Revision notes

Chapter 4 Chemical Bonding and Molecular Structure: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Lewis structures, the octet rule and formal charge

Lewis symbols of the second-period elements
ElementValence electrons (dots)Group valence
Li11
Be22
B33
C44
N58 − 5 = 3
O68 − 6 = 2
F78 − 7 = 1
Ne80

Octet rule: atoms combine by transferring or sharing valence electrons so that each atom ends up with eight electrons in its outermost shell (hydrogen ends up with two, like helium).

Two routes to a stable outer shell

  • Electron transfer (Kössel)
    • Metal atom loses electrons and becomes a cation
    • Non-metal atom gains electrons and becomes an anion
    • Ions held together by electrostatic attraction
    • Gives an ionic (electrovalent) bond, e.g. Mg²⁺O²⁻
  • Electron sharing (Lewis–Langmuir)
    • Each atom gives one electron to each shared pair
    • A shared pair counts towards both atoms' octets
    • One, two or three shared pairs: single, double or triple bond
    • Gives a covalent bond, e.g. Cl–Cl, O=C=O, N≡N

Formal charge = (valence electrons of the free atom) − (lone-pair electrons on the atom) − ½ (shared electrons around the atom)

Formal charges in two Lewis structures of CO₂
AtomStructure I: O=C=OStructure II: O≡C–O
Left O6 − 4 − 2 = 06 − 2 − 3 = +1
C4 − 0 − 4 = 04 − 0 − 4 = 0
Right O6 − 4 − 2 = 06 − 6 − 1 = −1
ExceptionWhat happensExamples
Incomplete octetThe central atom has fewer than four valence electrons and ends up with fewer than eight around itLiCl, BeH₂, BCl₃, BF₃, AlCl₃ (B in BF₃ has only 6)
Odd-electron moleculeAn odd total number of electrons means at least one atom cannot have an octetNO (11 valence electrons), NO₂ (17)
Expanded octetAtoms of period 3 and beyond can use d orbitals and hold more than eight electronsPF₅ (10 around P), SF₆ (12 around S), H₂SO₄
  • Atoms bond to lower their energy; ions form by electron transfer, covalent bonds by sharing electron pairs.
  • Group valence = number of dots in the Lewis symbol, or 8 minus that number.
  • Count electrons first (adjusting for charge), then build the skeleton, single bonds, lone pairs and, if needed, multiple bonds.
  • Formal charge = V − L − ½S; the best structure has the smallest formal charges, and formal charges add up to the overall charge.
  • Incomplete octets, odd-electron molecules and expanded octets are the three exceptions to the octet rule.
Read the full lesson

Lesson 2

Ionic bonds, lattice enthalpy, bond parameters and resonance

Lattice enthalpy of an ionic solid: the energy required to separate one mole of the solid completely into its gaseous ions. For NaCl it is 788 kJ mol⁻¹.

Energy changes in forming NaCl(s) from gaseous atoms

  1. Na(g) + Cl(g) Starting point: separate gaseous atoms.
  2. Na⁺(g) + Cl(g) Ionise sodium: +495.8 kJ mol⁻¹ absorbed.
  3. Na⁺(g) + Cl⁻(g) Chlorine gains an electron: 348.7 kJ mol⁻¹ released.
  4. NaCl(s) Ions form the lattice: 788 kJ mol⁻¹ released. Net change −640.9 kJ mol⁻¹.
Higher bond order goes with a shorter, stronger bond
MoleculeBond orderBond length (pm)Bond enthalpy (kJ mol⁻¹)
H₂174435.8
F₂1144155
O₂2121498
N₂3109946

As bond order increases, bond enthalpy increases and bond length decreases.

  • Ionic bonds favour low ionisation enthalpy, large negative electron gain enthalpy and high lattice enthalpy.
  • For NaCl: +495.8 − 348.7 − 788 = −640.9 kJ mol⁻¹; the lattice enthalpy makes the compound stable.
  • Bond length = sum of covalent radii; mean bond enthalpy = total ÷ number of bonds.
  • Higher bond order means a shorter, stronger bond; isoelectronic species share a bond order.
  • A resonance hybrid is a single real structure, lower in energy than any canonical form; average bond order = total bonds ÷ positions.
Read the full lesson

Lesson 3

Bond polarity, dipole moment and VSEPR shapes

Dipole moment: μ = charge (Q) × distance between the centres of positive and negative charge (r). Unit: debye (D), where 1 D = 3.33564 × 10⁻³⁰ C m.

