- Foundation
- About 18 min
- 5 practice questions
Mendel's experiments and the monohybrid cross
Use Mendel's pea-plant experiments to explain dominant and recessive traits, follow a monohybrid cross to the F2 generation with a Punnett square, and explain the 3 : 1 ratio.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why Mendel chose garden pea plants and list contrasting traits he studied.
- Use the terms gene, allele, dominant, recessive, genotype and phenotype correctly.
- Work out a monohybrid cross to the F2 generation and explain the 3 : 1 ratio.
Long before anyone knew about DNA, Gregor Johann Mendel (1822-1884) worked out the basic rules of inheritance. He was schooled in a monastery and studied science and mathematics at the University of Vienna. After failing the examinations for a teaching certificate, he returned to the monastery and began growing garden peas. Other people had crossed peas before him, but Mendel was the first to count how many offspring showed each trait in every generation. Bringing mathematics to the problem is what let him find the rules.
Mendel's method
Mendel chose features of the pea plant that come in two clearly different, contrasting forms: round or wrinkled seeds, tall or short plants, violet or white flowers. He crossed a plant showing one form with a plant showing the other, grew the offspring (the progeny) and worked out what percentage showed each form. Then he let plants self-pollinate and counted again in the next generation.
Words you need
- Gene: a section of DNA that carries the information for one trait.
- Alleles: the different forms of one gene, such as T (tall) and t (dwarf).
- Dominant: the allele whose trait shows even when only one copy is present (written with a capital letter).
- Recessive: the allele whose trait shows only when both copies are of that kind (small letter).
- Genotype: the pair of alleles an organism carries, such as TT, Tt or tt.
- Phenotype: the trait that can be seen, such as tall or dwarf.
- Homozygous (pure): both alleles the same (TT or tt). Heterozygous (hybrid): two different alleles (Tt).
The NCERT chapter itself uses only a few of these words: Mendel's factors (now called genes), the two copies or versions of each gene, and dominant and recessive, with combinations written as TT, Tt and tt. Allele, genotype, phenotype, homozygous and heterozygous are standard shorthand used in this course and in later classes.
Every organism carries two copies of each gene, one from each parent. A dominant allele hides a recessive one; the recessive trait appears only when both copies are recessive.
The monohybrid cross
A cross that follows one pair of contrasting traits is a monohybrid cross. Mendel crossed a pure tall plant (TT) with a pure dwarf plant (tt). Each parent makes reproductive cells (gametes) carrying only one allele: the tall parent gives T, the dwarf parent gives t. Every offspring of this first generation (F1) is therefore Tt, and all of them are tall, because T is dominant. The dwarf trait has not vanished; it is hidden.
Mendel then let the F1 plants self-pollinate. Each Tt plant makes two kinds of gametes, T and t, in equal numbers. A Punnett square shows all the ways they can meet:
| Gametes | T | t |
|---|---|---|
| T | TT (tall) | Tt (tall) |
| t | Tt (tall) | tt (dwarf) |
The four boxes are equally likely. Genotypes: 1 TT : 2 Tt : 1 tt. Phenotypes: TT and Tt are both tall, so 3 tall : 1 dwarf. The dwarf trait, missing in F1, reappears in about one quarter of the F2 plants.
Monohybrid cross from parents to F2
- Parents Pure tall TT × pure dwarf tt
- Gametes T from one parent, t from the other
- F1 All Tt, all tall
- F1 self-pollinated Tt × Tt; gametes T and t from each
- F2 1 TT : 2 Tt : 1 tt, so 3 tall : 1 dwarf
Checking the 1 : 2 : 1 hidden inside the tall plants
In the F2, the tall plants all look alike, yet the model says some are TT and twice as many are Tt. How could you test this? Let every F2 plant self-pollinate and grow its seeds separately. A TT plant can pass on only T, so all its offspring are tall: it breeds true. A Tt plant passes on T or t, so about a quarter of its offspring are short. The short F2 plants (tt) give only short offspring. If the model is right, about one in three tall F2 plants should breed true and two in three should throw some short offspring, which together with the short plants confirms 1 TT : 2 Tt : 1 tt.
Worked example 1: predicting numbers in F2
An F2 generation from a tall × dwarf cross has 1,200 plants. How many are expected to be dwarf, and how many tall plants are pure? Working: the phenotype ratio is 3 tall : 1 dwarf, so 4 parts in all. One part = 1,200 ÷ 4 = 300. Dwarf plants = 1 part = 300. Tall plants = 3 parts = 900. Among genotypes, 1 TT : 2 Tt : 1 tt, so pure tall (TT) = 1 part = 300 and hybrid tall (Tt) = 2 parts = 600. Check: 300 + 600 + 300 = 1,200.
