Revision notes

Chapter 6 Natural Hazards and Disasters: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Change, natural hazards and disasters: meaning and classification

Natural hazard and natural disaster

  • Natural hazard
    • Elements of the natural environment with the potential to cause harm to people or property
    • May be swift or permanent features of a setting
    • Examples: ocean currents, steep unstable Himalayan slopes, extreme desert or glacial climate
  • Natural disaster
    • Relatively sudden
    • Causes large-scale, widespread death, loss of property and disruption of social life
    • People have little or no control
    • An event is a disaster when the damage is very high

How a hazard becomes a disaster

  1. Natural hazard exists e.g. a cyclone-prone coast or an unstable slope.
  2. People and property move into the hazard area Settlement, cities, roads and farms grow there.
  3. Vulnerability rises More people and assets exposed; less capacity to cope.
  4. Hazard event strikes Sudden, often with little warning.
  5. Large-scale loss of life and property The event is now a disaster.
Four categories of natural disasters (after the textbook's table)
AtmosphericTerrestrialAquaticBiological
Blizzards, thunderstorms, lightningEarthquakes, volcanic eruptionsFloodsPlants and animals as colonisers (e.g. locusts)
Tornadoes, tropical cyclonesLandslides, avalanchesTidal waves, storm surgeInsect infestation
Drought, hailstormSubsidence, soil erosionTsunamiFungal, bacterial and viral diseases such as bird flu and dengue
Frost, heat wave or loo, cold wave---

A natural hazard is a feature of the environment with the potential to cause harm; it becomes a natural disaster when it strikes suddenly and causes large-scale loss of life, property and social life that people cannot control.

Key takeaways: change is constant, value-neutral in nature but value-loaded for people; a disaster is a sudden, largely uncontrollable event causing serious loss and needing efforts beyond normal emergency services; human activities cause some disasters directly and intensify others; a hazard is a potential for harm and a disaster is the large-scale damage itself; settling in hazard-prone areas increases vulnerability; the Yokohama Strategy (1994) and the IDNDR (1990-2000) organised international action; and natural disasters are classified as atmospheric, terrestrial, aquatic and biological.

Read the full lesson

Lesson 2

Earthquakes in India: causes, hazard zones, effects and mitigation

The earthquake cycle along the Himalayan arc

  1. Indian plate pushes north and north-east About 1 cm a year.
  2. Eurasian plate blocks it; plates lock Movement is held back.
  3. Energy and stress accumulate Rocks strain over years.
  4. Lock breaks: sudden release of energy An earthquake occurs.
  5. Plates lock again Stress begins to build afresh.

Then back to step 1: Indian plate pushes north and north-east

Earthquake damage risk zones of India
ZoneRegions given in the textbook
Very high damage riskNorth-eastern states; areas north of Darbhanga and Araria along the Indo-Nepal border in Bihar; Uttarakhand; western Himachal Pradesh around Dharamshala; Kashmir Valley; Kachchh in Gujarat
High damage riskRemaining parts of Jammu and Kashmir and Ladakh; Himachal Pradesh; northern Punjab; eastern Haryana; Delhi; western Uttar Pradesh; northern Bihar
Moderate to very low damage riskRest of the country; the safest areas lie on the stable Deccan plateau
Effects of earthquakes (after the textbook's table)
On groundOn man-made structuresOn water
FissuresCrackingWaves
SettlementsSlidingsHydro-dynamic pressure
LandslidesOverturningTsunami
LiquefactionBucklingPossible chain effects
Earth pressure; possible chain effectsCollapse; possible chain effects-

Earthquakes cannot be prevented, so the emphasis is on preparedness and mitigation: monitoring, vulnerability mapping and awareness, safer building designs and earthquake-resistant construction.

Key takeaways: tectonic earthquakes are the most destructive; along the Himalayan arc they result from the locked Indian and Eurasian plates releasing stored energy; vulnerable areas include Jammu and Kashmir, Ladakh, Himachal Pradesh, Uttarakhand, Sikkim, Darjeeling and the north-east, with Gujarat and Maharashtra also affected; India has five damage risk zones, the very high zone including the north-east, Kashmir Valley, Uttarakhand and Kachchh; effects reach the ground, buildings and water; and mitigation relies on monitoring, vulnerability maps, safer designs and earthquake-resistant construction.

Read the full lesson

Lesson 3

Tsunamis and tropical cyclones

From sea-floor movement to coastal devastation

  1. Earthquake or volcanic eruption The sea floor moves abruptly.
  2. Water is displaced A vertical wave and after-waves form.
  3. Deep ocean Long wavelength, small height; ships barely notice.
  4. Shallow coastal water Wavelength shortens, period unchanged, height grows to 15 m or more.
  5. Water floods the land Ports, towns and settlements destroyed.

Initial conditions for a tropical cyclone

  • Warm, moist air A large, continuous supply that releases enormous latent heat
  • Strong Coriolis force Prevents the central low from filling; absent near the Equator, so no cyclones form between 0° and 5°
  • Unstable troposphere Creates local disturbances around which a cyclone develops
  • No strong vertical wind shear Strong shear would disturb the vertical transport of latent heat

A tsunami is low and long in deep water but grows tall in shallow water. A tropical cyclone is a heat engine fed by the latent heat of warm, moist air; it weakens over land and brings storm surges to the coast.