Dipole moments of some molecules
MoleculeDipole moment (D)Geometry
HF1.78linear
HCl1.07linear
H₂O1.85bent
CO₂0linear
NH₃1.47trigonal pyramidal
NF₃0.23trigonal pyramidal
BF₃0trigonal planar
CHCl₃1.04tetrahedral
CCl₄0tetrahedral

Repulsion order: lone pair–lone pair > lone pair–bond pair > bond pair–bond pair. A lone pair is held by only one nucleus, so it spreads out more and squeezes the bond angles.

Predicting a shape with VSEPR

  1. Count electron pairs (valence electrons of central atom + one per H or halogen attached − positive charge + negative charge) ÷ 2
  2. Split the pairs Bond pairs = number of atoms attached; the rest are lone pairs.
  3. Arrange all pairs 2 linear, 3 trigonal planar, 4 tetrahedral, 5 trigonal bipyramidal, 6 octahedral.
  4. Name the shape Describe the positions of the atoms only, then adjust angles for lone-pair repulsion.
The pair-counting shortcut works when the outer atoms are H or halogens.
Shapes from VSEPR (A = central atom, B = bonded atom, E = lone pair)
TypeBond pairs + lone pairsShapeExample
AB₂2 + 0linear, 180°BeCl₂
AB₃3 + 0trigonal planar, 120°BF₃
AB₄4 + 0tetrahedral, 109.5°CH₄
AB₅5 + 0trigonal bipyramidal, 120° and 90°PCl₅
AB₆6 + 0octahedral, 90°SF₆
AB₂E2 + 1bent, about 119.5°SO₂
AB₃E3 + 1trigonal pyramidal, 107°NH₃
AB₂E₂2 + 2bent, 104.5°H₂O
AB₄E4 + 1see-sawSF₄
AB₃E₂3 + 2T-shapedClF₃
AB₅E5 + 1square pyramidalBrF₅
AB₄E₂4 + 2square planarXeF₄
SpeciesPair countBond + lone pairsShape
H₃O⁺(6 + 3 − 1) ÷ 2 = 43 + 1trigonal pyramidal
ClF₃(7 + 3) ÷ 2 = 53 + 2T-shaped (both lone pairs equatorial)
XeF₄(8 + 4) ÷ 2 = 64 + 2square planar (lone pairs opposite each other)
  • μ = Q × r; 1 D = 3.33564 × 10⁻³⁰ C m; a molecule's dipole is the vector sum of its bond dipoles.
  • Symmetrical shapes (linear AB₂, trigonal planar AB₃, tetrahedral AB₄) give zero dipole moment.
  • NH₃ (1.47 D) is more polar than NF₃ (0.23 D) because of the direction of the lone pair's dipole.
  • Small, highly charged cations and large anions give more covalent character (Fajans).
  • VSEPR: count pairs, arrange them, then name the shape from the atoms; lp–lp > lp–bp > bp–bp.
Read the full lesson

Lesson 4

Valence bond theory, orbital overlap and hybridisation

Energy as two H atoms approach

  1. Far apart No interaction; energy taken as zero.
  2. Approaching New attractions exceed new repulsions; energy falls.
  3. 74 pm apart Energy minimum: bond formed, 435.8 kJ mol⁻¹ released.
  4. Closer still Nuclear repulsion dominates; energy rises steeply.

Two kinds of covalent bond

  • Sigma (σ) bond
    • Head-on (axial) overlap along the internuclear axis
    • Formed by s–s, s–p or p–p (end-on) overlap
    • Overlap is large, so the bond is stronger
    • Every single bond is a σ bond
  • Pi (π) bond
    • Sidewise overlap of parallel p orbitals
    • Orbital axes perpendicular to the internuclear axis
    • Electron cloud above and below the plane of the atoms
    • Smaller overlap, so weaker; forms only alongside a σ bond

Steric number of an atom = σ bonds + lone pairs on it. 2 → sp (180°), 3 → sp² (120°), 4 → sp³ (109.5°), 5 → sp³d (120° and 90°), 6 → sp³d² (90°).