Worked example 2: finding a hidden genotype
A tall pea plant of unknown genotype is crossed with a dwarf plant (tt). Half the offspring are tall and half are dwarf. What was the tall parent? Working: the dwarf parent can give only t. If the tall plant were TT, every offspring would get T and be tall, so there could be no dwarf offspring. Dwarf offspring (tt) must have received a t from the tall parent too. So the tall parent carries both T and t: it is Tt. Check with a Punnett square: Tt × tt gives Tt, Tt, tt, tt, which is 2 tall : 2 dwarf, that is 1 : 1, as observed.
Worked example 3: is one family enough to decide which trait is dominant?
A rabbit with long fur and a rabbit with short fur have a single litter, and every kit has long fur. Can we say long fur is dominant? Not safely. If short fur were dominant but the short-furred parent happened to carry one hidden long-fur copy, some kits could still be long-furred, and in a small litter all of them might be by chance. To decide dominance you need parents known to breed true, many crosses and many offspring. Cross true-breeding long-furred with true-breeding short-furred animals: the form that appears in all the first-generation young is dominant, and it should then show about 3 : 1 when those young are bred with each other.
Going further: why peas, and all seven pairs Mendel studied
The chapter names only three pairs of contrasting traits. These reasons for choosing peas and the full list of seven pairs are not in the current chapter, but they are useful background.
- Pea plants show clear contrasting traits: for example, a plant is either tall or dwarf, with nothing in between.
- Many generations can be grown in a short time, and each plant gives many seeds to count.
- The flowers normally self-pollinate, so pure lines can be kept, but they can also be cross-pollinated by hand when needed.
| Character | Dominant form | Recessive form |
|---|---|---|
| Plant height | Tall | Dwarf |
| Seed shape | Round | Wrinkled |
| Seed colour | Yellow | Green |
| Flower colour | Violet | White |
| Pod shape | Inflated (full) | Constricted |
| Pod colour | Green | Yellow |
| Flower position | Axial (along the stem) | Terminal (at the tip) |
Key takeaways: Mendel was the first to count offspring of each kind in every generation, using pea plants with clear contrasting traits. Each trait is controlled by a gene (Mendel's factor) present in two copies, one from each parent. In a cross of pure tall × pure dwarf, all F1 plants are tall (Tt); F2 shows 3 tall : 1 dwarf, made up of 1 TT : 2 Tt : 1 tt, which self-pollinating the F2 plants can confirm. One copy of a dominant form is enough to show; a recessive form shows only when both copies are recessive, so it can stay hidden for a generation and then reappear. Deciding dominance needs many crosses, not one family.
Check your understanding
-
1. A pure round-seeded pea plant (RR) is crossed with a wrinkled-seeded plant (rr). What will the F1 seeds be like?
- All wrinkled
- Half round and half wrinkled
- All round, with genotype Rr
- Three round to one wrinkled
Show answer
Answer: C. The RR parent can give only R and the rr parent only r, so every F1 seed is Rr. Round is dominant, so all F1 seeds are round.
-
2. In the F2 generation of a monohybrid cross, what is the genotype ratio?
- 3 : 1
- 1 : 2 : 1
- 1 : 1
- 9 : 3 : 3 : 1
Show answer
Answer: B. Tt × Tt gives TT, Tt, Tt and tt in equal chance, so the genotype ratio is 1 TT : 2 Tt : 1 tt. The 3 : 1 ratio is the phenotype ratio, because TT and Tt look the same.
-
3. An F2 generation of a violet × white flower cross has 640 plants. About how many would have white flowers?
- 480
- 320
- 160
- 40
Show answer
Answer: C. Violet is dominant, so the F2 phenotype ratio is 3 violet : 1 white, which is 4 parts. One part = 640 ÷ 4 = 160, so about 160 plants have white flowers (and 480 violet).
-
4. Which experiment would show that the tall plants of an F2 generation include both TT and Tt plants?
- Measure the height of every F2 tall plant with a ruler
- Cross every F2 tall plant with a pure tall plant
- Count the leaves on each F2 tall plant
- Let each F2 tall plant self-pollinate and see which give only tall offspring and which also give some short ones
Show answer
Answer: D. TT and Tt plants look the same, so measuring cannot separate them. Selfed, a TT plant gives only tall offspring, while a Tt plant gives about one short offspring in four. Crossing with a pure tall plant would give all tall offspring from both, so it would not tell them apart.
-
5. Assertion (A): Dwarf plants appear in the F2 generation even though all F1 plants were tall. Reason (R): The F1 plants carried the recessive allele for dwarfness, hidden by the dominant allele.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both statements are true. All F1 plants were Tt: tall because T is dominant, but carrying t. When two Tt plants self-pollinate, a quarter of the offspring receive t from both sides and are dwarf (tt). So R correctly explains A.
Sign in to keep track of the lessons you finish.