- Foundation
- About 14 min
- 5 practice questions
Refraction of light through a glass prism
Trace a ray of light through a triangular glass prism, name the angle of the prism and the angle of deviation, and compare a prism with a rectangular glass slab.
If something looks wrong, please tell us.
By the end of this lesson you can
- Name the faces, the angle of the prism, the angle of incidence, the angle of emergence and the angle of deviation.
- Trace the path of a ray through a triangular prism and explain why it bends towards the base.
- Contrast refraction through a prism with refraction through a rectangular glass slab.
In the last chapter, a ray passing through a rectangular glass slab came out parallel to its original direction. A triangular glass prism behaves differently, because its two refracting faces are not parallel. This difference is the key to the colours of the next lesson.
Parts of a prism
A triangular prism has two triangular bases and three rectangular side faces. Light enters through one rectangular face and leaves through another. The angle between these two refracting faces is the angle of the prism (A). The face opposite this angle is the base of the prism.
| Term | Meaning |
|---|---|
| Incident ray | The ray striking the first face |
| Angle of incidence (i) | Angle between the incident ray and the normal to the first face |
| Refracted ray | The ray travelling inside the glass |
| Emergent ray | The ray leaving the second face |
| Angle of emergence (e) | Angle between the emergent ray and the normal to the second face |
| Angle of deviation (D) | Angle between the direction of the incident ray (extended) and the emergent ray |
Tracing the ray
A ray passing through a prism
- Enters the first face Air to glass: bends towards the normal.
- Travels through the glass Moves in a straight line inside the prism.
- Leaves the second face Glass to air: bends away from the normal.
- Emerges deviated Both bendings turn the ray towards the base of the prism.
At each face the ray obeys the laws of refraction from the previous chapter. Because the two faces are inclined to each other, the two bendings do not cancel. Both turn the ray in the same sense, towards the base. The total turning is the angle of deviation D.
A prism bends light twice in the same sense, so the emergent ray is deviated towards the base of the prism by an angle D.
Glass slab and glass prism
-
Rectangular glass slab
- Refracting faces are parallel
- Second bending undoes the first
- Emergent ray parallel to incident ray
- Only a sideways (lateral) shift
-
Triangular glass prism
- Refracting faces meet at the angle of the prism
- Both bendings turn the ray towards the base
- Emergent ray is not parallel to incident ray
- Ray is deviated by an angle D
Worked example 1: a ray along the normal
A ray strikes the first face of a prism along the normal. Working: with i = 0°, the ray does not bend at the first face, since a ray along the normal passes straight through. It reaches the second face at an angle, so it bends away from the normal there as it leaves into air. The ray is still deviated, towards the base, but all of the bending happens at the second face.
Worked example 2: which way does the beam turn?
A teacher shines a narrow beam of red light horizontally at a prism standing on its triangular face. Case (a): the base of the prism is at the bottom. Case (b): the prism is turned so that its base is at the top. Which way does the beam turn in each case? Working: a prism always deviates light towards its base. In case (a) the emergent beam turns downwards; in case (b) it turns upwards. In both cases the beam bends towards the normal on entering and away from the normal on leaving, and both bendings turn it towards the base. (Never look into a laser beam directly.)
Key takeaways: a prism's two refracting faces are inclined at the angle of the prism. The ray bends towards the normal on entering and away from the normal on leaving, and both bendings turn it towards the base. The angle between the incident and emergent directions is the angle of deviation. Unlike a slab, a prism does not give an emergent ray parallel to the incident ray.
Check your understanding
-
1. The angle between the two refracting faces of a prism is called
- the angle of deviation
- the angle of the prism
- the angle of emergence
- the critical angle
Show answer
Answer: B. The angle between the two faces through which light enters and leaves is the angle of the prism, A.
-
2. A ray passing through a glass prism bends
- towards the base of the prism
- towards the apex (the angle of the prism)
- only at the first face
- not at all if the glass is clear
Show answer
Answer: A. On entering, the ray bends towards the normal; on leaving, away from the normal. Because the faces are inclined, both bendings turn the ray towards the base.
-
3. The angle of deviation is the angle between
- the incident ray and the normal
- the emergent ray and the normal
- the refracted ray and the base
- the incident ray extended and the emergent ray
Show answer
Answer: D. Deviation measures how far the ray has been turned from its original direction: the angle between the incident ray (extended forward) and the emergent ray.
-
4. Why does the emergent ray from a rectangular glass slab come out parallel to the incident ray, but that from a prism does not?
- The slab is thicker than the prism
- The slab's faces are parallel, while the prism's refracting faces are inclined
- Glass in a prism has a different refractive index
- The prism reflects light instead of refracting it
Show answer
Answer: B. In a slab, the bending at the second, parallel face exactly undoes the first. In a prism the faces meet at an angle, so the two bendings add up instead of cancelling.
-
5. Assertion (A): A ray of light entering a prism bends towards the normal at the first face.
Reason (R): Light passes from an optically rarer medium (air) to an optically denser medium (glass).- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. A ray going from a rarer to a denser medium slows down and bends towards the normal, so R correctly explains A.
Sign in to keep track of the lessons you finish.