Revision notes

Chapter 10 Water in the Atmosphere: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Water vapour and humidity: absolute humidity, relative humidity and dew point

Exchange of water between the earth and the atmosphere

  1. Evaporation and transpiration Water from seas, lakes and plants enters the air as vapour.
  2. Water vapour in the air Carried by winds; makes up 0 to 4 per cent of the air by volume.
  3. Condensation Cooling turns vapour into droplets or ice crystals: dew, frost, fog, clouds.
  4. Precipitation Rain, snow, sleet or hail return water to land and sea.

Then back to step 1: Evaporation and transpiration

Ways of describing moisture in the air
TermMeaningUnit
Absolute humidityActual amount of water vapour in the air: the weight of water vapour per unit volume of airgrams per cubic metre
Relative humidityMoisture present in the air as a percentage of its full capacity at that temperatureper cent
Saturated airAir holding moisture to its full capacity at a given temperature; it cannot take any more(a state, not a unit)
Dew pointThe temperature at which saturation occurs in a given sample of air°C

Relative humidity (%) = actual water vapour in the air ÷ the most it could hold at that temperature × 100. Air at 100 per cent is saturated, and the temperature at which this happens is the dew point.

Absolute and relative humidity

  • Absolute humidity
    • Actual amount of vapour
    • Grams per cubic metre
    • Does not change just because air warms or cools
    • Varies from place to place
  • Relative humidity
    • Amount compared with full capacity
    • Per cent
    • Falls when air warms, rises when air cools
    • Greater over oceans, least over continents

Key takeaways: water vapour is 0-4 per cent of the air by volume and water exists in the air as gas, liquid and solid. Evaporation and transpiration add vapour; condensation and precipitation remove it. Absolute humidity is grams of vapour per cubic metre; relative humidity is the percentage of full capacity at a given temperature; air at full capacity is saturated, and the temperature at which this happens is the dew point.

Read the full lesson

Lesson 2

Evaporation and condensation: how vapour is added and removed

Evaporation adds vapour and stores heat (latent heat of vaporisation); condensation removes vapour and releases that heat. Condensation needs cooling to the dew point and, in free air, hygroscopic nuclei such as dust, smoke and sea salt.

From moist air to condensed water

  1. Moist air Contains water vapour below saturation.
  2. Cooling Temperature falls (the most favourable condition).
  3. Dew point reached Air becomes saturated: relative humidity 100 per cent.
  4. Nuclei or a cold surface Vapour collects on dust, smoke, salt or a cold object.
  5. Condensation Droplets or ice crystals form: dew, frost, fog or cloud.

Forms of condensation classified by location

  • On cold solid surfaces
    • Dew: dew point above freezing
    • Frost: dew point at or below freezing
  • In the air at or near the ground
    • Fog: visibility below 1 km
    • Mist: visibility 1 to 2 km
  • In free air at considerable height
    • Clouds: droplets or ice crystals around nuclei

Key takeaways: evaporation turns liquid into vapour, driven by heat and speeded by warmth, dry air and wind; the latent heat of vaporisation is stored in the vapour. Condensation turns vapour into water through loss of heat, around hygroscopic nuclei (dust, smoke, sea salt) or on cold surfaces; a fall in temperature is the most favourable condition. Its forms are dew, frost, fog and clouds, classified by temperature (dew point above or below freezing) and location.

Read the full lesson

Lesson 3

Dew, frost, fog, mist and smog

Dew and frost

  • Dew
    • Water droplets on cool surfaces
    • Dew point above freezing point
    • Clear sky, calm air, high humidity, long cold night
  • White frost
    • Minute ice crystals on cold surfaces
    • Dew point at or below freezing point (0°C)
    • Same conditions as dew, but air at or below freezing
Fog and mist compared
FeatureFogMist
Horizontal visibilityLess than 1 kmBetween 1 km and 2 km
Moisture (as the textbook describes it)Drier than mistMore moisture; each nucleus has a thicker layer of water
Where commonWhere warm currents of air meet cold currentsOver mountains, where rising warm air meets cold slopes
NucleiDust, smoke and salt particlesDust, smoke and salt particles

Fog: a cloud at or near the ground with visibility under 1 km. Mist: visibility 1-2 km. Smog: fog mixed with smoke. Dew and frost form on surfaces; fog and mist form within the air.