HybridisationOrbitals mixedGeometrys-characterExample
spone s + one plinear, 180°50%BeCl₂
sp²one s + two ptrigonal planar, 120°33.3%BCl₃
sp³one s + three ptetrahedral, 109.5°25%CH₄
sp³done s + three p + one dtrigonal bipyramidal20%PCl₅
sp³d²one s + three p + two doctahedralabout 16.7%SF₆
  • A covalent bond forms at the energy minimum, where orbitals overlap and electrons of opposite spin pair (H₂: 74 pm, 435.8 kJ mol⁻¹).
  • σ = head-on overlap (stronger); π = sidewise overlap (weaker, only alongside σ).
  • Hybridisation mixes valence orbitals of nearly equal energy into equivalent orbitals that set the geometry.
  • Steric number 2, 3, 4, 5, 6 → sp, sp², sp³, sp³d, sp³d².
  • In PCl₅ the axial bonds are longer and weaker than the equatorial bonds.
Read the full lesson

Lesson 5

Molecular orbital theory and hydrogen bonding

Bonding versus antibonding molecular orbitals

  • Bonding MO (σ, π)
    • Formed by addition: ψA + ψB
    • Constructive interference
    • Electron density concentrated between the nuclei
    • Lower energy than the atomic orbitals; stabilises the molecule
  • Antibonding MO (σ*, π*)
    • Formed by subtraction: ψA − ψB
    • Destructive interference
    • Nodal plane between the nuclei
    • Higher energy than the atomic orbitals; destabilises the molecule
The two orders differ only in where σ2p_z sits
MoleculesIncreasing order of MO energies
Li₂, Be₂, B₂, C₂, N₂σ1s < σ*1s < σ2s < σ*2s < (π2p_x = π2p_y) < σ2p_z < (π*2p_x = π*2p_y) < σ*2p_z
O₂, F₂, Ne₂σ1s < σ*1s < σ2s < σ*2s < σ2p_z < (π2p_x = π2p_y) < (π*2p_x = π*2p_y) < σ*2p_z

Bond order = ½ (N_b − N_a), where N_b and N_a are the numbers of electrons in bonding and antibonding MOs. A positive bond order means a stable molecule; zero or negative means it does not exist.

KK stands for the filled σ1s² σ*1s²
MoleculeElectronsConfigurationBond orderMagnetic nature
H₂2σ1s²1diamagnetic
He₂4σ1s² σ*1s²0does not exist
Li₂6KK σ2s²1diamagnetic
Be₂8KK σ2s² σ*2s²0does not exist
C₂12KK σ2s² σ*2s² π2p_x² π2p_y²2diamagnetic
O₂16KK σ2s² σ*2s² σ2p_z² π2p_x² π2p_y² π*2p_x¹ π*2p_y¹2paramagnetic

Types of hydrogen bond

  • Intermolecular
    • Between two molecules of the same or different compounds
    • Examples: HF, water, alcohols
    • Links molecules into chains or networks
  • Intramolecular
    • Within one molecule
    • H lies between two electronegative atoms of the same molecule
    • Example: o-nitrophenol (H of –OH bonded to an O of –NO₂)
  • LCAO: ψA + ψB gives a bonding MO (lower energy), ψA − ψB an antibonding MO (higher energy, with a node).
  • Orbitals combine only if they have similar energy, the same symmetry about the axis, and good overlap.
  • σ2p_z lies above π2p for Li₂ to N₂ and below π2p for O₂ to Ne₂.
  • Bond order = ½(N_b − N_a); unpaired electrons mean paramagnetism (O₂, B₂).
  • Hydrogen bonds form with H bonded to F, O or N; they may be intermolecular or intramolecular.
Read the full lesson

Privacy · Terms · Refunds · Delivery