• Foundation
  • About 18 min
  • 5 practice questions

Geological structure: the three geological divisions of India

Trace how plate movement and endogenic and exogenic forces shaped India, and describe the Peninsular Block, the Himalayas and other Peninsular mountains, and the Indo-Ganga-Brahmaputra Plain.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain how the northward movement of the Indian plate and endogenic and exogenic forces produced India's structure.
  • Describe the extent, rocks and features of the Peninsular Block.
  • Contrast the young Himalayan mountains with the rigid Peninsular Block, and explain how the Indo-Ganga-Brahmaputra Plain formed.

Mountains, plains and plateaus are not permanent. The textbook reminds us that the Earth is about 4,600 million years old and that its landforms have changed throughout this long history, mainly through endogenic forces (from inside the Earth, such as folding, faulting and volcanic activity) and exogenic forces (on the surface, such as rivers, wind and weathering). To understand India's landscapes we start with its rocks and structure.

A plate on the move

Millions of years ago the Indian plate lay south of the Equator. It was much larger, and the Australian plate was a part of it. Over millions of years this plate broke into parts: the Australian plate moved south-eastwards and the Indian plate moved north. This northward movement is still continuing, with important consequences for the subcontinent, such as the continuing rise of the Himalayas and earthquakes along the mountain belt.

Through the interplay of endogenic and exogenic forces and these lateral plate movements, India's present geological structure came into being. Based on variations in structure and formations, the textbook divides India into three geological divisions, which broadly follow its physical features.

Geological divisions of India

  • The Peninsular Block Ancient, rigid and stable
    • Gneisses and granites
    • Relict and residual mountains
    • Rift valleys and block mountains
  • The Himalayas and other Peninsular mountains Young, weak and flexible
    • Folds, faults and thrust plains
    • Fast-flowing youthful rivers
    • Gorges, V-shaped valleys, rapids
  • The Indo-Ganga-Brahmaputra Plain Filled geosynclinal depression
    • Alluvium from Himalayan and Peninsular rivers
    • Deposits 1,000-2,000 m deep on average

The Peninsular Block

Boundary in words: the northern edge of the Peninsular Block is an irregular line running from Kachchh, along the western flank of the Aravali Range near Delhi, and then roughly parallel to the Yamuna and the Ganga as far as the Rajmahal Hills and the Ganga delta. The Karbi Anglong and Meghalaya Plateau in the north-east and Rajasthan in the west are extensions of the block. The north-eastern parts are separated from the Chotanagpur plateau by the Malda fault in West Bengal, and in Rajasthan the desert overlies the block.

Rocks and stability: the Peninsula is made essentially of a great complex of very ancient gneisses and granites. Since the Cambrian period it has stood like a rigid block, except that part of its western coast is submerged beneath the sea and some parts changed through tectonic activity without disturbing the original basement. As part of the Indo-Australian Plate, it has undergone vertical movements and block faulting: the rift valleys of the Narmada, the Tapi and the Mahanadi and the Satpura block mountains are examples.

Relief: the Peninsula mostly has relict and residual mountains worn down over long ages, such as the Aravali hills, Nallamala hills, Javadi hills, Veliconda hills, Palkonda range and Mahendragiri hills. Its river valleys are shallow with low gradients, and most east-flowing rivers form deltas before entering the Bay of Bengal: the deltas of the Mahanadi, Krishna, Kaveri and Godavari are important examples.

The Himalayas and other Peninsular mountains

Unlike the rigid Peninsular Block, these mountains are young, weak and flexible in structure. They are still subject to endogenic and exogenic forces, which produce faults, folds and thrust plains. They are tectonic in origin and are dissected by fast-flowing rivers in their youthful stage; landforms such as gorges, V-shaped valleys, rapids and waterfalls indicate this stage.

The Indo-Ganga-Brahmaputra Plain

The third division is the plain formed by the Indus, the Ganga and the Brahmaputra. It was originally a geo-synclinal depression (a long trough in the crust) that reached its maximum development during the third phase of Himalayan mountain formation, about 64 million years ago. Since then, sediments from Himalayan and Peninsular rivers have gradually filled it. The average depth of alluvial deposits is 1,000-2,000 m.