Telling the near-ground forms apart

  • Deposited on solid surfaces
    • Dew point above 0°C: dew (droplets)
    • Dew point at or below 0°C: frost (ice crystals)
  • Suspended in the air near the ground
    • Visibility under 1 km: fog
    • Visibility 1-2 km: mist
    • Fog plus smoke: smog

Key takeaways: dew is droplets deposited on cool surfaces when the dew point is above freezing; white frost is ice crystals deposited when the dew point is at or below 0°C; both need clear skies, calm air, high humidity and long cold nights. Fog is a ground-level cloud formed by sudden cooling of moist air, with visibility under 1 km; mist allows 1-2 km and, by the textbook's account, holds more moisture; smog is fog mixed with smoke, common in urban and industrial centres.

Read the full lesson

Lesson 4

Clouds and the forms of precipitation

The four basic cloud types
TypeHeight (textbook)AppearanceNotes
CirrusHigh: 8,000-12,000 mThin, detached, feathery; always whiteHighest of the four basic types
CumulusGenerally 4,000-7,000 mLike cotton wool, in scattered patchesFlat base
StratusLayered cloudsCover large portions of the skyForm by loss of heat or mixing of air masses of different temperatures
NimbusMiddle levels or very near the surfaceBlack or dark grey, shapeless masses of thick vapourExtremely dense, opaque to sunlight; may seem to touch the ground

Cloud types formed by combination

  • High clouds
    • Cirrus
    • Cirrostratus
    • Cirrocumulus
  • Middle clouds
    • Altostratus
    • Altocumulus
  • Low clouds
    • Stratocumulus
    • Nimbostratus
  • Clouds with extensive vertical development
    • Cumulus
    • Cumulonimbus

Cirrus: high, white and feathery. Cumulus: cotton-wool heaps with flat bases. Stratus: sheets covering the sky. Nimbus: dark, dense rain clouds near the ground.

Sleet and hail

  • Sleet
    • Warm layer above, sub-freezing layer near the ground
    • Raindrops freeze on the way down
    • Small ice pellets no bigger than raindrops
    • Includes refrozen melted snow-water
  • Hail
    • Raindrops pass through colder layers
    • Small rounded solid pieces of ice
    • Several concentric layers of ice
    • Linked to tall storm clouds (Chapter 9)

Key takeaways: clouds are masses of droplets or ice crystals formed at height. Cirrus (8,000-12,000 m) is high, thin and white; cumulus (generally 4,000-7,000 m) is cotton-wool with flat bases; stratus is layered; nimbus is dark, dense and low. Combinations give high, middle, low and vertically developed clouds. Precipitation falls when droplets grow too heavy: rain, snow (hexagonal crystals, below 0°C), sleet (warm layer over a freezing layer) and hail (concentric layers of ice).

Read the full lesson

Lesson 5

Types of rainfall and the world distribution of rainfall

Types of rainfall by origin

  • Convectional rain Heated air rises in convection currents, expands, cools and condenses.
  • Orographic or relief rain Saturated air is forced to rise over a mountain barrier.
  • Cyclonic or frontal rain Air rises in cyclones and along fronts (see Chapter 9).

Convectional rain

  1. Strong heating of the ground Hot afternoon or hot season.
  2. Air rises in convection currents Warm air is light and ascends.
  3. Air expands and cools Temperature falls to the dew point.
  4. Cumulus clouds grow Condensation releases latent heat.
  5. Short, heavy shower Often with thunder and lightning.

Windward and leeward sides of a mountain

  • Windward side
    • Moist air is forced to rise
    • Air expands and cools
    • Condensation: heavy rain
    • Greater rainfall
  • Leeward side (rain shadow)
    • Air descends
    • Air warms; capacity for moisture rises
    • Little condensation
    • Rainless and dry

Every type of rain needs rising, cooling air. Convection lifts it by heating, mountains lift it by relief, and cyclones and fronts lift it by meeting air masses. Descending air warms and dries, giving a rain shadow.

Major precipitation regimes of the world
Annual rainfallRegions (as described in the textbook)
Over 200 cm (heavy)Equatorial belt; windward slopes of mountains along western coasts in the cool temperate zone; coastal areas of monsoon lands
100-200 cm (moderate)Interior continental areas; coastal areas of the continents receive moderate amounts
50-100 cmCentral parts of tropical lands; eastern and interior parts of temperate lands
Less than 50 cm (very low)Rain-shadow zones of continental interiors; high latitudes

Key takeaways: rainfall is convectional (heating; short, heavy afternoon showers; equatorial regions and continental interiors), orographic (forced ascent over mountains; wet windward, dry leeward rain shadow) or cyclonic/frontal. Rainfall decreases from equator to poles and from coasts to interiors, and is more over oceans; eastern coasts are wetter at 35°-40° and western margins at 45°-65°. Regimes range from over 200 cm to under 50 cm, and an even seasonal spread (equatorial belt, western cool temperate regions) adds to rain's usefulness.

Read the full lesson

Privacy · Terms · Refunds · Delivery