- Foundation
- About 22 min
- 5 practice questions
Molecular orbital theory and hydrogen bonding
Build molecular orbitals by the LCAO method, write configurations of homonuclear diatomic molecules, calculate bond order and predict magnetic behaviour, and explain intermolecular and intramolecular hydrogen bonds.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the main ideas of molecular orbital (MO) theory and the conditions for atomic orbitals to combine.
- Explain bonding and antibonding orbitals using the LCAO method.
- Write MO configurations of H₂ to Ne₂, using the correct energy order.
- Calculate bond order and predict stability, relative bond length and magnetic behaviour.
- Explain the cause of hydrogen bonding and tell intermolecular from intramolecular hydrogen bonds.
Lewis structures predict that O₂ has all its electrons paired, yet liquid oxygen is attracted into a magnetic field. Molecular orbital theory, developed by F. Hund and R. S. Mulliken, explains this by treating electrons as belonging to the whole molecule rather than to single atoms or bonds.
Main ideas of MO theory
- Electrons in a molecule occupy molecular orbitals (MOs), just as electrons in an atom occupy atomic orbitals.
- Only atomic orbitals of comparable energy and proper symmetry combine to form MOs.
- An atomic orbital is monocentric (one nucleus); an MO is polycentric (influenced by two or more nuclei).
- The number of MOs formed equals the number of atomic orbitals combined: two atomic orbitals give one bonding and one antibonding MO.
- The bonding MO is lower in energy, and so more stable, than the antibonding MO.
- MOs are filled following the aufbau principle, Pauli's exclusion principle and Hund's rule.
Linear combination of atomic orbitals (LCAO)
The Schrödinger equation cannot be solved exactly for systems with more than one electron, so MOs are built approximately by adding and subtracting atomic wave functions. For two atoms A and B: σ = ψA + ψB (bonding) and σ* = ψA − ψB (antibonding). In the bonding MO the electron waves reinforce each other (constructive interference) and electron density builds up between the nuclei, shielding them from each other; its energy is lower than that of either atomic orbital. In the antibonding MO the waves cancel (destructive interference), leaving a nodal plane of zero electron density between the nuclei; its energy is raised. The total energy of the two MOs equals that of the two original atomic orbitals.
Bonding versus antibonding molecular orbitals
-
Bonding MO (σ, π)
- Formed by addition: ψA + ψB
- Constructive interference
- Electron density concentrated between the nuclei
- Lower energy than the atomic orbitals; stabilises the molecule
-
Antibonding MO (σ*, π*)
- Formed by subtraction: ψA − ψB
- Destructive interference
- Nodal plane between the nuclei
- Higher energy than the atomic orbitals; destabilises the molecule
Three conditions must hold for atomic orbitals to combine. (1) Same or nearly the same energy: for two identical atoms, 1s combines with 1s but not with 2s. (2) Same symmetry about the molecular axis, taken as z: 2p_z combines with 2p_z, but not with 2p_x or 2p_y. (3) Maximum overlap. MOs symmetrical about the bond axis are σ type (σ1s, σ*1s, σ2s, σ2p_z and their antibonding partners). MOs from 2p_x and 2p_y have lobes above and below the axis and are π type (π2p_x, π2p_y, π*2p_x, π*2p_y); a π* orbital has a node between the nuclei.
Energy order and filling
| Molecules | Increasing order of MO energies |
|---|---|
| Li₂, Be₂, B₂, C₂, N₂ | σ1s < σ*1s < σ2s < σ*2s < (π2p_x = π2p_y) < σ2p_z < (π*2p_x = π*2p_y) < σ*2p_z |
| O₂, F₂, Ne₂ | σ1s < σ*1s < σ2s < σ*2s < σ2p_z < (π2p_x = π2p_y) < (π*2p_x = π*2p_y) < σ*2p_z |
Bond order = ½ (N_b − N_a), where N_b and N_a are the numbers of electrons in bonding and antibonding MOs. A positive bond order means a stable molecule; zero or negative means it does not exist.
The configuration also tells us more. Bond orders of 1, 2 and 3 correspond to single, double and triple bonds, and bond length decreases as bond order increases. If every MO is doubly occupied the substance is diamagnetic (repelled by a magnetic field); if any MO holds a single electron it is paramagnetic (attracted).
| Molecule | Electrons | Configuration | Bond order | Magnetic nature |
|---|---|---|---|---|
| H₂ | 2 | σ1s² | 1 | diamagnetic |
| He₂ | 4 | σ1s² σ*1s² | 0 | does not exist |
| Li₂ | 6 | KK σ2s² | 1 | diamagnetic |
| Be₂ | 8 | KK σ2s² σ*2s² | 0 | does not exist |
| C₂ | 12 | KK σ2s² σ*2s² π2p_x² π2p_y² | 2 | diamagnetic |
| O₂ | 16 | KK σ2s² σ*2s² σ2p_z² π2p_x² π2p_y² π*2p_x¹ π*2p_y¹ | 2 | paramagnetic |
Two results stand out. In C₂ the double bond is made of two π bonds, since its four highest-energy electrons sit in π orbitals, whereas most double bonds are one σ + one π. In O₂ the last two electrons go singly into π*2p_x and π*2p_y (Hund's rule), so O₂ has two unpaired electrons and is paramagnetic, as experiment shows.