Peninsular Block and Himalayan mountains

  • Peninsular Block
    • Very ancient gneisses and granites
    • Rigid and stable since the Cambrian
    • Relict, worn-down mountains
    • Shallow valleys, low gradients
  • Himalayas and other Peninsular mountains
    • Young, weak and flexible
    • Still folding and faulting
    • Tectonic mountains
    • Gorges and V-shaped valleys of youthful rivers

Worked example 1: assigning features to divisions

Assign each feature to a geological division: (i) Satpura block mountains; (ii) V-shaped valleys of fast rivers; (iii) alluvium 1,000-2,000 m deep; (iv) Nallamala hills. Reasoning: block mountains and relict hills belong to the stable Peninsula; youthful valleys belong to the young mountains; deep alluvium fills the plain. Answer: (i) Peninsular Block; (ii) Himalayas and other Peninsular mountains; (iii) Indo-Ganga-Brahmaputra Plain; (iv) Peninsular Block.

Worked example 2: comparing river gradients

The textbook invites you to compare river gradients. Gradient = fall in height ÷ horizontal distance. Using made-up illustrative figures: a Himalayan stream falls 2,000 m over 100 km; a Peninsular stream falls 200 m over 100 km. Working: Himalayan gradient = 2,000 m ÷ 100 km = 20 m per km; Peninsular gradient = 200 m ÷ 100 km = 2 m per km. Answer: the Himalayan stream is ten times steeper, fitting the textbook's contrast between youthful mountain rivers and the low gradients of the old Peninsula.

Worked example 3: tracing the boundary

A student describes the northern boundary of the Peninsular Block as 'along the Himalayan foothills'. Is this right? Reasoning: the textbook's line runs from Kachchh along the western side of the Aravalis near Delhi, then roughly parallel to the Yamuna and Ganga to the Rajmahal Hills and the Ganga delta. The Himalayan foothills lie much further north, beyond the plain. Answer: no; the boundary runs along the southern side of the great plain.

Three geological divisions: the rigid, ancient Peninsular Block; the young, flexible Himalayas and other Peninsular mountains; and the Indo-Ganga-Brahmaputra Plain, a geosynclinal trough filled with 1,000-2,000 m of alluvium.

Key takeaways: India's structure results from endogenic and exogenic forces and the northward drift of the Indian plate, which continues today; the Peninsular Block is made of ancient gneisses and granites and has been rigid since the Cambrian, with rift valleys, block mountains and relict hills; the Himalayas are young, weak and still folding, cut by youthful rivers; and the Indo-Ganga-Brahmaputra Plain is a geosyncline filled with alluvium since about 64 million years ago.

Check your understanding

  1. 1. According to the textbook, the Peninsular Block has stood as a rigid block since the:

    1. Cambrian period
    2. Mesozoic era
    3. Third phase of Himalayan formation
    4. Last ice age
    Show answer

    Answer: A. The book says the Peninsula has been standing like a rigid block since the Cambrian period, apart from some submerged western coast and local tectonic changes.

  2. 2. Which of these is an example of block faulting in the Peninsula?

    1. The Shiwalik range
    2. The rift valley of the Narmada
    3. The Sunderbans delta
    4. The Tarai belt
    Show answer

    Answer: B. The textbook cites the rift valleys of the Narmada, Tapi and Mahanadi and the Satpura block mountains as results of vertical movement and block faulting.

  3. 3. The Himalayas show gorges, V-shaped valleys, rapids and waterfalls because:

    1. they are made of ancient granites
    2. they are covered by alluvium
    3. their rivers are in the youthful stage
    4. they receive little rainfall
    Show answer

    Answer: C. These landforms indicate youthful rivers cutting down rapidly into young, rising mountains.

  4. 4. Assertion (A): The Indo-Ganga-Brahmaputra Plain has very deep alluvial deposits. Reason (R): It was a geosynclinal depression that has been filled with sediments from Himalayan and Peninsular rivers.

    1. A is true, but R is false
    2. A is false, but R is true
    3. Both A and R are true, but R does not explain A
    4. Both A and R are true, and R explains A
    Show answer

    Answer: D. The trough has been filled since about 64 million years ago, giving alluvium averaging 1,000-2,000 m deep. The filling of the depression is exactly why the deposits are deep.

  5. 5. Which fault separates the north-eastern parts of the Peninsular Block from the Chotanagpur plateau?

    1. Bhima fault
    2. Malda fault
    3. Narmada fault
    4. Satpura fault
    Show answer

    Answer: B. The textbook names the Malda fault in West Bengal. The Bhima fault is noted for recurrent seismic activity on the Peninsular plateau.

Privacy · Terms · Refunds · Delivery