Key takeaways: tsunamis are seismic sea waves caused by abrupt sea-floor movement; their height grows in shallow water to 15 m or more, so coasts suffer most; the 2004 tsunami showed the need for international warning systems, which India has joined; tropical cyclones form between 30°N and 30°S (not within 5° of the Equator) and need warm moist air, a strong Coriolis force, an unstable troposphere and little vertical wind shear; around India they form in the Bay of Bengal (mostly October-November) and the Arabian Sea; they weaken inland but bring 180 km/h winds and storm surges to the coast; and shelters, embankments, afforestation and warnings reduce losses.

Read the full lesson

Lesson 4

Floods and droughts: causes, regions, consequences and control

Causes of floods

  • Natural causes Run-off exceeds channel capacity
    • Long spells of intense rain
    • Melting snow and ice
    • Storm surge on coasts
  • Human causes Raise flood intensity and spread
    • Deforestation
    • Unscientific agriculture
    • Disturbing natural drainage
    • Settling on flood plains and river beds
  • Contributing land conditions Less water soaks in; channels choke
    • Reduced infiltration
    • Eroded material in the water
Flooding in different parts of India
Type of floodingRegions given in the textbook
River floodsAssam, West Bengal, Bihar, eastern Uttar Pradesh
Cyclone floodsCoastal Odisha, Andhra Pradesh, Tamil Nadu, Gujarat
Flash floodsPunjab, Rajasthan, northern Gujarat, Haryana

Types of drought

  • Meteorological Prolonged inadequate rainfall, badly distributed in time and space
  • Agricultural (soil moisture) Too little soil moisture for crops; crop failure
    • An area with over 30 per cent of its gross cropped area irrigated is excluded from the drought-prone category
  • Hydrological Water in aquifers, lakes and reservoirs falls below what precipitation can replenish
  • Ecological A natural ecosystem's productivity fails from water shortage, damaging the ecosystem
Drought-prone regions of India
SeverityRegions given in the textbook
ExtremeMost of Rajasthan west of the Aravalis (Marusthali) and Kachchh; districts such as Jaisalmer and Barmer receiving under 90 mm a year
SevereEastern Rajasthan, most of Madhya Pradesh, eastern Maharashtra, interior Andhra Pradesh and the Karnataka Plateau, northern interior Tamil Nadu, southern Jharkhand, interior Odisha
ModerateNorthern Rajasthan, Haryana, southern Uttar Pradesh, rest of Gujarat, Maharashtra except Konkan, Jharkhand, Coimbatore plateau, interior Karnataka

Floods: run-off exceeds the carrying capacity of channels, worsened by deforestation and settling on flood plains. Drought: an extended water shortage from too little rain, high evaporation and over-use of water; meteorological, agricultural, hydrological and ecological.

Key takeaways: floods occur when run-off exceeds channel capacity and are intensified by human activity; 40 million hectares are flood-prone according to the National Flood Commission; the east suffers river floods, the coasts cyclone floods, and the north-west flash floods; floods destroy crops, property and health though they also leave fertile silt, as on Majuli; control needs embankments, dams, afforestation and freeing flood plains; drought is a prolonged water shortage of four types; the north-west is extremely drought-prone; and relief, groundwater use, inter-basin transfer, drought-resistant crops and rainwater harvesting reduce its impact.

Read the full lesson

Lesson 5

Landslides and disaster management

Landslide vulnerability zones of India
ZoneAreas given in the textbook
Very high vulnerabilityYoung, unstable mountains of the Himalayas and Andaman and Nicobar; high-rainfall steep slopes of the Western Ghats and Nilgiris; the north-east; areas of frequent earthquake shaking; areas of intense construction of roads, dams, etc.
High vulnerabilitySimilar conditions with a different combination, intensity and frequency of factors; all Himalayan states and the north-eastern states except the plains of Assam
Moderate to low vulnerabilityLow-rainfall trans-Himalayan Ladakh and Spiti; the Aravali; rain-shadow parts of the Western and Eastern Ghats and the Deccan plateau; mining and subsidence landslides in Jharkhand, Odisha, Chhattisgarh, Madhya Pradesh, Maharashtra, Andhra Pradesh, Karnataka, Tamil Nadu, Goa and Kerala
Other (safe) areasRajasthan, Haryana, Uttar Pradesh, Bihar, West Bengal (except Darjiling district), Assam (except Karbi Anglong district), coastal regions of the southern states

Landslide mitigation

  • Restrictions
    • Limit roads and dams in fragile zones
    • Farm only valleys and moderate slopes
    • Control large settlements in high vulnerability zones
  • Positive actions
    • Large-scale afforestation
    • Bunds to slow water flow
    • Terrace farming instead of jhumming in north-eastern hills

Three stages of disaster management

  1. Pre-disaster Data and information, vulnerability zoning maps, awareness, planning, preparedness and prevention.
  2. During the disaster Rescue and relief: evacuation, shelters and relief camps, water, food, clothing and medical aid.
  3. Post-disaster Rehabilitation and recovery of victims; capacity-building for future disasters.

Then back to step 1: Pre-disaster

Disaster management has three stages: pre-disaster (data, vulnerability maps, awareness, preparedness), during the disaster (rescue and relief), and post-disaster (rehabilitation, recovery and capacity-building).

Key takeaways: landslides are rapid slides of rock and debris controlled by local factors, so they are hard and costly to monitor; the Himalayas, Andaman and Nicobar, Western Ghats, Nilgiris and the north-east are most vulnerable; landslides block roads, railways and rivers and hinder development; mitigation combines restrictions with afforestation, bunds and terrace farming; the Disaster Management Bill, 2005 defines disasters by their scale beyond a community's coping capacity; and management proceeds in pre-disaster, during-disaster and post-disaster stages.

Read the full lesson

Privacy · Terms · Refunds · Delivery