• Foundation
  • About 22 min
  • 5 practice questions

Cardiac cycle, cardiac output and the ECG

Follow the events of one cardiac cycle and the heart sounds, calculate cycle duration and cardiac output, and interpret the P wave, QRS complex and T wave of an ECG.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the sequence of systole and diastole in one cardiac cycle.
  • Link the opening and closing of valves to pressure changes and to the lub and dub sounds.
  • Calculate the duration of a cardiac cycle and the cardiac output.
  • Explain the waves of a standard ECG.

Events of the cardiac cycle

One cardiac cycle

  1. Joint diastole All chambers relaxed; AV valves open, semilunar valves closed; blood flows from veins through atria into ventricles.
  2. Atrial systole SAN fires; both atria contract, increasing flow into the ventricles by about 30%.
  3. Ventricular systole Impulse via AVN, AV bundle and Purkinje fibres; ventricles contract, atria relax; AV valves close.
  4. Ejection Rising pressure opens the semilunar valves; blood enters pulmonary artery and aorta.
  5. Ventricular diastole Ventricles relax; semilunar valves close; AV valves reopen as pressure falls.

Then back to step 1: Joint diastole

The cardiac cycle is the sequence of events in the heart that is repeated cyclically: systole (contraction) and diastole (relaxation) of both atria and ventricles. Note that atrial diastole coincides with ventricular systole.

Heart sounds

The two heart sounds

  • First sound: lub
    • Closure of the tricuspid and bicuspid valves
    • At the start of ventricular systole
  • Second sound: dub
    • Closure of the semilunar valves
    • At the start of ventricular diastole

Both sounds are heard with a stethoscope and are of clinical diagnostic significance.

Cycle duration, stroke volume and cardiac output

Duration of one cardiac cycle = 60 s ÷ heart rate. Cardiac output = stroke volume × heart rate.

Stroke volume is the volume of blood pumped by each ventricle in one cycle, about 70 mL. Cardiac output is the volume pumped by each ventricle per minute and averages about 5000 mL (5 L) in a healthy person. The body can change both stroke volume and heart rate, so cardiac output can rise greatly; an athlete's cardiac output is much higher than an ordinary person's.

Worked example 1: duration of a cycle

At 72 beats per minute, how long does one cycle last? Step 1: one minute = 60 s. Step 2: 60 ÷ 72 ≈ 0.83 s, usually quoted as 0.8 s. At 90 beats per minute during light exercise: 60 ÷ 90 ≈ 0.67 s. Faster heart rate, shorter cycle.

Worked example 2: cardiac output

With a stroke volume of 70 mL and a heart rate of 72 per minute: Cardiac output = 70 × 72 = 5040 mL per minute, about 5 L. If, during exercise, stroke volume rises to 100 mL and heart rate to 150 per minute (illustrative values), cardiac output = 100 × 150 = 15,000 mL = 15 L per minute, three times the resting value.

Electrocardiogram (ECG)

An ECG is a graph of the electrical activity of the heart during a cardiac cycle, recorded by an electrocardiograph. For a standard ECG, three leads are attached: one to each wrist and one to the left ankle. (Detailed tests use multiple leads on the chest.) Each peak is named by a letter from P to T.

Waves of a standard ECG
WaveElectrical eventMechanical result
P waveDepolarisation (excitation) of the atriaContraction of both atria
QRS complexDepolarisation of the ventriclesVentricular contraction starts shortly after Q: beginning of systole
T waveRepolarisation of the ventricles (return to normal)End of the T wave marks the end of systole

Order of waves in one heartbeat

  1. P wave Atria excited.
  2. QRS complex Ventricles excited; systole begins.
  3. T wave Ventricles recover; systole ends.

Counting the QRS complexes in a given time gives the heart rate. ECGs from different people have roughly the same shape for a given lead arrangement, so any deviation can point to an abnormality, which gives the ECG great clinical value.

Worked example 3: heart rate from an ECG

An ECG strip covering 10 seconds shows 12 QRS complexes. What is the heart rate? Step 1: beats per second = 12 ÷ 10 = 1.2. Step 2: beats per minute = 1.2 × 60 = 72. This is the normal average rate.

Key takeaways: the cycle runs joint diastole → atrial systole → ventricular systole (AV valves close: lub; semilunar valves open) → ventricular diastole (semilunar valves close: dub). At 72 beats per minute a cycle lasts about 0.8 s. Cardiac output = stroke volume × heart rate ≈ 70 × 72 ≈ 5 L per minute. In an ECG, P = atrial depolarisation, QRS = ventricular depolarisation, T = ventricular repolarisation.

Check your understanding

  1. 1. The first heart sound 'lub' is produced by the closure of the

    1. semilunar valves
    2. tricuspid and bicuspid valves
    3. aortic and pulmonary valves only
    4. inter-atrial septum
    Show answer

    Answer: B. Lub comes from the closure of the atrio-ventricular (tricuspid and bicuspid) valves at the start of ventricular systole. Dub comes from closure of the semilunar valves.

  2. 2. A person's heart beats 80 times a minute with a stroke volume of 75 mL. What is the cardiac output?

    1. 6000 mL per minute
    2. 5040 mL per minute
    3. 155 mL per minute
    4. 7500 mL per minute
    Show answer

    Answer: A. Cardiac output = stroke volume × heart rate = 75 × 80 = 6000 mL per minute.

  3. 3. In a standard ECG, the QRS complex represents

    1. depolarisation of the atria
    2. repolarisation of the ventricles
    3. depolarisation of the ventricles
    4. closure of the semilunar valves
    Show answer

    Answer: C. The QRS complex records ventricular depolarisation, which initiates ventricular contraction. The P wave is atrial depolarisation and the T wave ventricular repolarisation.

  4. 4. If the heart rate is 60 beats per minute, how long does one cardiac cycle last?

    1. 0.8 s
    2. 0.6 s
    3. 1.2 s
    4. 1.0 s
    Show answer

    Answer: D. Duration = 60 s ÷ heart rate = 60 ÷ 60 = 1.0 s per cycle.

  5. 5. Assertion (A): During ventricular systole the tricuspid and bicuspid valves close.
    Reason (R): The rising pressure in the ventricles pushes blood back towards the atria, shutting these valves.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. As the ventricles contract, the attempted backflow of blood into the atria closes the AV valves, producing the first heart sound. R explains A.

Privacy · Terms · Refunds · Delivery