- Foundation
- About 17 min
- 5 practice questions
Earthquakes in India: causes, hazard zones, effects and mitigation
Explain why earthquakes occur along the Himalayan arc and in the Peninsula, describe India's five earthquake damage risk zones, list the effects of earthquakes and suggest mitigation measures.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the plate-tectonic cause of Himalayan earthquakes and the Bhima fault explanation for Peninsular earthquakes.
- Describe the five earthquake damage risk zones and the regions in the very high and high zones.
- List the effects of earthquakes on the ground, structures and water, and suggest mitigation measures.
The textbook calls earthquakes by far the most unpredictable and highly destructive of all natural disasters. Those of tectonic origin are the most devastating and affect large areas; those linked to volcanic eruptions, rock falls, landslides, mining subsidence or the filling of dams and reservoirs have a limited area and scale of damage.
Why the Himalayas shake
The Indian plate moves about one centimetre a year towards the north and north-east, and its movement is obstructed by the Eurasian plate to the north. The two plates are said to be locked, so energy accumulates. Stress builds until the lock breaks, and the sudden release of energy causes earthquakes along the Himalayan arc.
The earthquake cycle along the Himalayan arc
- Indian plate pushes north and north-east About 1 cm a year.
- Eurasian plate blocks it; plates lock Movement is held back.
- Energy and stress accumulate Rocks strain over years.
- Lock breaks: sudden release of energy An earthquake occurs.
- Plates lock again Stress begins to build afresh.
Then back to step 1: Indian plate pushes north and north-east
The most vulnerable states and union territories named in the textbook are Jammu and Kashmir, Ladakh, Himachal Pradesh, Uttarakhand, Sikkim, the Darjeeling subdivision of West Bengal and all seven north-eastern states. Severe earthquakes have also struck the central-western parts of India: Gujarat (1819, 1956 and 2001) and Maharashtra (1967 and 1993). Earthquakes in the old, stable Peninsula were long hard to explain; some scientists now suggest a fault line and energy build-up along the Bhima (Krishna) near Latur and Osmanabad in Maharashtra, and a possible breaking of the Indian plate.
Earthquake hazard zones
The National Geophysical Laboratory, the Geological Survey of India, the Department of Meteorology and the National Institute of Disaster Management analysed more than 1,200 earthquakes and divided India into five zones: very high, high, moderate, low and very low damage risk. The first two have had some of the most devastating earthquakes.
| Zone | Regions given in the textbook |
|---|---|
| Very high damage risk | North-eastern states; areas north of Darbhanga and Araria along the Indo-Nepal border in Bihar; Uttarakhand; western Himachal Pradesh around Dharamshala; Kashmir Valley; Kachchh in Gujarat |
| High damage risk | Remaining parts of Jammu and Kashmir and Ladakh; Himachal Pradesh; northern Punjab; eastern Haryana; Delhi; western Uttar Pradesh; northern Bihar |
| Moderate to very low damage risk | Rest of the country; the safest areas lie on the stable Deccan plateau |
Consequences and effects
An earthquake becomes a calamity when it strikes densely populated areas. It destroys settlements, infrastructure, transport and communication, industries and development, robs people of material and socio-cultural gains built over generations, and leaves them homeless, a heavy burden on weak economies.
| On ground | On man-made structures | On water |
|---|---|---|
| Fissures | Cracking | Waves |
| Settlements | Slidings | Hydro-dynamic pressure |
| Landslides | Overturning | Tsunami |
| Liquefaction | Buckling | Possible chain effects |
| Earth pressure; possible chain effects | Collapse; possible chain effects | - |
Surface seismic waves open fissures through which water and volatile materials gush out, flooding nearby areas. Earthquakes also trigger landslides, which may block rivers and form reservoirs; rivers may change course, causing floods.
Mitigation
Because earthquakes cannot be prevented, and because they destroy the very transport and communication links needed for relief, the emphasis must be on preparedness and mitigation:
- Establish seismological (earthquake monitoring) centres for regular monitoring and fast dissemination of information; GPS can help monitor plate movement.
