Revision notes

Chapter 10 Conic Sections: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Sections of a cone: circle, ellipse, parabola and hyperbola

Sections when the plane does not pass through the vertex
Angle of the planeWhat the plane doesSection
β = 90°Cuts one nappe, perpendicular to the axisCircle
α < β < 90°Cuts right across one nappe at a slantEllipse
β = αParallel to a generator; cuts one nappe but never closesParabola
0 ≤ β < αSteep enough to cut both nappesHyperbola (two branches)

Conic sections of a double-napped cone

  • Plane misses the vertex
    • β = 90°: circle
    • α < β < 90°: ellipse
    • β = α: parabola
    • 0 ≤ β < α: hyperbola
  • Plane passes through the vertex (degenerate)
    • α < β ≤ 90°: a single point
    • β = α: a straight line (degenerate parabola)
    • 0 ≤ β < α: a pair of intersecting lines (degenerate hyperbola)
The plane definitions used in this chapter (centre or vertex at the origin)
ConicDefining propertyStandard equation
CirclePoints at a fixed distance r from a fixed centrex² + y² = r²
ParabolaPoints equidistant from a fixed point (focus) and a fixed line (directrix)y² = 4ax
EllipseSum of distances from two foci is constant (2a)x²/a² + y²/b² = 1
HyperbolaDifference of distances from two foci is constant (2a)x²/a² − y²/b² = 1

Compare the plane's angle β with the cone's angle α: β = 90° circle; α < β < 90° ellipse; β = α parabola; β < α hyperbola.

  • Conics are curves cut from a double-napped cone by a plane.
  • The angle β of the plane with the axis, compared with the cone angle α, decides the type.
  • A plane through the vertex gives degenerate conics: a point, a line, or a pair of lines.
  • Each conic also has a distance definition in the plane, which gives its equation.
Read the full lesson

Lesson 2

The circle: centre-radius form and the general equation

A circle is the set of all points in a plane that are at a fixed distance (the radius) from a fixed point (the centre).

Circle with centre (h, k) and radius r: (x − h)² + (y − k)² = r². With centre at the origin: x² + y² = r².

From an expanded equation to centre and radius

  1. Make x² and y² have coefficient 1 Divide the whole equation by that coefficient if needed.
  2. Group terms (x² + px) + (y² + qy) = constant
  3. Complete the squares Add (p/2)² and (q/2)² to both sides.
  4. Read off (x − h)² + (y − k)² = r² gives centre (h, k), radius r.
  • (x − h)² + (y − k)² = r² has centre (h, k) and radius r.
  • Complete the squares to find the centre and radius of an expanded equation.
  • x² + y² + 2gx + 2fy + c = 0: centre (−g, −f), radius √(g² + f² − c).
  • Equal distances from the centre to known points give equations for h and k.
Read the full lesson

Lesson 3

The parabola: focus, directrix and standard equations

A parabola is the set of all points in a plane that are equidistant from a fixed line (the directrix) and a fixed point not on that line (the focus).

Standard parabolas with vertex at the origin (a > 0); latus rectum 4a in each case
EquationFocusDirectrixAxisOpens
y² = 4ax(a, 0)x = −ax-axisRight
y² = −4ax(−a, 0)x = ax-axisLeft
x² = 4ay(0, a)y = −ay-axisUpwards
x² = −4ay(0, −a)y = ay-axisDownwards

Reading a parabola's equation

  1. Squared variable y² gives axis along the x-axis; x² gives axis along the y-axis.
  2. Sign of the other term Positive opens right or up; negative opens left or down.
  3. Find a Match the coefficient with 4a.
  4. Write the features Focus at distance a from the vertex, directrix on the other side, latus rectum 4a.
  • Every point of a parabola is as far from the focus as from the directrix.
  • y² = ±4ax has its axis along the x-axis; x² = ±4ay along the y-axis.
  • Focus at distance a from the vertex, directrix at distance a on the other side.
  • Latus rectum = 4a.
Read the full lesson

Lesson 4

The ellipse: foci, axes, eccentricity and latus rectum

An ellipse is the set of all points in a plane the sum of whose distances from two fixed points (the foci) is a constant.

Ellipse with centre at the origin and major axis along the x-axis: x²/a² + y²/b² = 1 (a > b). With major axis along the y-axis: x²/b² + y²/a² = 1.

The two standard ellipses

  • x²/a² + y²/b² = 1
    • Major axis on the x-axis
    • Vertices (±a, 0)
    • Foci (±c, 0)
    • Ends of minor axis (0, ±b)
  • x²/b² + y²/a² = 1
    • Major axis on the y-axis
    • Vertices (0, ±a)
    • Foci (0, ±c)
    • Ends of minor axis (±b, 0)
In both: a > b, c² = a² − b², e = c/a, latus rectum 2b²/a
  • Sum of focal distances = 2a; a² = b² + c²; e = c/a with 0 < e < 1.
  • The larger denominator decides the major axis.
  • Foci lie on the major axis at (±c, 0) or (0, ±c).
  • Latus rectum = 2b²/a.
Read the full lesson

Lesson 5

The hyperbola: transverse axis, eccentricity and standard equations

A hyperbola is the set of all points in a plane the difference of whose distances from two fixed points (the foci) is a constant.

Hyperbola with transverse axis along the x-axis: x²/a² − y²/b² = 1. With transverse axis along the y-axis: y²/a² − x²/b² = 1. Here c² = a² + b².

Ellipse and hyperbola side by side

  • Ellipse
    • Sum of focal distances = 2a
    • c² = a² − b²
    • 0 < e < 1
    • x²/a² + y²/b² = 1
    • Closed curve; major axis by the larger denominator
  • Hyperbola
    • Difference of focal distances = 2a
    • c² = a² + b²
    • e > 1
    • x²/a² − y²/b² = 1
    • Two open branches; transverse axis by the positive term
Both have latus rectum 2b²/a and foci at distance ae from the centre
  • Difference of focal distances = 2a; c² = a² + b²; e = c/a > 1.
  • The transverse axis goes with the positive squared term.
  • No part of x²/a² − y²/b² = 1 lies strictly between x = −a and x = a.
  • Latus rectum = 2b²/a; a = b gives an equilateral hyperbola with e = √2.
Read the full lesson

Privacy · Terms · Refunds · Delivery