Revision notes

Chapter 5 Minerals and Energy Resources: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What minerals are and how they occur

Geologists define a mineral as a homogeneous, naturally occurring substance with a definable internal structure.

Modes of occurrence of minerals

  • Veins and lodes
    • In cracks, crevices, faults or joints of igneous and metamorphic rocks
    • Smaller: veins; larger: lodes
    • Molten or gaseous minerals forced upward, cooling as they rise
    • Tin, copper, zinc, lead
  • Beds or layers
    • In sedimentary rocks, deposited in horizontal strata
    • Coal and some iron ore: long periods of heat and pressure
    • Gypsum, potash salt, sodium salt: formed by evaporation in arid regions
  • Residual mass
    • Surface rocks decompose and soluble parts are removed
    • Bauxite forms this way
  • Placer deposits
    • Alluvial deposits in sands of valley floors and the base of hills
    • Minerals not corroded by water: gold, silver, tin, platinum
  • Ocean waters and beds
    • Common salt, magnesium, bromine from ocean water
    • Ocean beds rich in manganese nodules
Where minerals are found
Region or rockMinerals found (as in the textbook)
Peninsular rocksMost reserves of coal, metallic minerals, mica and many non-metallic minerals
Sedimentary rocks on the western and eastern flanks of the peninsula, Gujarat and AssamMost petroleum deposits
Rajasthan (with peninsular rock systems)Reserves of many non-ferrous minerals
Alluvial plains of north IndiaAlmost no economic minerals

Key takeaways: A mineral is a homogeneous, naturally occurring substance with a definable internal structure. Minerals usually occur in ores. They occur in veins and lodes, in beds or layers, as residual mass, as placer deposits, and in ocean waters and beds. Peninsular rocks hold most of India's coal and metallic minerals, while the northern plains have almost none.

Read the full lesson

Lesson 2

Ferrous minerals: iron ore and manganese

Two main iron ores

  • Magnetite
    • Finest iron ore
    • Iron content up to 70 per cent
    • Excellent magnetic qualities, valuable in the electrical industry
  • Hematite
    • Most important industrial ore by quantity used
    • Iron content 50-60 per cent
    • Slightly lower iron content than magnetite
Iron ore belts of India
BeltStatesKey mines and facts (as in the textbook)
Odisha-JharkhandOdisha, JharkhandHigh-grade hematite at Badampahar in Mayurbhanj and Kendujhar districts (Odisha); hematite at Gua and Noamundi in Singbhum district (Jharkhand)
Durg-Bastar-ChandrapurChhattisgarh, MaharashtraVery high-grade hematite in the Bailadila hills, Bastar district: 14 deposits of super high-grade ore with the best properties for steel; exported to Japan and South Korea via Visakhapatnam port
Ballari-Chitradurga-Chikkamagaluru-TumakuruKarnatakaLarge reserves; Kudremukh mines in the Western Ghats are a 100 per cent export unit; ore sent as slurry through a pipeline to a port near Mangaluru
Maharashtra-GoaGoa, Ratnagiri district of MaharashtraOres not of very high quality but efficiently exploited; exported through Marmagao port

About 10 kg of manganese is needed to make one tonne of steel.

From ore to industry

  1. Iron ore mined Magnetite or hematite from the belts.
  2. Combined with manganese and coal Manganese for alloys; coal as fuel.
  3. Steel made The base of metallurgical industries.
  4. Surplus ore exported Through ports such as Visakhapatnam, Mangaluru and Marmagao.

Key takeaways: Ferrous minerals form most of the value of metallic mineral production. Magnetite is the finest ore (up to 70 per cent iron); hematite is the most used (50-60 per cent). The four belts are Odisha-Jharkhand, Durg-Bastar-Chandrapur (Bailadila), Ballari-Chitradurga-Chikkamagaluru-Tumakuru (Kudremukh) and Maharashtra-Goa. About 10 kg of manganese is needed per tonne of steel.

Read the full lesson

Lesson 3

Non-ferrous and non-metallic minerals, mining hazards and conservation

Mica in India
Mica areaState
Koderma-Gaya-Hazaribagh belt (northern edge of the Chota Nagpur plateau), the leading producerJharkhand
Around AjmerRajasthan
Nellore mica beltAndhra Pradesh

Classifying the minerals in this chapter

  • Metallic: ferrous
    • Iron ore
    • Manganese
  • Metallic: non-ferrous
    • Copper
    • Bauxite
    • Lead, zinc, gold
  • Non-metallic
    • Mica
  • Rock minerals
    • Limestone

Minerals conserved: use them in a planned, sustainable way, develop technology to use low-grade ores cheaply, recycle metals, use scrap and find substitutes.

