- Foundation
- About 20 min
- 5 practice questions
Mode of a continuous series, relative position of averages and choosing an average
Calculate the mode of a continuous series (including from a cumulative table), compare the mean, median and mode, and choose the most suitable average for a purpose.
If something looks wrong, please tell us.
By the end of this lesson you can
- Apply the mode formula to a continuous series.
- Convert a cumulative frequency table into a simple frequency table to find the modal class.
- State the relative position of the mean, median and mode, and choose a suitable average.
For grouped data, the mode is estimated inside the class with the largest frequency, the modal class, using the frequencies of its neighbours.
Mode = L + (D1 ÷ (D1 + D2)) × h, where L = lower limit of the modal class, D1 = frequency of the modal class minus that of the class before it, D2 = frequency of the modal class minus that of the class after it (signs ignored), h = class width.
To use this formula the class intervals should be equal and the series exclusive. If only mid-points are given, the class intervals must first be worked out; inclusive classes must first be made exclusive.
Worked example 1: mode of a continuous series
| Marks | Number of students (f) | Mid-value (m) | fm | d' = (m − 35) ÷ 10 | fd' | Cumulative frequency |
|---|---|---|---|---|---|---|
| 0-10 | 4 | 5 | 20 | −3 | −12 | 4 |
| 10-20 | 8 | 15 | 120 | −2 | −16 | 12 |
| 20-30 | 14 | 25 | 350 | −1 | −14 | 26 |
| 30-40 | 12 | 35 | 420 | 0 | 0 | 38 |
| 40-50 | 7 | 45 | 315 | 1 | 7 | 45 |
| 50-60 | 5 | 55 | 275 | 2 | 10 | 50 |
| Total | 50 | 1,500 | −25 |
Step 1: the largest frequency is 14, so the modal class is 20-30. Step 2: L = 20; D1 = 14 − 8 = 6; D2 = 14 − 12 = 2; h = 10. Step 3: Mode = 20 + (6 ÷ (6 + 2)) × 10 = 20 + 0.75 × 10 = 20 + 7.5 = 27.5 marks. Check: 27.5 lies inside the modal class, and nearer to the 30 end because the class after (12) is more crowded than the class before (8).
Worked example 2: mode from a cumulative table
Illustrative 'less than' cumulative distribution of daily earnings (₹ hundred) of 60 made-up workers: less than 10: 5; less than 20: 17; less than 30: 37; less than 40: 52; less than 50: 60. Step 1, convert to simple frequencies by subtracting each cumulative figure from the next:
| Earnings (₹ hundred) | Cumulative frequency | Frequency |
|---|---|---|
| 0-10 | 5 | 5 |
| 10-20 | 17 | 17 − 5 = 12 |
| 20-30 | 37 | 37 − 17 = 20 |
| 30-40 | 52 | 52 − 37 = 15 |
| 40-50 | 60 | 60 − 52 = 8 |
Step 2: the modal class is 20-30 (frequency 20). L = 20, D1 = 20 − 12 = 8, D2 = 20 − 15 = 5, h = 10. Step 3: Mode = 20 + (8 ÷ 13) × 10 = 20 + 6.15 = ₹26.15 hundred (about ₹2,615). Check: 5 + 12 + 20 + 15 + 8 = 60.
The mode can also be located graphically from a histogram, as you saw in the previous chapter.
Relative position of mean, median and mode
Write the arithmetic mean as Me, the median as Mi and the mode as Mo. In a distribution, their relative size is either Me > Mi > Mo or Me < Mi < Mo: the suffixes are in alphabetical order, and the median always lies between the mean and the mode.
Worked example 3: all three averages together
| Average | Value for the 50 students' marks | Where found |
|---|---|---|
| Mean (Me) | 30 | Lesson 2 |
| Median (Mi) | 29.29 | Lesson 3 |
| Mode (Mo) | 27.5 | This lesson |
Here 30 > 29.29 > 27.5, so Me > Mi > Mo, with the median between the other two, as expected. The mean is the largest because the higher classes (40-60) pull it up more than they affect the median or the mode.
Choosing an average
Mean, median and mode compared
-
Arithmetic mean
- Simple to calculate
- Based on all observations
- Unduly affected by extreme values
- Needs complete data
-
Median
- Positional average
- Not affected by extreme values
- Can be found for open-ended classes
- Can be found graphically (ogives)
-
Mode
- Most typical value
- Suits qualitative data such as preferred brand or size
- Can be found for open-ended classes
- May not be unique or may not exist
| Purpose (illustrative) | Suitable average | Reason |
|---|---|---|
| Size of readymade shirts to stock | Mode | The size most people buy |
| Average production per shift in a factory | Mean | All shifts' output counts |
| Typical income in a town with a few very rich families | Median | Not distorted by extreme incomes |
| Average intelligence of students (ranked, not measured) | Median | Positional; works with ranks |
| Data with an open-ended last class ('400 and above') | Median or mode | Need no value for the open class |
Key takeaways: for a continuous series, Mode = L + (D1 ÷ (D1 + D2)) × h, with equal, exclusive classes; a cumulative table must first be turned into simple frequencies. The median lies between the mean and the mode (Me > Mi > Mo or Me < Mi < Mo). Choose the mean for full use of data, the median when extreme values or open classes are present, and the mode for the most typical or qualitative value.
Check your understanding
-
1. Illustrative: the modal class is 40-50 with frequency 30; the classes before and after have frequencies 18 and 22. The mode is:
- 46
- 44
- 45
- 48
Show answer
Answer: A. D1 = 30 − 18 = 12; D2 = 30 − 22 = 8. Mode = 40 + (12 ÷ 20) × 10 = 40 + 6 = 46.
-
2. Illustrative: 'less than' cumulative frequencies are 6, 20, 41 and 50 for the classes 0-5, 5-10, 10-15 and 15-20. The modal class is:
- 0-5
- 15-20
- 5-10
- 10-15
Show answer
Answer: D. Simple frequencies: 6, 20 − 6 = 14, 41 − 20 = 21, 50 − 41 = 9. The largest is 21, so the modal class is 10-15. (41 is a cumulative figure, not a frequency.)
-
3. If the mean of a distribution is 52 and the mode is 46, the median is most likely:
- 58
- 49
- 44
- 52
Show answer
Answer: B. The median always lies between the mean and the mode, so it must be between 46 and 52. Of the options only 49 satisfies this.
-
4. The most suitable average for finding the most popular size of shoes is the:
- arithmetic mean
- median
- mode
- weighted mean
Show answer
Answer: C. A manufacturer wants the size in greatest demand, which is the most frequently occurring value: the mode.
-
5. Assertion (A): The median is preferred to the mean for a distribution with an open-ended class such as 'above ₹1 lakh'. Reason (R): The mean needs the mid-value of every class, which an open-ended class does not have.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true, and R explains A: the mean cannot be calculated without a mid-value for the open class, while the median needs only the position of the middle item.
Sign in to keep track of the lessons you finish.