the left, 2 × 2 = 4 on the right. O: 3 × 2 = 6 on the left, 2 × 3 = 6 on the right. Balanced. With states: 4Al(s) + 3O₂(g) → 2Al₂O₃(s).

Worked example 2: burning propane (cooking gas component)

Skeletal: C₃H₈ + O₂ → CO₂ + H₂O

  1. Carbon: 3 on the left, so write 3CO₂ on the right.
  2. Hydrogen: 8 on the left; each H₂O has 2 H, so write 4H₂O (4 × 2 = 8).
  3. Oxygen (free element, done last): the right side now has 3 × 2 = 6 from CO₂ plus 4 × 1 = 4 from H₂O, total 10. Each O₂ has 2 atoms, so write 5O₂ (5 × 2 = 10).
  4. Result: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O.
  5. Check: C 3 = 3; H 8 = 4 × 2 = 8; O 5 × 2 = 10 = 6 + 4. Balanced.

Worked example 3: sodium and water

Skeletal: Na + H₂O → NaOH + H₂. Hydrogen: 2 on the left, 1 + 2 = 3 on the right. Try 2H₂O and 2NaOH: left H = 4, right H = 2 + 2 = 4; left O = 2, right O = 2. Then sodium needs 2Na. Balanced: 2Na(s) + 2H₂O(l) → 2NaOH(aq) + H₂(g).

Common mistakes

  • Changing a formula, such as writing H₂O₂ to get two oxygens. Only coefficients may change.
  • Forgetting that a coefficient multiplies every atom in the formula: 2Al₂O₃ has 4 Al and 6 O.
  • Stopping before rechecking every element after the last change.
  • Leaving coefficients that share a common factor, such as 4, 6, 2 instead of 2, 3, 1.

Key takeaways: balance equations because mass is conserved. Change only coefficients. Start with the largest formula, leave free elements to the end, recount everything, and use the smallest whole-number coefficients. State symbols are added after balancing.

Check your understanding

  1. 1. Which law is the reason chemical equations must be balanced?

    1. Law of conservation of energy
    2. Law of conservation of mass
    3. Law of constant speed
    4. Law of reflection
    Show answer

    Answer: B. Atoms are neither created nor destroyed in a reaction, so mass is conserved. The number of atoms of each element must therefore be equal on both sides.

  2. 2. To balance H₂ + Cl₂ → HCl, what should you do?

    1. Change HCl to H₂Cl₂
    2. Write 2H₂ on the left
    3. Write 2HCl on the right
    4. Remove Cl₂ from the left
    Show answer

    Answer: C. Left: 2 H and 2 Cl. Right: 1 H and 1 Cl. Putting 2 in front of HCl gives 2 H and 2 Cl on the right: H₂ + Cl₂ → 2HCl. Changing the formula to H₂Cl₂ is never allowed.

  3. 3. How many oxygen atoms are shown in 3Fe₂O₃?

    1. 3
    2. 6
    3. 5
    4. 9
    Show answer

    Answer: D. The coefficient multiplies every atom in the formula: 3 × 3 oxygen atoms = 9 oxygen atoms (and 3 × 2 = 6 iron atoms).

  4. 4. Which is the correctly balanced equation for magnesium burning in oxygen?

    1. 2Mg + O₂ → 2MgO
    2. Mg + O₂ → MgO
    3. Mg + O₂ → MgO₂
    4. Mg + 2O₂ → 2MgO
    Show answer

    Answer: A. 2Mg + O₂ → 2MgO: Mg 2 = 2 and O 2 = 2. Mg + O₂ → MgO has 2 O on the left but 1 on the right; MgO₂ is the wrong formula; Mg + 2O₂ → 2MgO has 4 O on the left and 2 on the right.

  5. 5. Balance: Fe₂O₃ + CO → Fe + CO₂. What are the coefficients, in order?

    1. 1, 1, 2, 1
    2. 1, 3, 2, 3
    3. 2, 3, 4, 3
    4. 1, 2, 2, 2
    Show answer

    Answer: B. Fe: 2 on the left, so 2Fe. Each CO takes one O from Fe₂O₃ to become CO₂, and Fe₂O₃ has 3 O, so 3CO and 3CO₂. Check O: 3 + 3 = 6 on the left and 3 × 2 = 6 on the right; C: 3 = 3. So Fe₂O₃ + 3CO → 2Fe + 3CO₂, coefficients 1, 3, 2, 3.

Privacy · Terms · Refunds · Delivery