Key takeaways: Copper (Balaghat, Khetri, Singhbhum) is used in cables and electronics; India is short of it. Bauxite (Amarkantak, Maikal hills, Bilaspur-Katni; Panchpatmali in Koraput) gives aluminium, strong yet light. Mica (Koderma-Gaya-Hazaribagh, Ajmer, Nellore) is an insulator for electrical industries. Limestone is the raw material of cement and helps smelt iron. Mining harms miners' health and the environment. Minerals are finite, so plan, recycle, use scrap and substitutes.

Read the full lesson

Lesson 4

Conventional energy: coal, petroleum, natural gas and electricity

Two groups of energy sources

  • Conventional
    • Firewood
    • Cattle dung cake
    • Coal
    • Petroleum
    • Natural gas
    • Electricity (hydel and thermal)
  • Non-conventional
    • Solar
    • Wind
    • Tidal
    • Geothermal
    • Biogas
    • Atomic energy
Types of coal, from lowest to highest grade
TypeFeatures (as in the textbook)
PeatFrom decaying plants in swamps; low carbon, high moisture, low heating capacity
LigniteLow-grade brown coal, soft, high moisture; main reserves at Neyveli (Tamil Nadu), used for electricity
BituminousBuried deep and heated more; the most popular coal in commercial use
Metallurgical coalHigh-grade bituminous coal, specially valuable for smelting iron in blast furnaces
AnthraciteHighest quality hard coal

Coal of two geological ages

  • Gondwana coal
    • A little over 200 million years old
    • Major metallurgical coal
    • Damodar valley (West Bengal-Jharkhand): Jharia, Raniganj, Bokaro
    • Also Godavari, Mahanadi, Son and Wardha valleys
  • Tertiary coal
    • About 55 million years old
    • North-eastern states: Meghalaya, Assam, Arunachal Pradesh, Nagaland
Major petroleum areas
AreaNotes (as in the textbook)
Mumbai HighMajor offshore production area of western India
GujaratAnkleshwar is the most important field
AssamOldest oil-producing state: Digboi, Naharkatiya and Moran-Hugrijan

Key takeaways: Conventional sources include firewood, dung cake, coal, petroleum, natural gas and electricity; non-conventional include solar, wind, tidal, geothermal, biogas and atomic energy. Coal ranges from peat to anthracite; Gondwana coal is in the Damodar valley, tertiary coal in the north-east. Petroleum is trapped in anticlines and fault traps; Mumbai High, Gujarat (Ankleshwar) and Assam (Digboi) produce it. Natural gas comes from Mumbai High, Cambay and Krishna-Godavari basins. Electricity is hydel or thermal.

Read the full lesson

Lesson 5

Non-conventional energy and conserving energy

How a gobar gas plant gives twin benefits

  1. Cattle dung and farm waste fed in Mixed with water in a closed tank.
  2. Organic matter decomposes Without air, it releases gas.
  3. Gas piped to the kitchen A clean, efficient cooking fuel.
  4. Leftover slurry used as manure Better manure than burnt dung.
Non-conventional energy in India
SourceIndian locations named in the textbook
Nuclear fuelsUranium and thorium: Jharkhand, Aravalli ranges of Rajasthan; thorium in monazite sands of Kerala
WindNagarcoil to Madurai (Tamil Nadu); Jaisalmer; also Andhra Pradesh, Karnataka, Gujarat, Kerala, Maharashtra, Lakshadweep
TidalGulf of Khambhat, Gulf of Kuchchh (Gujarat); Sunderbans (West Bengal)
GeothermalParvati valley near Manikaran (Himachal Pradesh); Puga valley (Ladakh)

The twin planks of sustainable energy: promote energy conservation, and increase the use of renewable energy sources. Energy saved is energy produced.

Key takeaways: Dependence on fossil fuels, rising prices and pollution make non-conventional energy necessary. Uranium and thorium come from Jharkhand and the Aravallis; Kerala's monazite sands are rich in thorium. Solar uses photovoltaic cells; the biggest wind cluster runs from Nagarcoil to Madurai; gobar gas gives energy and manure; tidal energy suits the Gulfs of Khambhat and Kuchchh and the Sunderbans; geothermal projects are at Manikaran and Puga. Conservation plus renewables make energy sustainable.

Read the full lesson

Privacy · Terms · Refunds · Delivery