Worked example 1: N₂ and N₂⁺
N₂ has 14 electrons: σ1s² σ*1s² σ2s² σ*2s² (π2p_x² = π2p_y²) σ2p_z². Bonding electrons N_b = 2 + 2 + 4 + 2 = 10; antibonding N_a = 2 + 2 = 4. Bond order = ½(10 − 4) = 3, and all electrons are paired, so N₂ is diamagnetic. N₂⁺ has 13 electrons; the electron removed comes from σ2p_z, so N_b = 9 and N_a = 4. Bond order = ½(9 − 4) = 2.5. N₂⁺ is paramagnetic, with one unpaired electron, and its bond is weaker and longer than in N₂.
Worked example 2: B₂
B₂ has 10 electrons. Using the order for B₂: KK σ2s² σ*2s² π2p_x¹ π2p_y¹; by Hund's rule the last two electrons occupy the two equal π orbitals singly. N_b = 2 (σ1s) + 2 (σ2s) + 2 (π) = 6; N_a = 2 (σ*1s) + 2 (σ*2s) = 4. Bond order = ½(6 − 4) = 1. B₂ has two unpaired electrons, so it is paramagnetic. If σ2p_z lay below the π orbitals, both electrons would pair in σ2p_z and B₂ would be diamagnetic; the observed paramagnetism supports the order used.
Hydrogen bonding
When hydrogen is covalently bonded to a highly electronegative atom X (F, O or N), the shared pair is pulled far towards X. Hydrogen becomes strongly δ+ and X becomes δ−. The δ+ hydrogen is then attracted to an electronegative atom of another molecule (or another part of the same molecule). This attraction is the hydrogen bond. It is much weaker than a covalent bond and is drawn as a dotted line: H(δ+)–F(δ−) ··· H(δ+)–F(δ−) ··· H(δ+)–F(δ−). Hydrogen bonding is strongest in the solid state and weakest in the gas, and it strongly affects the structures and properties of compounds.
Types of hydrogen bond
-
Intermolecular
- Between two molecules of the same or different compounds
- Examples: HF, water, alcohols
- Links molecules into chains or networks
-
Intramolecular
- Within one molecule
- H lies between two electronegative atoms of the same molecule
- Example: o-nitrophenol (H of –OH bonded to an O of –NO₂)
Worked example 3: o-nitrophenol and p-nitrophenol
In o-nitrophenol the –OH and –NO₂ groups are on neighbouring carbon atoms, so the H of –OH can reach an O atom of –NO₂ in the same molecule and form an intramolecular hydrogen bond, closing a ring. In p-nitrophenol the two groups are on opposite sides of the ring, too far apart, so the –OH hydrogen bonds to –NO₂ groups of neighbouring molecules instead. These intermolecular hydrogen bonds hold the para molecules together, so p-nitrophenol is the less volatile of the two.
Key takeaways
- LCAO: ψA + ψB gives a bonding MO (lower energy), ψA − ψB an antibonding MO (higher energy, with a node).
- Orbitals combine only if they have similar energy, the same symmetry about the axis, and good overlap.
- σ2p_z lies above π2p for Li₂ to N₂ and below π2p for O₂ to Ne₂.
- Bond order = ½(N_b − N_a); unpaired electrons mean paramagnetism (O₂, B₂).
- Hydrogen bonds form with H bonded to F, O or N; they may be intermolecular or intramolecular.
Check your understanding
-
1. What is the bond order of the He₂⁺ ion?
- 0
- 0.5
- 1
- 1.5
Show answer
Answer: B. He₂⁺ has 2 + 2 − 1 = 3 electrons: σ1s² σ*1s¹. Bond order = ½(2 − 1) = 0.5. Being positive, it means He₂⁺ can exist, though its bond is weak.
-
2. Which of these molecules is paramagnetic?
- N₂
- C₂
- Li₂
- B₂
Show answer
Answer: D. B₂ (10 electrons) ends with π2p_x¹ π2p_y¹, giving two unpaired electrons, so it is paramagnetic. N₂ (bond order 3), C₂ (π2p_x² π2p_y²) and Li₂ (σ2s²) have all their electrons paired.
-
3. What is the bond order of F₂⁺?
- 1.5
- 1
- 0.5
- 2
Show answer
Answer: A. F₂ has 18 electrons with N_b = 10 and N_a = 8, so bond order 1. Removing one electron from a π* orbital gives F₂⁺ with N_b = 10 and N_a = 7. Bond order = ½(10 − 7) = 1.5.
-
4. Assertion (A): The O₂ molecule is paramagnetic. Reason (R): All the electrons in the molecular orbitals of O₂ are paired.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: C. A is true: O₂ is attracted by a magnetic field. R is false: the last two electrons occupy π*2p_x and π*2p_y singly (Hund's rule), so O₂ has two unpaired electrons. That is why it is paramagnetic.
-
5. In which substance are molecules held to one another by hydrogen bonds?
- CH₄
- CCl₄
- HF
- H₂
Show answer
Answer: C. Hydrogen bonding needs H attached to F, O or N. In HF the strongly δ+ hydrogen of one molecule is attracted to the F of the next. CH₄ and H₂ have no F, O or N, and CCl₄ has no hydrogen at all.
Sign in to keep track of the lessons you finish.