- Foundation
- About 16 min
- 5 practice questions
Chemical properties of carbon compounds
Describe combustion, oxidation with oxidising agents, addition (hydrogenation) and substitution reactions of carbon compounds, and explain clean and sooty flames.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write balanced equations for the combustion of carbon compounds and explain clean and sooty flames.
- Describe the oxidation of ethanol to ethanoic acid using oxidising agents.
- Tell an addition reaction from a substitution reaction and give an example of each.
Most of the fuels we use, from LPG and kerosene to coal and wood, are carbon or its compounds. Knowing how carbon compounds react explains how fuels burn, how oils are hardened into vanaspati and how new compounds are made.
Combustion
Carbon in all its allotropic forms burns in oxygen to give carbon dioxide, releasing heat and light: C + O₂ → CO₂ + heat and light. Most carbon compounds also burn, releasing a lot of energy. These are oxidation reactions.
Worked example 1: balancing combustion equations
Methane: CH₄ + O₂ → CO₂ + H₂O. Carbon 1 = 1. Hydrogen: 4 on the left, so 2H₂O. Oxygen on the right: 2 + 2 = 4, so 2O₂. Balanced: CH₄ + 2O₂ → CO₂ + 2H₂O.
Ethanol: C₂H₅OH + O₂ → CO₂ + H₂O. Carbon: 2CO₂. Hydrogen: 6, so 3H₂O. Oxygen on the right: 2 × 2 + 3 = 7; ethanol already has 1, so 6 must come from O₂, giving 3O₂. Balanced: C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O. Check O: 1 + 6 = 7 = 4 + 3.
Clean and sooty flames
Clean or sooty flame?
-
Clean blue flame
- Saturated hydrocarbons in enough air
- Complete combustion
- Gas stove with open air holes
-
Yellow sooty flame
- Unsaturated compounds, or any fuel in limited air
- Incomplete combustion leaves unburnt carbon (soot)
- Blackened vessel bottoms mean blocked air holes and wasted fuel
A flame is produced only when gases burn. Charcoal in an angithi often just glows red without a flame, while wood first burns with a flame as its volatile substances vaporise. The yellow glow of a candle flame comes from hot particles of carbon. Coal and petroleum are fossil fuels, formed over millions of years from buried plants and sea organisms. They contain some nitrogen and sulphur, so burning them releases oxides of nitrogen and sulphur, which pollute the air.
Oxidation with oxidising agents
Besides complete oxidation by burning, alcohols can be oxidised to carboxylic acids. Alkaline potassium permanganate (on warming) or acidified potassium dichromate adds oxygen to ethanol and turns it into ethanoic acid:
CH₃CH₂OH → CH₃COOH, using alkaline KMnO₄ + heat or acidified K₂Cr₂O₇ + heat. Substances that add oxygen to others are oxidising agents.
When drops of pink-purple alkaline potassium permanganate are added to warm ethanol, the colour disappears at first because the permanganate is used up oxidising the ethanol. When ethanol has all reacted, extra permanganate stays coloured.
Addition reactions
Unsaturated hydrocarbons add hydrogen in the presence of a catalyst such as nickel or palladium, becoming saturated. A catalyst changes the rate of a reaction without being used up itself. For example, ethene + hydrogen gives ethane: CH₂=CH₂ + H₂ → CH₃–CH₃ (nickel catalyst). This hydrogenation is used to harden vegetable oils. Vegetable oils generally have long unsaturated carbon chains, while animal fats have saturated chains. Animal fats generally contain saturated fatty acids, which are said to be harmful for health, so oils with unsaturated fatty acids are the better choice for cooking.
Substitution reactions
Saturated hydrocarbons are fairly unreactive. In sunlight, however, chlorine reacts quickly with them, replacing hydrogen atoms one by one. One atom taking the place of another is a substitution reaction: CH₄ + Cl₂ → CH₃Cl + HCl (in sunlight). With larger alkanes, several products usually form.
Worked example 2: name the reaction type
- C₂H₄ + H₂ → C₂H₆ with a nickel catalyst: two molecules join into one, the double bond becomes single: addition.
- CH₄ + Cl₂ → CH₃Cl + HCl in sunlight: Cl takes the place of an H: substitution.
- C₂H₅OH → CH₃COOH with acidified K₂Cr₂O₇: oxygen is added: oxidation.
- C₃H₈ + 5O₂ → 3CO₂ + 4H₂O with heat and light: combustion.
Key takeaways: carbon compounds burn to give CO₂, water, heat and light; enough air gives a clean blue flame, too little gives soot. Alkaline KMnO₄ or acidified K₂Cr₂O₇ oxidise ethanol to ethanoic acid. Unsaturated compounds undergo addition (hydrogenation with a nickel catalyst); saturated compounds undergo substitution with chlorine in sunlight.
Check your understanding
-
1. Which is the balanced equation for the complete combustion of methane?
- CH₄ + O₂ → CO₂ + H₂O
- CH₄ + 2O₂ → CO₂ + 2H₂O
- CH₄ + 3O₂ → CO₂ + 2H₂O
- 2CH₄ + O₂ → 2CO₂ + H₂O
Show answer
Answer: B. CH₄ + 2O₂ → CO₂ + 2H₂O: C 1 = 1; H 4 = 2 × 2; O 2 × 2 = 4 = 2 + 2. The others do not have equal atoms on both sides.
-
2. The bottoms of cooking vessels are getting blackened on a gas stove. This shows that:
- The fuel is burning completely
- The gas is saturated
- The air holes are blocked and combustion is incomplete
- The vessel is made of copper
Show answer
Answer: C. Soot (unburnt carbon) forms when there is not enough air. Blocked air holes cause incomplete combustion and waste fuel.
-
3. Which substance can oxidise ethanol to ethanoic acid?
- Alkaline potassium permanganate
- Sodium chloride
- Hydrogen with a nickel catalyst
- Water
Show answer
Answer: A. Alkaline KMnO₄ (or acidified K₂Cr₂O₇) is an oxidising agent that adds oxygen to ethanol, forming ethanoic acid. Hydrogen with nickel does the opposite type of change (addition of hydrogen).
-
4. Hydrogenation of vegetable oils using a nickel catalyst is an example of:
- Substitution reaction
- Combustion
- Saponification
- Addition reaction
Show answer
Answer: D. Hydrogen adds across the double bonds of the unsaturated oil, making it saturated. Adding atoms across a multiple bond is an addition reaction.
-
5. CH₄ + Cl₂ → CH₃Cl + HCl takes place in sunlight. Why is it called a substitution reaction?
- Chlorine adds across a double bond
- A chlorine atom takes the place of a hydrogen atom
- Methane burns in chlorine
- Oxygen is added to methane
Show answer
Answer: B. One hydrogen of methane is replaced by a chlorine atom. Replacing one atom by another is substitution; methane has no double bond for addition.
Sign in to keep track of the lessons you finish.