• Foundation
  • About 20 min
  • 5 practice questions

Issues in constructing index numbers and their uses

Explain the issues to settle when constructing an index number, and use index numbers to measure inflation, purchasing power of money, real wages and needed salary adjustments.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the issues in constructing an index number, including the choice of base year.
  • Calculate an inflation rate from successive index values.
  • Calculate the purchasing power of money, the real wage and the salary needed to maintain a standard of living.

An index number is only as good as the decisions behind it. The chapter lists several issues to settle before constructing one, and then shows how index numbers are used in economic policy.

Issues in constructing an index number

  1. Purpose: be clear what the index is for; a volume index is inappropriate when a value index is needed.
  2. Selection of items: items are not equally important to different consumer groups, so they must be chosen to be as representative as possible of the group the index describes.
  3. Base year: it should be as normal as possible (not a year of extreme values such as a drought or a boom) and not too far in the past, since many items in an old basket disappear. So base years are routinely updated.
  4. Choice of formula: depends on the question; for example, Laspeyres and Paasche differ only in their weights.
  5. Reliability of data: unreliable data give misleading results; use the most reliable sources.

Issues in constructing an index number

  • Purpose Price, quantity or value index?
  • Items Representative of the group
  • Base year Normal and recent
    • No extreme years
    • Updated routinely
  • Formula Suited to the question
    • Laspeyres or Paasche, aggregate or relatives
  • Data Reliable sources

Uses of index numbers in economics

  • CPI (cost of living indices): wage negotiation, income policy, price policy, rent control, taxation and general economic policy.
  • WPI: removes the effect of price changes from aggregates such as national income and capital formation, and is widely used to measure inflation.
  • IIP: gives a quantitative figure for the change in industrial production; an agricultural production index does the same for farming.
  • Sensex: a guide for investors in the stock market.

Inflation is a general and continuing increase in prices. If it becomes large, money can lose its functions as a medium of exchange and unit of account; its primary effect is to lower the value of money.

Inflation rate (week t) = (Xt − Xt−1) ÷ Xt−1 × 100, where Xt is the index in week t. Purchasing power of money = 1 ÷ cost of living index (index as a ratio to 100). Real wage = (money wage ÷ cost of living index) × 100.

Worked example 1: inflation rate

Illustrative: a made-up WPI was 150.0 last week and 151.5 this week. Inflation rate = (151.5 − 150.0) ÷ 150.0 × 100 = 1.5 ÷ 150 × 100 = 1 per cent for the week.

Worked example 2: purchasing power and real wage

Illustrative: a made-up cost of living index (base = 100) is 250. Purchasing power of a rupee = 100 ÷ 250 = ₹0.40: a rupee today buys what 40 paise bought in the base period. Real wage of a worker earning ₹20,000 a month = 20,000 × 100 ÷ 250 = ₹8,000 at base-period prices. Check: 8,000 × 250 ÷ 100 = 20,000.

Worked example 3: the salary needed to stay as well off

Illustrative: the same worker earned ₹6,000 in the base period. To maintain that standard of living when the index is 250, he needs 6,000 × 250 ÷ 100 = ₹15,000. If his current salary is ₹12,000, it falls short by 15,000 − 12,000 = ₹3,000, so he is worse off than in the base period even though his money salary has doubled. Same result via real wage: 12,000 × 100 ÷ 250 = ₹4,800, which is below his base salary of ₹6,000.

Measure (illustrative, index = 250)CalculationResult
Purchasing power of ₹1100 ÷ 250₹0.40
Real value of ₹20,00020,000 × 100 ÷ 250₹8,000
Salary needed to match ₹6,000 base salary6,000 × 250 ÷ 100₹15,000
Real value of ₹12,00012,000 × 100 ÷ 250₹4,800

Worked example 4: choosing a good base year

A made-up state wants a farm price index. Year 1 had a severe drought (prices very high), Year 2 was normal, and Year 3 had a record harvest (prices very low). Year 2 is the best base, since a base should be as normal as possible. A drought year as base would make later prices look artificially low, and a bumper year would make them look artificially high. And a base 40 years old would be poor too, because many items in that old basket are no longer bought.

From index number to policy

  1. Collect prices or quantities Reliable sources
  2. Construct the index Base = 100, chosen formula
  3. Measure change Inflation, cost of living, output
  4. Adjust and decide Wages, rents, policy, investment

Key takeaways: before constructing an index, settle its purpose, items, base year (normal and recent), formula and data sources. Index numbers are indispensable for policy: CPIs guide wage and price policy, the WPI measures inflation and deflates aggregates, the IIP tracks industry and the Sensex guides investors. Inflation rate = change in index ÷ previous index × 100; real wage = money wage × 100 ÷ CPI; purchasing power of a rupee = 100 ÷ CPI.

Check your understanding

  1. 1. Illustrative: a price index rises from 200 to 205 in a week. The weekly inflation rate is:

    1. 5%
    2. 2.5%
    3. 0.5%
    4. 2.44%
    Show answer

    Answer: B. Inflation = (205 − 200) ÷ 200 × 100 = 5 ÷ 200 × 100 = 2.5%. 2.44% wrongly divides by 205.

  2. 2. Illustrative: with a cost of living index of 400, the real wage corresponding to a money wage of ₹24,000 is:

    1. ₹6,000
    2. ₹9,600
    3. ₹96,000
    4. ₹60,000
    Show answer

    Answer: A. Real wage = 24,000 × 100 ÷ 400 = ₹6,000.

  3. 3. Which year is most suitable as the base year of an index number?

    1. A year of record-high prices
    2. A year of severe drought
    3. A normal year that is not too far in the past
    4. A year 50 years ago
    Show answer

    Answer: C. A base year should be as normal as possible and fairly recent; years with extreme values or very old years give misleading comparisons.

  4. 4. Illustrative: a person earned ₹5,000 in the base year and the cost of living index is now 320. To maintain the same standard of living, his salary should be:

    1. ₹15,625
    2. ₹8,200
    3. ₹1,600
    4. ₹16,000
    Show answer

    Answer: D. Required salary = base salary × index ÷ 100 = 5,000 × 320 ÷ 100 = ₹16,000.

  5. 5. Assertion (A): The purchasing power of money falls when the cost of living index rises. Reason (R): The purchasing power of money is the reciprocal of the cost of living index.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true, and R explains A: since purchasing power = 1 ÷ index (with the index as a ratio to 100), a higher index means a rupee buys less.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Index Numbers

Privacy · Terms · Refunds · Delivery