- Foundation
- About 18 min
- 5 practice questions
Temperature and the factors that control it
Distinguish heat from temperature, explain how latitude, altitude, distance from the sea, air masses and ocean currents control temperature, and calculate lapse-rate cooling, daily means and annual range.
If something looks wrong, please tell us.
By the end of this lesson you can
- Distinguish heat from temperature.
- Explain each factor that controls the temperature of a place, including the normal lapse rate of 6.5°C per 1,000 m.
- Calculate temperature at height, a daily mean temperature and the annual range of temperature.
The interaction of insolation with the atmosphere and the earth's surface creates heat, and we measure its effect as temperature. Two places on the same latitude can still have very different temperatures. This lesson lists the controls on temperature and shows how to work with temperature figures.
Heat and temperature
Heat represents the molecular movement of the particles that make up a substance; it is energy. Temperature is the measurement, in degrees, of how hot or cold a thing or a place is. A large lake and a cup of tea can be at the same temperature, but the lake holds far more heat.
Factors controlling temperature distribution
The textbook lists the following controls on the temperature of air at any place:
Controls on the temperature of a place
- Latitude Insolation varies with latitude, so temperature does too; low latitudes are generally warmer.
- Altitude Air is heated from below, so temperature generally falls with height.
- Distance from the sea The sea heats and cools slowly; coastal places have milder, more even temperatures.
- Air masses Warm air masses raise temperature; cold air masses lower it.
- Ocean currents Coasts washed by warm currents are warmer than those washed by cold currents.
- Local aspects Slope, aspect and local features modify temperature at small scales.
Latitude. The temperature of a place depends on the insolation it receives, and insolation varies with latitude (Lesson 1). So, in general, temperature decreases from the equatorial regions towards the poles.
Altitude. Because the atmosphere is heated indirectly by terrestrial radiation from below, places near sea level record higher temperatures than places at higher elevations. The rate at which temperature decreases with height is the normal lapse rate, which is 6.5°C per 1,000 m.
Distance from the sea. Compared with land, the sea heats slowly and loses heat slowly (its specific heat is high), while land heats up and cools down quickly. So temperature varies less over the sea than over land. Places near the sea also come under the moderating influence of sea and land breezes. Places deep inside continents have hot summers and cold winters, a quality called continentality.
Air masses and ocean currents. Places that come under the influence of warm air masses experience higher temperatures and those under cold air masses lower temperatures. Similarly, places on coasts where warm ocean currents flow record higher temperatures than places on coasts with cold currents.
Land and sea as heat stores
-
Land
- Heats up quickly
- Cools down quickly
- Large daily and annual range
- Interior places show continentality
-
Sea
- Heats up slowly
- Cools down slowly
- Small daily and annual range
- Moderates nearby coasts through breezes
Normal lapse rate: temperature falls by about 6.5°C for every 1,000 m rise in height. Temperature at height = temperature at the base − 6.5 × (rise in metres ÷ 1,000).
Worked example 1: lapse rate
A town at sea level records 32°C. What would you expect at a hill station 2,400 m above sea level at the same time, if the normal lapse rate applies? (Figures are illustrative.) Working: fall in temperature = 6.5 × (2,400 ÷ 1,000) = 6.5 × 2.4 = 15.6°C. Expected temperature = 32 − 15.6 = 16.4°C. This is why hill stations are cool in summer.
Worked example 2: finding height from temperature
A valley floor at 500 m reads 24°C and a ridge above it reads 11°C, with the normal lapse rate in force (made-up figures). How high is the ridge? Working: temperature difference = 24 − 11 = 13°C. Rise = 13 ÷ 6.5 × 1,000 = 2 × 1,000 = 2,000 m above the valley floor. Height of ridge = 500 + 2,000 = 2,500 m.
Worked example 3: daily mean and annual range
Climatological tables give the mean of the daily maximum and the mean of the daily minimum for each month. The daily mean monthly temperature = (mean daily maximum + mean daily minimum) ÷ 2. The annual range of temperature is the difference between the mean temperatures of the warmest and the coldest months. Use these made-up data for an imaginary inland station:
| Month | Mean daily maximum (°C) | Mean daily minimum (°C) | Daily mean (°C) |
|---|---|---|---|
| January (coldest) | 22.0 | 8.0 | (22.0 + 8.0) ÷ 2 = 15.0 |
| May (warmest) | 41.0 | 27.0 | (41.0 + 27.0) ÷ 2 = 34.0 |
Annual range = 34.0 − 15.0 = 19.0°C. A coastal station at the same latitude would normally show a smaller range, because the sea moderates both summer and winter.
Worked example 4: which coast is warmer?
Two imaginary ports lie on the same latitude in the middle latitudes. Port X is washed by a warm current and receives mild maritime air masses; Port Y is washed by a cold current. Reasoning: warm currents warm the air above them and the coast, cold currents chill it, so Port X should record the higher winter temperature. Latitude alone does not decide temperature.
Key takeaways: heat is the energy of moving molecules; temperature measures how hot or cold something is, in degrees. The temperature of a place is controlled by latitude, altitude (normal lapse rate 6.5°C per 1,000 m), distance from the sea, air masses, ocean currents and local aspects. Daily mean = (mean max + mean min) ÷ 2; annual range = mean of warmest month − mean of coldest month.
Check your understanding
-
1. The normal lapse rate is:
- 6.5°C per 100 m
- 1°C per 1,000 m
- 6.5°C per 1,000 m
- 10°C per 1,000 m
Show answer
Answer: C. Temperature normally falls by 6.5°C for every 1,000 m of height, as the textbook states.
-
2. A place at sea level records 30°C. Using the normal lapse rate, the expected temperature 1,800 m higher is about:
- 18.3°C
- 11.7°C
- 23.5°C
- 24.2°C
Show answer
Answer: A. Fall = 6.5 × 1.8 = 11.7°C. Temperature at height = 30 − 11.7 = 18.3°C.
-
3. For a station, the mean daily maximum in July is 34°C and the mean daily minimum is 26°C. The daily mean temperature for July is:
- 8°C
- 60°C
- 34°C
- 30°C
Show answer
Answer: D. Daily mean = (34 + 26) ÷ 2 = 60 ÷ 2 = 30°C.
-
4. Assertion (A): Coastal places have a smaller range of temperature than places deep inside continents. Reason (R): The sea heats up and cools down more slowly than land.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true and R explains A: because the sea gains and loses heat slowly, it keeps coastal air from becoming very hot or very cold, while inland places heat and cool quickly.
-
5. Which statement correctly distinguishes heat from temperature?
- Heat and temperature are two names for the same quantity
- Heat is the molecular movement (energy) of particles; temperature measures in degrees how hot or cold a thing is
- Temperature is energy; heat is measured in degrees
- Heat applies to air only and temperature to water only
Show answer
Answer: B. The chapter defines heat as the molecular movement of particles in a substance, and temperature as the measurement in degrees of how hot or cold a thing or place is.
Sign in to keep track of the lessons you finish.