• Foundation
  • About 16 min
  • 5 practice questions

The parts of a good statistical table

Name and explain the parts of a table (number, title, captions, stubs, body, unit, source, note) and build a complete two-way table from made-up data.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the eight parts of a good statistical table.
  • Explain the purpose of each part.
  • Construct a complete two-way table and check its totals.

A table is more than figures in boxes. A good statistical table has standard parts which, put together systematically, make the data clear to any reader. Tabulation can be one-way, two-way or three-way, depending on the number of characteristics used to classify the data.

The parts of a table

Parts of a good statistical table
PartWhat it isWhere it goes
Table numberIdentifies the table; numbers like 4.5 mean the fifth table of the fourth chapterAt the top, before or above the title
TitleClear, brief, carefully worded description of the contentsAt the head, after or below the table number
Captions (column headings)Explain the figures in each columnAt the top of each column
Stubs (row headings)Designations of the rows; the whole left column is the stub columnAt the left of each row
BodyThe actual data; each figure fixed by its row and columnThe main part of the table
Unit of measurementStates the unit of the figures; if rounded, howWith the title, or with stubs or captions if units differ
SourceWhere the data came from; all sources if more than oneUsually at the bottom
NoteExplains any feature of the data not self-explanatoryThe last part, at the bottom

Reading a table from top to bottom

  1. Table number Identify the table
  2. Title and unit What the table shows and in what unit
  3. Captions and stubs What each column and row means
  4. Body The figures themselves
  5. Source and note Where the data came from; special features

A good table has a number, a title, captions, stubs, a body, a unit of measurement, a source and a note; the unit must always be stated, and large figures should be rounded with the method of rounding mentioned.

Worked example 1: building a two-way table

Illustrative text: 'In a made-up district, the number of workers (in thousand) was 46 rural men, 22 urban men, 18 rural women and 6 urban women.' Prepare a complete table.

Table 1.1 Workers by gender and location in a made-up district (thousand). Source: illustrative data. Note: figures rounded to the nearest thousand.
GenderRuralUrbanTotal
Male462268
Female18624
Total642892

Working: row totals: 46 + 22 = 68 men; 18 + 6 = 24 women. Column totals: 46 + 18 = 64 rural; 22 + 6 = 28 urban. Grand total: 68 + 24 = 92 and 64 + 28 = 92, which agree. Naming the parts: 'Table 1.1' is the table number; 'Workers by gender and location in a made-up district' is the title; '(thousand)' is the unit; 'Rural', 'Urban', 'Total' are captions; 'Male', 'Female', 'Total' are stubs; the nine figures are the body; the source and note follow. This is a two-way table because two characteristics (gender and location) classify the data.

Worked example 2: reading and deriving from the table

Share of women among rural workers: 18 ÷ 64 × 100 = 28.125, about 28.1 per cent. Share of women among urban workers: 6 ÷ 28 × 100 ≈ 21.4 per cent. Share of all workers who are urban: 28 ÷ 92 × 100 ≈ 30.4 per cent. Interpretation: most workers in this made-up district are rural, and women form a larger share of the rural workforce than of the urban workforce. A table that also gave non-workers would let us compare work participation directly; adding a third characteristic (such as main and marginal workers) would make it a three-way table.

Worked example 3: rounding figures for a table

Illustrative: populations of three made-up towns are 1,48,672; 2,03,415 and 96,250. To present them in thousands rounded to the nearest thousand: 1,48,672 → 149; 2,03,415 → 203; 96,250 → 96. Total of rounded figures: 149 + 203 + 96 = 448 thousand. Exact total: 1,48,672 + 2,03,415 + 96,250 = 4,48,337, which rounds to 448 thousand, so the rounded total agrees here. A note under the table should say 'Figures rounded to the nearest thousand', because rounded figures do not always add up exactly to the rounded total.

Textual and tabular presentation

  • Textual
    • Data inside sentences
    • Good for small data
    • Can emphasise points
    • Whole text must be read
  • Tabular
    • Data in rows and columns
    • Handles large data for one or more variables
    • Easy to compare and total
    • Organises data for further analysis

Key takeaways: a good table has a table number, title, captions, stubs, body, unit of measurement, source and note. Captions head columns and stubs head rows; the body holds the data. Always state units, mention rounding, and check that row and column totals agree. Tables may be one-way, two-way or three-way.

Check your understanding

  1. 1. The headings of the rows of a table are called:

    1. captions
    2. stubs
    3. notes
    4. the body
    Show answer

    Answer: B. Row headings are called stubs (and the whole left column is the stub column). Column headings are captions.

  2. 2. Table 7.3 in a book should be read as:

    1. the seventh table of the third chapter
    2. a table with 7 rows and 3 columns
    3. the third table of the seventh chapter
    4. the seventy-third table
    Show answer

    Answer: C. In subscripted numbering, the first number is the chapter and the second is the position of the table in that chapter: the third table of chapter 7.

  3. 3. Which part of a table explains a feature of the data that is not self-explanatory?

    1. Note
    2. Source
    3. Caption
    4. Stub
    Show answer

    Answer: A. The note, the last part of a table, explains features of the data not explained elsewhere. The source states where the data came from.

  4. 4. Illustrative: a two-way table has row totals 45 and 55, and column totals 38 and x. What is x?

    1. 38
    2. 45
    3. 100
    4. 62
    Show answer

    Answer: D. The grand total from rows is 45 + 55 = 100. Column totals must also add up to 100, so x = 100 − 38 = 62.

  5. 5. Assertion (A): The unit of measurement should always be stated in a table. Reason (R): Without the unit, a reader cannot tell whether a figure such as 25 means 25 rupees, 25 lakh rupees or 25 per cent.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true, and R explains A: the same figure means very different things in different units, so stating the unit is essential to read the table correctly.

Privacy · Terms · Refunds · Delivery