- Prepare a vulnerability map of the country and spread risk information, educating people to minimise adverse impacts.
- Modify house types and building designs in vulnerable areas, and discourage high-rise buildings, large industries and big cities there.
- Make earthquake-resistant designs and light materials mandatory in major construction in vulnerable areas.
Worked example 1: plate movement over time
At the textbook's rate of about 1 cm a year, how far would the Indian plate move in 1,000 years and in one million years? Working: 1,000 × 1 cm = 1,000 cm = 10 m; 10,00,000 × 1 cm = 10,00,000 cm = 10 km. Answer: 10 m and 10 km. Slow, steady motion resisted by the Eurasian plate stores enormous energy.
Worked example 2: placing places in zones
Using the textbook's zoning, place: (i) the Kashmir Valley; (ii) Delhi; (iii) the interior of the Deccan plateau; (iv) Kachchh. Answer: (i) very high; (ii) high; (iii) low or very low (stable landmass); (iv) very high.
Worked example 3: why relief is hard after an earthquake
Reasoning chain: the shaking cracks roads and bridges and cuts power and phone lines; landslides block hill roads; so rescuers and supplies cannot reach victims quickly. Answer: this is why the textbook stresses preparedness before the event (maps, monitoring, safe buildings) rather than only relief afterwards.
Earthquakes cannot be prevented, so the emphasis is on preparedness and mitigation: monitoring, vulnerability mapping and awareness, safer building designs and earthquake-resistant construction.
Key takeaways: tectonic earthquakes are the most destructive; along the Himalayan arc they result from the locked Indian and Eurasian plates releasing stored energy; vulnerable areas include Jammu and Kashmir, Ladakh, Himachal Pradesh, Uttarakhand, Sikkim, Darjeeling and the north-east, with Gujarat and Maharashtra also affected; India has five damage risk zones, the very high zone including the north-east, Kashmir Valley, Uttarakhand and Kachchh; effects reach the ground, buildings and water; and mitigation relies on monitoring, vulnerability maps, safer designs and earthquake-resistant construction.
Check your understanding
-
1. Why are there more earthquakes in the Himalayas and the north-eastern region?
- Heavy rainfall loosens rocks
- The northward-moving Indian plate is locked against the Eurasian plate, building up and suddenly releasing energy
- The region has many dams
- The area lies on the stable Deccan plateau
Show answer
Answer: B. The textbook explains that the plates lock, energy accumulates, and the breaking of the lock releases energy as earthquakes along the Himalayan arc.
-
2. Which region is placed in the very high damage risk zone?
- The interior Deccan plateau
- Coastal Tamil Nadu
- Kachchh in Gujarat
- Eastern Rajasthan
Show answer
Answer: C. The textbook lists Kachchh, with the north-east, Kashmir Valley, Uttarakhand, western Himachal around Dharamshala and north Bihar along the Nepal border, in the very high zone.
-
3. Earthquakes in the stable Peninsula near Latur and Osmanabad are explained by some scientists through:
- volcanic eruptions
- a fault line and energy build-up along the Bhima (Krishna)
- the monsoon
- glacier movement
Show answer
Answer: B. The textbook mentions a theory of a fault line and energy build-up along the Bhima (Krishna) near Latur and Osmanabad, and a possible breaking of the Indian plate.
-
4. Liquefaction and fissures are effects of earthquakes on:
- the ground
- man-made structures
- water
- the atmosphere
Show answer
Answer: A. In the textbook's table, fissures, settlements, landslides, liquefaction and earth pressure are effects on the ground.
-
5. Which is NOT a mitigation measure suggested in the textbook for earthquakes?
- Seismological monitoring centres
- Vulnerability maps and awareness
- Earthquake-resistant designs and light materials
- Encouraging high-rise buildings in vulnerable areas
Show answer
Answer: D. The textbook says high-rise buildings, large industries and big cities should be discouraged in vulnerable areas.
Sign in to keep track of the lessons you finish.