• Foundation
  • About 16 min
  • 5 practice questions

Non-ferrous and non-metallic minerals, mining hazards and conservation

Describe copper, bauxite, mica and limestone with their uses and regions, explain the hazards of mining, and give reasons and ways to conserve minerals.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the uses and main sources of copper and bauxite.
  • Explain why mica and limestone are important and where they are found.
  • Explain the hazards of mining and why and how minerals must be conserved.

Non-ferrous minerals contain no iron. They include copper, bauxite, lead, zinc and gold, and play a vital role in metallurgical, engineering and electrical industries. The textbook notes that India's reserves and production of non-ferrous minerals are not very satisfactory.

Copper

India is critically deficient in copper reserves and production. Being malleable, ductile and a good conductor, copper is used mainly in electrical cables, electronics and chemical industries. Leading producers are the Balaghat mines in Madhya Pradesh, the Khetri mines in Rajasthan and the Singhbhum district of Jharkhand.

Bauxite

Several ores contain aluminium, but it is from bauxite, a clay-like substance, that alumina and later aluminium are obtained. Bauxite deposits form by the decomposition of rocks rich in aluminium silicates. Aluminium is important because it combines the strength of metals like iron with extreme lightness, good conductivity and great malleability. India's bauxite deposits are mainly in the Amarkantak plateau, Maikal hills and the Bilaspur-Katni plateau region. According to the textbook, Odisha was the largest bauxite-producing state in 2018-19, and the Panchpatmali deposits in Koraput district are the state's most important.

Non-metallic minerals: mica

Mica is made of a series of plates or leaves and splits easily into very thin sheets. It can be clear, black, green, red, yellow or brown. Its excellent dielectric strength, low power loss, insulating properties and resistance to high voltage make it one of the most indispensable minerals for the electric and electronic industries.

Mica in India
Mica areaState
Koderma-Gaya-Hazaribagh belt (northern edge of the Chota Nagpur plateau), the leading producerJharkhand
Around AjmerRajasthan
Nellore mica beltAndhra Pradesh

Rock minerals: limestone

Limestone occurs with rocks made of calcium carbonate or calcium and magnesium carbonates, in sedimentary rocks of most geological formations. It is the basic raw material for the cement industry and essential for smelting iron ore in the blast furnace.

Classifying the minerals in this chapter

  • Metallic: ferrous
    • Iron ore
    • Manganese
  • Metallic: non-ferrous
    • Copper
    • Bauxite
    • Lead, zinc, gold
  • Non-metallic
    • Mica
  • Rock minerals
    • Limestone

Hazards of mining

  • Dust and noxious fumes inhaled by miners make them vulnerable to pulmonary (lung) diseases.
  • Collapsing mine roofs, flooding and fires in coal mines are a constant threat.
  • Water sources in mining regions get contaminated.
  • Dumping of waste and slurry degrades land and soil and increases stream and river pollution.

Stricter safety rules and the enforcement of environmental laws are essential to stop mining from becoming a 'killer industry'.

Conservation of minerals

According to the textbook, workable mineral deposits make up an insignificant fraction (about one per cent) of the earth's crust. Minerals took millions of years to form and concentrate, and the rate of replenishment is infinitely small compared with today's consumption. So minerals are finite and non-renewable: valuable but short-lived possessions. As extraction continues, ores come from greater depths and are of lower quality, so costs rise.

Minerals conserved: use them in a planned, sustainable way, develop technology to use low-grade ores cheaply, recycle metals, use scrap and find substitutes.

Worked example 1: matching property to use

Why is copper used for electrical cables? Cables must carry current well (good conductor), be drawn into thin wires (ductile) and bend without breaking (malleable). Copper has all three properties. Mica, by contrast, is used in electrical equipment for the opposite reason: it does not conduct electricity and resists high voltage, so it is an insulator.

Worked example 2: explaining rising costs

A mine first extracts rich ore close to the surface. As it goes deeper, each tonne of ore needs more digging, pumping and lifting, and the ore contains less metal. So the cost of every kilogram of metal rises. This is why the textbook links continued extraction with increasing costs and decreasing quality, and why recycling and substitutes matter.

Key takeaways: Copper (Balaghat, Khetri, Singhbhum) is used in cables and electronics; India is short of it. Bauxite (Amarkantak, Maikal hills, Bilaspur-Katni; Panchpatmali in Koraput) gives aluminium, strong yet light. Mica (Koderma-Gaya-Hazaribagh, Ajmer, Nellore) is an insulator for electrical industries. Limestone is the raw material of cement and helps smelt iron. Mining harms miners' health and the environment. Minerals are finite, so plan, recycle, use scrap and substitutes.

Check your understanding

  1. 1. Koderma in Jharkhand is a leading producer of which mineral?

    1. Bauxite
    2. Iron ore
    3. Copper
    4. Mica
    Show answer

    Answer: D. The Koderma-Gaya-Hazaribagh belt of Jharkhand is the leading producer of mica.

  2. 2. Which mineral is the basic raw material for the cement industry?

    1. Limestone
    2. Mica
    3. Bauxite
    4. Manganese
    Show answer

    Answer: A. Limestone is the basic raw material for the cement industry and is also essential for smelting iron ore in the blast furnace.

  3. 3. Which mines are leading producers of copper in India?

    1. Kudremukh and Bailadila
    2. Balaghat, Khetri and Singhbhum
    3. Panchpatmali and Koraput
    4. Digboi and Naharkatiya
    Show answer

    Answer: B. The Balaghat mines (Madhya Pradesh), Khetri mines (Rajasthan) and Singhbhum district (Jharkhand) are leading copper producers.

  4. 4. Why is aluminium an important metal?

    1. It is the heaviest metal
    2. It does not conduct electricity
    3. It combines strength like iron with extreme lightness, good conductivity and great malleability
    4. It is found in placer deposits
    Show answer

    Answer: C. Aluminium combines the strength of metals such as iron with extreme lightness, good conductivity and great malleability.

  5. 5. Assertion (A): Mineral resources must be conserved.
    Reason (R): Minerals are formed so slowly that their rate of replenishment is infinitely small compared with present consumption.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true and R explains A: since minerals cannot be replaced on a human timescale, they are finite and non-renewable, so they must be conserved.

Privacy · Terms · Refunds · Delivery